|
(FDA) GMP Approved
ISO-9001-2008
Certificate
"REACH"
Pre-registered
Halal Certified
|
Mubychem Group, established in
1976, is the pioneer manufacturer of Zinc Chloride, Ammonium
Chloride, Calcium Chloride, Potassium Chloride, Sodium Acetate,
Sodium Thiosulphate, Pharmaceutical, Fragrance & Flavor chemicals in
India. Mubychem Group has
several manufacturing facilities spread across Gujarat and Maharashtra (Western India). |
For Translating this page in your language use this
translation tool (Refresh if the tool is not seen).
|
For Buying Sodium Monochloroacetate; Sodium chloroacetate
Material Safety Data Sheet MSDS
Chloroacetic Acid Monosodium Salt MSDS
Chloroacetic Acid Sodium Salt MSDS
Sodium Chloroacetate MSDS
Sodium Monochloroacetate MSDS
1. Product Identification
Synonyms: Sodium Chloroacetate; Monoxone; Sodium
Monochloroacetate; Chloroacetic Acid, Sodium Salt.
CAS No.: 3926-62-3
Molecular Weight: 116.48
Chemical Formula: ClCH2COONa
2. Composition/Information on Ingredients
Ingredient
CAS No
Percent
Sodium chloroacetate 3926-62-3 90 - 100%
or Sodium Monochloroacetate
3.
Hazards Identification
Emergency Overview
WARNING! HARMFUL IF SWALLOWED OR INHALED. CAUSES IRRITATION TO SKIN,
EYES AND RESPIRATORY TRACT. Sodium Monochloroacetate or Sodium
Chloroacetate very hazardous in case of skin contact (irritant), of eye
contact (irritant), of ingestion, of inhalation (lung irritant).
Hazardous in case of skin contact (sensitizer), of inhalation (lung
sensitizer). Slightly hazardous in case of skin contact (corrosive,
permeator). Severe over-exposure can result in death. Inflammation of
the eye is characterized by redness, watering, and itching. Skin
inflammation is characterized by itching, scaling, reddening or
occasionally, blistering.
Lab Protective Equip: GOGGLES; LAB COAT; VENT HOOD; PROPER GLOVES
Storage Color Code: Blue (Health)
Potential Health Effects
Inhalation: Sodium Monochloroacetate or Sodium Chloroacetate causes
irritation to the respiratory tract. Symptoms may include coughing,
shortness of breath.
Ingestion: Tests with laboratory animals indicate this material is toxic
by ingestion. Toxic effects could include convulsions, seizures and
death. Causes irritation to the gastrointestinal tract. Symptoms may
include nausea, vomiting and diarrhea.
Skin Contact: Causes irritation to skin. Symptoms include redness,
itching, and pain.
Eye Contact: Causes irritation, redness, and pain.
4. First Aid Measures
Inhalation: Remove to
fresh air. If not breathing, give artificial respiration. If breathing
is difficult, give oxygen. Get medical attention.
Ingestion: Induce vomiting immediately as directed by medical personnel.
Never give anything by mouth to an unconscious person. Get medical
attention.
Skin Contact: Immediately flush skin with plenty of water for at least
15 minutes. Remove contaminated clothing and shoes. Get medical
attention. Wash clothing before reuse. Thoroughly clean shoes before
reuse.
Eye Contact: Check for and remove any contact lenses. Immediately flush
eyes with running water for at least 15 minutes, keeping eyelids open.
Cold water may be used. Do not use an eye ointment. Seek medical
attention.
5.
Fire Fighting Measures
Fire: Sodium Monochloroacetate or Sodium
Chloroacetate is not expected to be a fire hazard.
Explosion: No information found.
Fire Extinguishing Media: Water spray, dry chemical, alcohol foam, or
carbon dioxide.
Special Information: In the event of a fire, wear full protective
clothing and NIOSH-approved self-contained breathing apparatus with full
face piece operated in the pressure demand or other positive pressure
mode.
6.
Accidental Release Measures
Small Spill: Use appropriate tools to put
the spilled solid in a convenient waste disposal container.
Large Spill: Use a shovel to put the
material into a convenient waste disposal container.
7. Handling and Storage
Keep Sodium Monochloroacetate or Sodium
Chloroacetate in a tightly closed container, stored in a cool, dry,
ventilated area. Protect against physical damage. Isolate from
incompatible substances. Containers of Sodium Monochloroacetate or
Sodium Chloroacetate may be hazardous when empty since they retain
product residues (dust, solids); observe all warnings and precautions
listed for the product.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is
recommended to keep employee exposures as low as possible. Local exhaust
ventilation is generally preferred because it can control the emissions
of the contaminant at its source, preventing dispersion of it into the
general work area. Please refer to the ACGIH document, Industrial
Ventilation, A Manual of Recommended Practices, most recent edition,
for details.
Personal Respirators (NIOSH Approved): For conditions of use where
exposure to dust or mist is apparent and engineering controls are not
feasible, a particulate respirator (NIOSH type N95 or better filters)
may be worn. If oil particles (e.g. lubricants, cutting fluids,
glycerin, etc.) are present, use a NIOSH type R or P filter. For
emergencies or instances where the exposure levels are not known, use a
full-face positive-pressure, air-supplied respirator. WARNING:
Air-purifying respirators do not protect workers in oxygen-deficient
atmospheres.
