|
|
Mubychem Group, established in 1976, is the pioneer manufacturer of Zinc Chloride, Ammonium Chloride, Calcium Chloride, Potassium Chloride, Sodium Acetate, Sodium Thiosulphate, Potassium Alum, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India. |
For Translating this page in your language use this translation tool (Refresh if the tool is not seen). |
--------
--------
Potassium Alum Manufacturers Aluminum Potassium Sulfate Potash Alum Manufacturers; MSDS
Buy Potassium Alum; Door Delivery
Potash Alum
Technical & Pure Crystals
Also IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
Potassium Alum MSDS Sheet, Material safety Data Sheet
1. Product IdentificationSynonyms: Sulfuric acid, aluminum potassium salt (2:1:1),
dodecahydrate; potassium alum dodecahydrate; Alum Potassium USP Powder
TAC; Potassium alum; Potash alum; Alum; Kalinite
CAS No.: 10043-67-1 (Anhydrous) 7784-24-9 (Dodecahydrate)
Molecular Weight: 474.38
Chemical Formula: AlK(SO4)2 12H2O
2. Composition/Information on Ingredients
Ingredient: Sulfuric Acid, Aluminum Potassium Salt (2:1:1) or Potash Alum or Potassium Alum or Aluminum Potassium SulfateCAS No.: 10043-67-1
Percent: 98 - 100%
Hazardous: Yes
3. Hazards Identification
Potential Acute Health Effects: Potash Alum is hazardous in case of skin
contact (irritant), of eye contact (irritant), of ingestion, of
inhalation.
Potential Chronic Health Effects:
Carcinogenic Effects: Not available.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
Repeated or prolonged exposure is not known to aggravate medical
condition.
4. First Aid Measures
Inhalation: If Potassium Alum or Aluminum Potassium Sulfate is inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.Ingestion: If swallowed, DO NOT INDUCE VOMITING. Give large quantities of water. Never give anything by mouth to an unconscious person. Get medical attention immediately.
Skin Contact: In case of contact with Potash Alum, immediately flush skin with plenty of water. Cover the irritated skin with an emollient. Remove contaminated clothing and shoes. Cold water may be used. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention.
5. Fire Fighting Measures
Fire: Potassium Alum or Aluminum Potassium Sulfate is not considered to be a fire hazard.Explosion: Potash Alum is not considered to be an explosion hazard.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire. Keep in mind that addition of water can cause the formation of sulfuric acid.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Cover spill with soda ash and mix. Ventilate area of leak or spill. Keep unnecessary and unprotected people away from area of spill. Wear appropriate personal protective equipment. Pick up spills and place in a suitable container for reclamation or disposal, using a method that does not generate dust.7. Handling and Storage
Keep Potassium Alum or Aluminum Potassium Sulfate in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Isolate from incompatible substances. Containers of Potassium Alum or Aluminum Potassium Sulfate may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product Potash Alum.8. Exposure Controls/Personal Protection
Airborne Exposure Limits:-OSHA Permissible Exposure Limit (PEL):
15 mg/m3 (TWA) total dust and 5 mg/m3 (TWA)
respirable fraction for Aluminum metal as Al.
-ACGIH Threshold Limit Value (TLV):
1 mg/m3 respirable fraction (TWA), Aluminum metal and Insoluble compounds, A4.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): If the exposure limit is exceeded and engineering controls are not feasible, a half face piece particulate respirator (NIOSH type N95 or better filters) may be worn for up to ten times the exposure limit or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest.. A full-face piece particulate respirator (NIOSH type N100 filters) may be worn up to 50 times the exposure limit, or the maximum use concentration specified by the appropriate regulatory agency, or respirator supplier, whichever is lowest. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face piece positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
9. Physical and Chemical Properties
Appearance: Potassium Alum or Aluminum Potassium Sulfate is colorless crystals.Odor: Potash Alum is odorless.
Solubility: 14% in water, 333% in boiling water
Density: 1.73
pH: 3.3 (0.2 M solution)
% Volatiles by volume @ 21C (70F): 0
Boiling Point: ca. 200C (ca. 392F) Loses water
Melting Point: 92.5C (198F)
10. Stability and Reactivity
Stability: Potassium Alum or Aluminum Potassium Sulfate is stable under ordinary conditions of use and storage.Hazardous Decomposition Products: Hydrolyzes to form dilute sulfuric acid. Toxic and corrosive oxides of sulfur may be formed when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Potash Alum is corrosive to metals in the presence of water.
