|
|
Mubychem Group, established in 1976, is the pioneer manufacturer of Zinc Chloride, Ammonium Chloride, Calcium Chloride, Potassium Chloride, Sodium Acetate, Sodium Thiosulphate, Benzyl Alcohol, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India. |
For Translating this page in your language use this translation tool (Refresh if the tool is not seen). |
--------
--------
Benzyl Alcohol Manufacturers; MSDS
Benzyl Alcohol
IP BP Ph. Eur. USP-NF ACS AR LR FCC Food Grades
Benzyl Alcohol MSDS Sheet, Material safety Data Sheet
1. Product Identification
Synonyms: Benzenecarbinol;
benzenemethanol; alpha-hydroxytoluene; Phenylmethyl alcohol; Phenyl carbinol
CAS No.: 100-51-6
Molecular Weight: 108.14
Chemical Formula: C6H5CH2OH
2. Composition/Information on Ingredients
Ingredient: Benzyl AlcoholCAS No.: 100-51-6
3. Hazards Identification
Potential Acute Health Effects:
Hazardous
in case of skin contact (irritant), of eye contact (irritant), of inhalation.
Slightly hazardous in case of skin contact (permeator), of ingestion.
Potential Chronic Health Effects:
Slightly
hazardous in case of skin contact (sensitizer).
Carcinogenic Effects: Not available.
Mutagenic
Effects: Mutagenic for bacteria and/or yeast.
Teratogenic
Effects: Not available.
Developmental Toxicity: Not available.
Repeated or
prolonged exposure to the substance can produce target organs damage. The
substance may be toxic to liver, central nervous system (CNS).
4. First Aid Measures
Inhalation: If Benzyl Alcohol inhaled, remove to fresh air. If not
breathing, give artificial respiration. If breathing is difficult, give oxygen.
Get medical attention.
Ingestion: Give large amounts of water to drink. Never give anything by
mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15
minutes. Remove contaminated clothing and shoes. Get medical attention. Wash
clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Check for and remove any contact lenses. Immediately flush
eyes with running water for at least 15 minutes, keeping eyelids open. Cold
water may be used. Get medical attention.
5. Fire Fighting Measures
Fire: Flash point: 93C (199F)
Auto ignition
temperature: 436C (817F)
Combustible. High heat or direct flame is
necessary to cause ignition.
Explosion: Above the flash
point, explosive vapor-air mixtures may be formed.
Fire
Extinguishing Media: Dry chemical, foam or carbon dioxide. Do not
use a solid stream of water, since the stream will scatter and spread
the fire. Water spray may be used to keep fire exposed containers cool.
Special Information: In the event of a fire, wear full
protective clothing and NIOSH-approved self-contained breathing
apparatus with full face piece operated in the pressure demand or other
positive pressure mode.
6. Accidental Release Measures
Small Spill: Dilute with
water and mop up, or absorb with an inert dry material and place in an
appropriate waste disposal container. Finish cleaning by spreading water on the
contaminated surface and dispose of according to local and regional authority
requirements.
Large Spill: Benzyl Alcohol is Combustible material. Keep away
from heat. Keep away from sources of ignition. Stop leak if without
risk. Finish cleaning by spreading water on the contaminated surface and
allow to evacuate through the sanitary system.
7. Handling and Storage
Protect against physical damage. Outside or detached storage is preferred. Inside storage should be in a standard flammable liquids storage room or cabinet. Separate from oxidizing materials. Storage and use areas should be No Smoking areas. Containers of Benzyl Alcohol may be hazardous when empty since they retain product residues (vapors, liquid); observe all warnings and precautions listed for the product.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits:
AIHA Workplace Environmental Exposure Level (WEEL):10 ppm, 8-hour, TWA
Ventilation System: A system of local and/or general exhaust is
recommended to keep employee exposures as low as possible. Local exhaust
ventilation is generally preferred because it can control the emissions of the
contaminant at its source, preventing dispersion of it into the general work
area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of
Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to the substance is apparent and
engineering controls are not feasible, consult an industrial hygienist. For
emergencies, or instances where the exposure levels are not known, use a
full-face piece positive-pressure, air-supplied respirator. WARNING: Air
purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear impervious protective clothing, including boots,
gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or a full face shield
where splashing is possible. Maintain eye wash fountain and quick-drench
facilities in work area.
9. Physical and Chemical Properties
Appearance: Benzyl Alcohol
is clear, colorless liquid.
Odor: Faint aromatic odor.
Solubility: 1g/25ml water @ 17C
Specific Gravity: 1.05 @ 20C/4C
pH: No information found.
% Volatiles by volume @ 21C (70F): 100
Boiling Point: 205C (401F)
Melting Point: -15C (5F)
Vapor Density (Air=1): 3.72
Vapor Pressure (mm Hg): 0.15 @ 25C (77F)
Evaporation Rate (BuAc=1): 1.8 (Ether = 1)
10. Stability and Reactivity
Stability: Benzyl Alcohol
is stable under ordinary conditions of use and storage. Undergoes slow oxidation
in the presence of air or oxygen to form benzaldehyde and benzoic acid.
Hazardous Decomposition Products: Carbon dioxide and carbon monoxide may
form when heated to decomposition.
Hazardous Polymerization: When heated past 100C, Benzyl Alcohol
containing hydrogen bromide and dissolved iron may polymerize with a rapid
increase in temperature.
