|
|
Mubychem Group, established in 1976, is the pioneer manufacturer of Zinc Chloride, Ammonium Chloride, Calcium Chloride, Potassium Chloride, Sodium Acetate, Sodium Thiosulphate, Aluminum Sulfate, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India. |
For Translating this page in your language use this translation tool (Refresh if the tool is not seen). |
--------
--------
Aluminum Sulfate MSDS Aluminium Sulphate Manufacturers
Buy Aluminum Sulfate or Aluminium Sulphate; Door Delivery
Aluminum Sulfate USP; Aluminium Sulphate BP IP FCC ACS
Aluminum Sulfate
Technical & Pure; Anhydrous & Hydrate Crystals
Also IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
1. Product Identification
Synonyms: Sulfuric acid, aluminum salt (3:2), octadecahydrate; Cake alum; Patent alumCAS No.: 10043-01-3 (Anhydrous) 7784-31-8 (Octadecahydrate)
Molecular Weight: 666.44
Chemical Formula: Al2(SO4)3.18H2O
2. Composition/Information on Ingredients
Ingredient: Aluminum Sulfate; Aluminium SulphateCAS No.: 10043-01-3
Percent: 98 - 100%
Hazardous: Yes
3. Hazards Identification
Potential Acute Health Effects:Hazardous in case of skin contact (irritant), of eye contact (irritant), of inhalation (lung irritant). Slightly hazardous in case of ingestion.
Potential Chronic Health Effects:
Carcinogenic Effects: Not available.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
DEVELOPMENTAL TOXICITY: The substance may be toxic to the reproductive system, mucous membranes, skin, eyes, Urinary System. Repeated or prolonged exposure to the substance can produce target organs damage.
4. First Aid Measures
Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.Ingestion: If swallowed, DO NOT INDUCE VOMITING. Give large quantities of water. Never give anything by mouth to an unconscious person. Get medical attention immediately.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention.
5. Fire Fighting Measures
Fire: Aluminum Sulfate or Aluminium Sulphate is not considered to be a fire hazard.Explosion: Not considered to be an explosion hazard.
Fire Extinguishing Media: Keep in mind that addition of water can cause the formation of sulfuric acid.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to authority requirements.Large Spill: Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface drain.
7. Handling and Storage
Keep Aluminum Sulfate or Aluminium Sulphate in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Aluminum sulfate absorbs moisture and becomes a safety hazard when spilled because it absorbs moisture and becomes slippery. Containers of Aluminum Sulfate or Aluminium Sulphate may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.8. Exposure Controls/Personal Protection
Airborne Exposure Limits:-OSHA Permissible Exposure Limit (PEL):
15 mg/m3 (TWA) total dust and 5 mg/m3 (TWA)
respirable fraction for Aluminum metal as Al.
-ACGIH Threshold Limit Value (TLV):
1 mg/m3 respirable fraction (TWA), Aluminum metal and Insoluble compounds, A4.
Ventilation System:
A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved):
If the exposure limit is exceeded and engineering controls are not feasible, a half face piece particulate respirator (NIOSH type N95 or better filters) may be worn for up to ten times the exposure limit or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest.. A full-face piece particulate respirator (NIOSH type N100 filters) may be worn up to 50 times the exposure limit, or the maximum use concentration specified by the appropriate regulatory agency, or respirator supplier, whichever is lowest. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face piece positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection:
Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection:
Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
9. Physical and Chemical Properties
Appearance: Aluminum Sulfate or Aluminium Sulphate is colorless crystals.Odor: Odorless.
Solubility: 87 g/100 cc water @ 0C (32F).
Specific Gravity: 1.69 @ 17C/4C
pH: No information found.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: No information found.
Melting Point: 87C (189F) Decomposes.
Vapor Density (Air=1): No information found.
Vapor Pressure (mm Hg): No information found.
Evaporation Rate (BuAc=1): No information found.
10. Stability and Reactivity
Stability: Aluminum Sulfate or Aluminium Sulphate is stable under ordinary conditions of use and storage.Hazardous Decomposition Products: Hydrolyzes to form dilute sulfuric acid. Toxic and corrosive oxides of sulfur may be formed when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Corrosive to metals in the presence of water.
Conditions to Avoid: Moisture and incompatibles.