Conditions to Avoid: Moisture and incompatibles.
11. Toxicological Information
Investigated as a reproductive effector.
--------\Cancer Lists\------------------------------------------------------
------------------------------------- NTP Carcinogen---
Ingredient ------------------------- Known Anticipated IARC Category
------------------------------------ ------- ----------- ----------------
Sulfuric Acid, Aluminum Potassium - No ------- No ----------- None
Salt (2:1:1) (10043-67-1)
12. Ecological Information
Environmental Fate: No information found.Environmental Toxicity: No information found.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused Potash Alum in accordance with federal, state and local requirements.14. Transport Information
Not regulated.15. Regulatory Information
--------\Chemical Inventory Status - Part 1\---------------------------------
Ingredient TSCA EC Japan Australia
----------------------------------------------- ---- --- ----- ---------
Sulfuric Acid, Aluminum Potassium Salt (2:1:1) Yes Yes Yes Yes
(10043-67-1)
--------\Chemical Inventory Status - Part 2\---------------------------------
--Canada--
Ingredient Korea DSL NDSL Phil.
----------------------------------------------- ----- --- ---- -----
Sulfuric Acid, Aluminum Potassium Salt (2:1:1) Yes Yes No Yes
(10043-67-1)
--------\Federal, State & International Regulations - Part 1\----------------
-SARA 302- ------SARA 313------
Ingredient RQ TPQ List Chemical Catg.
----------------------------------------- --- ----- ---- --------------
Sulfuric Acid, Aluminum Potassium Salt No No No No
(2:1:1) (10043-67-1)
--------\Federal, State & International Regulations - Part 2\----------------
-RCRA- -TSCA-
Ingredient CERCLA 261.33 8(d)
----------------------------------------- ------ ------ ------
Sulfuric Acid, Aluminum Potassium Salt No No No
(2:1:1) (10043-67-1)
Chemical Weapons Convention: No; TSCA 12(b): No; CDTA: No
SARA 311/312: Acute: Yes; Chronic: No; Fire: No; Pressure: No
Reactivity: No (Pure / Solid)
Australian Hazchem Code: None allocated. Poison Schedule: None allocated.
16. Other Information
NFPA Ratings: Health: 1 Flammability: 0 Reactivity: 0Label Hazard Warning:
WARNING! HARMFUL IF SWALLOWED OR INHALED. CAUSES IRRITATION TO SKIN, EYES AND RESPIRATORY TRACT.
Label Precautions:
Avoid breathing dust.
Keep container closed.
Use only with adequate ventilation.
Wash thoroughly after handling.
Avoid contact with eyes, skin and clothing.
Label First Aid:
If swallowed, DO NOT INDUCE VOMITING. Give large quantities of water. Never give anything by mouth to an unconscious person. If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. In case of contact, wipe off excess material from skin then immediately flush eyes or skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash clothing before reuse. In all cases, get medical attention.
Disclaimer:
***************************************************************************************************
Our company provides this Potassium Alum or Aluminum Potassium Sulfate MSDS information contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Potassium Alum or Aluminum Potassium Sulfate MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
***************************************************************************************************
Buy Potash Alum; Door Delivery
More from Potassium Alum manufacturers
Aluminum Potassium Sulfate Manufacturers at:
MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD,
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950,
23774610, 23723564. FAX: 91-22-23728264
e-mail:
info@mubychem.com
Cell Call
to Anmol: +91-9821870100
USA & Canadian Customers may Call
773-829-5811
Copyright and Usual Disclaimer is
Applicable.
Last updated
15 December, 2011
----------------
| Old Spice: Manufacturing since more than Three Decades: | |||
|
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals |
|||
| Borax; Sodium Borate | |||
| Calcium Chloride | |||
| Chromic Chloride | |||
| Manganese Chloride | Manganese Sulfate | Methylene Blue | Potassium Chloride |
| Sodium Acetate | Sodium Hydroxide | Sodium Thiosulfate | |
| Zinc Chloride | |||
|
Pharmaceuticals & Food Grade, IP BP USP FCC ACS Gr. of Chemicals mfd. by Anmol Chemicals |
|||
| Sodium Citrate | Titanium Dioxide | ||
| Zinc Carbonate | |||
|
|
|||
Global or International Potassium Alum or Potash Alum or Aluminum Potassium Sulfate Suppliers, Exporters, Importers, Manufacturers
Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc.
----------------
If you want your work to be done well, then go to a busy man.
The other one has no time.