Incompatibilities: Acids, oxidizing agents, and aluminum. Will attack
some plastics.
Conditions to Avoid: Heat, flames, ignition sources and incompatibles.
11. Toxicological Information
Oral rat LD50: 1230 mg/kg; skin rabbit LD50: 2000 mg/kg; irritation, skin rabbit, standard Draize, 100 mg/24-hour, open, moderate; investigated as a tumorigen, mutagen, reproductive effector.
--------\Cancer
Lists\-----------------------------------------------------
-----------------------------------NTP Carcinogen---
Ingredient Known Anticipated IARC Category
Benzyl Alcohol (100-51-6) No No None
Environmental Fate:
When released into the soil, this material is expected to leach into
groundwater. When released into the soil, this material may evaporate to a
moderate extent. When released into the soil, this material may biodegrade to a
moderate extent. When released into water, this material is not expected to
evaporate significantly. When released into water, this material may biodegrade
to a moderate extent. This material has an estimated bio concentration factor
(BCF) of less than 100. This material is not expected to significantly
bio accumulate. When released into the air, this material is expected to be
readily degraded by reaction with photo chemically produced hydroxyl radicals.
When released into the air, this material is expected to have a half-life
between 1 and 10 days. When released into the air, this material may be removed
from the atmosphere to a moderate extent by wet deposition.
Environmental Toxicity:
The LC50/96-hour values for fish are from 10 to over 100 mg/l. This material may
be toxic to aquatic life.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.
14. Transport Information
Not regulated.
15. Regulatory Information
--------\Chemical Inventory Status - Part 1\---------------------------------
Ingredient TSCA EC Japan Australia
----------------------------------------------- ---- --- ----- ---------
Benzyl Alcohol (100-51-6) Yes Yes Yes Yes
--------\Chemical Inventory Status - Part 2\---------------------------------
--Canada--
Ingredient Korea DSL NDSL Phil.
----------------------------------------------- ----- --- ---- -----
Benzyl Alcohol (100-51-6) Yes Yes No Yes
--------\Federal, State & International Regulations - Part 1\----------------
-SARA 302- ------SARA 313------
Ingredient RQ TPQ List Chemical Catg.
----------------------------------------- --- ----- ---- --------------
Benzyl Alcohol (100-51-6) No No No No
--------\Federal, State & International Regulations - Part 2\----------------
-RCRA- -TSCA-Ingredient CERCLA 261.33 8(d)
----------------------------------------- ------ ------ ------
Benzyl Alcohol (100-51-6) No No No
Chemical Weapons Convention: No TSCA 12(b): No CDTA: No
SARA 311/312: Acute: Yes; Chronic: Yes; Fire: Yes; Pressure: No
Reactivity: No (Pure / Liquid)
Australian Hazchem Code: None allocated.
Poison
Schedule: None allocated. OSHA: Hazardous by definition of Hazard
Communication Standard (29 CFR 1910.1200).
EINECS: This product is on the European Inventory of Existing Commercial Chemical Substances.
WHMIS (Canada):
CLASS B-3: Combustible liquid with a flash point between 37.8°C (100°F) and 93.3°C (200°F). CLASS D-2B: Material causing other toxic effects (TOXIC).
DSCL (EEC): R20/22- Harmful by inhalation and if swallowed. S26- In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
HMIS (U.S.A.):
Health Hazard: 2
Fire Hazard: 2
Reactivity: 0
Personal Protection:
National Fire Protection Association (U.S.A.):
Health: 1
Flammability: 1
Reactivity: 0
Specific hazard:
Protective Equipment:
Gloves. Lab coat. Vapor respirator. Be sure to use an approved/certified respirator or equivalent. Wear appropriate respirator when ventilation is inadequate. Splash goggles.
16. Other Information
Disclaimer:
**********************************************************************************************************************
Our company provides this Benzyl Alcohol MSDS information contained herein
in good faith but makes no representation as to its comprehensiveness or
accuracy. This Benzyl Alcohol MSDS sheet is intended only as a guide to
the appropriate precautionary handling of the material by a properly trained
person using this product. Individuals receiving the information must exercise
their independent judgment in determining its appropriateness for a particular
purpose.
**********************************************************************************************************************
Benzyl Alcohol Manufacturers:
MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD,
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950,
23774610, 23723564. FAX: 91-22-23728264
e-mail:
info@mubychem.com
Cell Call
to Anmol: +91-9821870100
USA & Canadian Customers may Call
773-829-5811
Copyright and Usual Disclaimer is
Applicable.
Last updated
29 November, 2011
----------------
| Old Spice: Manufacturing since more than Three Decades: | |||
|
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals |
|||
| Borax; Sodium Borate | |||
| Calcium Chloride | |||
| Chromic Chloride | |||
| Manganese Chloride | Manganese Sulfate | Methylene Blue | Potassium Chloride |
| Sodium Acetate | Sodium Hydroxide | Sodium Thiosulfate | |
| Zinc Chloride | |||
|
Pharmaceuticals & Food Grade, IP BP USP FCC ACS Gr. of Chemicals mfd. by Anmol Chemicals |
|||
| Sodium Citrate | Titanium Dioxide | ||
| Zinc Carbonate | |||
| Aluminum Ammonium Sulfate Manufacturers |
|
||
Global or International Benzyl Alcohol Suppliers, Exporters, Importers, Manufacturers
Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc.
----------------