11. Toxicological Information
Anhydrous Material: Oral mouse LD50: 6207 mg/kg; Irritation eyes rabbit: 10 mg/24H severe; investigated as a mutagen and reproductive effecter.18-Hydrate: Oral mouse LD50: > 9 gm/kg; investigated as a mutagen.
--------\Cancer Lists\-----------------------------------------------
---NTP Carcinogen---
Ingredient Known Anticipated IARC Category
------------------------------ ----- ----------- -------------
Aluminum Sulfate (10043-01-3) No No None
12. Ecological Information
Environmental Fate: No information found.Environmental Toxicity: No information found.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.14. Transport Information
Not regulated.15. Regulatory Information
--------\Chemical Inventory Status - Part 1\---------------------------------
Ingredient TSCA EC Japan Australia
----------------------------------------------- ---- --- ----- ---------
Aluminum Sulfate (10043-01-3) Yes Yes Yes Yes
--------\Chemical Inventory Status - Part 2\---------------------------------
--Canada--
Ingredient Korea DSL NDSL Phil.
----------------------------------------------- ----- --- ---- -----
Aluminum Sulfate (10043-01-3) Yes Yes No No
--------\Federal, State & International Regulations - Part 1\----------------
-SARA 302- ------SARA 313------
Ingredient RQ TPQ List Chemical Catg.
----------------------------------------- --- ----- ---- --------------
Aluminum Sulfate (10043-01-3) No No No No
--------\Federal, State & International Regulations - Part 2\----------------
-RCRA- -TSCA-
Ingredient CERCLA 261.33 8(d)
----------------------------------------- ------ ------ ------
Aluminum Sulfate (10043-01-3) 5000 No No
Chemical Weapons Convention: No TSCA 12(b): No CDTA: No
SARA 311/312: Acute: Yes Chronic: No Fire: No Pressure: No
Reactivity: No (Mixture / Solid)
Australian Hazchem Code: None allocated.
Poison Schedule: None allocated.
16. Other Information
NFPA Ratings: Health: 2 Flammability: 0 Reactivity: 0Label Hazard Warning:
WARNING! HARMFUL IF SWALLOWED OR INHALED. CAUSES IRRITATION TO SKIN, EYES AND RESPIRATORY TRACT.
Label Precautions:
Avoid breathing dust.
Keep container closed.
Use only with adequate ventilation.
Wash thoroughly after handling.
Avoid contact with eyes, skin and clothing.
Label First Aid:
If swallowed, DO NOT INDUCE VOMITING. Give large quantities of water. Never give anything by mouth to an unconscious person. If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. In case of contact, wipe off excess material from skin then immediately flush eyes or skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash clothing before reuse. In all cases, get medical attention.
Disclaimer:
***************************************************************************************************
Our company provides this Aluminum Sulfate MSDS information contained
herein in good faith but makes no representation as to its comprehensiveness
or accuracy. This Aluminium Sulphate MSDS sheet is intended only as a
guide to the appropriate precautionary handling of the material by a
properly trained person using this product. Individuals receiving the
information must exercise their independent judgment in determining its
appropriateness for a particular purpose.
***************************************************************************************************
Aluminium Sulphate manufacturers; Aluminum Sulfate manufacturers:
MUBY
CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK
ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100,
23726950, 23774610, 23723564. FAX: 91-22-23728264
e-mail:
info@mubychem.com
Cell Call to Anmol:
+91-9821870100
USA & Canadian Customers may Call 773-829-5811
Copyright and Usual Disclaimer is
Applicable.
Last updated
06 December, 2011
----------------
| Old Spice: Manufacturing since more than Three Decades: | |||
|
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals |
|||
| Borax; Sodium Borate | |||
| Calcium Chloride | |||
| Chromic Chloride | |||
| Manganese Chloride | Manganese Sulfate | Methylene Blue | Potassium Chloride |
| Sodium Acetate | Sodium Hydroxide | Sodium Thiosulfate | |
| Zinc Chloride | |||
|
Pharmaceuticals & Food Grade, IP BP USP FCC ACS Gr. of Chemicals mfd. by Anmol Chemicals |
|||
| Sodium Citrate | Titanium Dioxide | ||
| Zinc Carbonate | |||
| Aluminum Sulphate Manufacturers | |||
Global or International Aluminum sulfate - Aluminium Sulphate Suppliers, Exporters, Importers, Manufacturers
Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc.
----------------