Skin Protection: Wear protective gloves and clean body-covering
clothing.
Eye Protection: Use chemical safety goggles and/or full face shield
where dusting or splashing of solutions is possible. Maintain eye wash
fountain and quick-drench facilities in work area.
9. Physical and Chemical Properties
Appearance: Sodium Monochloroacetate or Sodium
Chloroacetate is white powder.
Odor: Odorless.
Solubility: Appreciable (> 10%)
Specific Gravity: No information found.
pH: 5.5
% Volatiles by volume @ 21C (70F): 0
Boiling Point: No information found.
Melting Point: 170C (338F)
10. Stability and
Reactivity
Stability: Sodium Monochloroacetate or Sodium
Chloroacetate is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: May emit hydrogen chloride, chlorine,
and oxides of sodium and carbon when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong acids.
Conditions to Avoid: Incompatibles.
11.
Toxicological Information
Sodium Chloroacetate: Oral rat LD50: 95 mg/kg.
--------\Cancer
Lists\------------------------------------------------------
---NTP Carcinogen---
Ingredient
Known Anticipated IARC
Category
------------------------------------
----- ----------- -------------
Sodium chloroacetate (3926-62-3)
No No None
12. Ecological Information
Environmental Fate: No information found.
Environmental Toxicity: No information found.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling
should be managed in an appropriate and approved waste disposal
facility. Processing, use or contamination of this product may change
the waste management options. State and local disposal regulations may
differ from federal disposal regulations. Dispose of Sodium
Monochloroacetate or Sodium Chloroacetate container and unused contents
in accordance with law.
14. Transport Information
Domestic (Land, D.O.T.)
-----------------------
Proper Shipping Name: SODIUM CHLOROACETATE
Hazard Class: 6.1
UN/NA: UN2659
Packing Group: III
Information reported for product/size: 50KG
International (Water, I.M.O.)
-----------------------------
Proper Shipping Name: SODIUM CHLOROACETATE
Hazard Class: 6.1
UN/NA: UN2659
Packing Group: III
Information reported for product/size: 50KG
International (Air, I.C.A.O.)
-----------------------------
Proper Shipping Name: SODIUM CHLOROACETATE
Hazard Class: 6.1
UN/NA: UN2659
Packing Group: III
Information reported for product/size: 50KG
15.
Regulatory Information
--------\Chemical Inventory Status - Part
1\---------------------------------
Ingredient
TSCA EC Japan Australia
-----------------------------------------------
---- --- ----- ---------
Sodium chloroacetate (3926-62-3)
Yes Yes Yes
Yes
--------\Chemical Inventory Status - Part
2\---------------------------------
--Canada--
Ingredient
Korea DSL NDSL Phil.
-----------------------------------------------
----- --- ---- -----
Sodium chloroacetate (3926-62-3)
Yes Yes No Yes
--------\Federal, State & International
Regulations - Part 1\----------------
-SARA 302- ------SARA 313------
Ingredient
RQ TPQ List
Chemical Catg.
-----------------------------------------
--- ----- ---- --------------
Sodium chloroacetate (3926-62-3)
No No No No
--------\Federal, State & International
Regulations - Part 2\----------------
-RCRA- -TSCA-
Ingredient
CERCLA 261.33 8(d)
-----------------------------------------
------ ------
------
Sodium chloroacetate (3926-62-3)
No No No
Chemical Weapons Convention: No TSCA 12(b):
No CDTA: No
SARA 311/312: Acute: Yes Chronic: No Fire:
No Pressure: No
Reactivity: No (Pure / Solid)
Australian Hazchem Code: 2X
16. Other Information
NFPA Ratings: Health: 2 Flammability: 0 Reactivity:
0
Label Hazard Warning:
WARNING! HARMFUL IF SWALLOWED OR INHALED. CAUSES IRRITATION TO SKIN,
EYES AND RESPIRATORY TRACT.
Label Precautions:
Avoid breathing dust.
Keep container closed.
Avoid contact with eyes, skin and clothing.
Use only with adequate ventilation.
Wash thoroughly after handling.
Label First Aid:
If swallowed, induce vomiting immediately as directed by medical
personnel. Never give anything by mouth to an unconscious person. In
case of contact, immediately flush eyes or skin with plenty of water for
at least 15 minutes. Remove contaminated clothing and shoes. Wash
clothing before reuse. If inhaled, remove to fresh air. If not
breathing, give artificial respiration. If breathing is difficult, give
oxygen. In all cases, get medical attention.
Disclaimer:
************************************************************************************************************
Our company provides this Sodium Chloroacetate MSDS MSDS information contained herein in good faith but
makes no representation as to its comprehensiveness or accuracy. This
Sodium Chloroacetate MSDS MSDS document
is intended only as a guide to the appropriate precautionary handling of
the material by a properly trained person using this product.
Individuals receiving the information must exercise their independent
judgment in determining its appropriateness for a particular purpose.
************************************************************************************************************
More
from
Sodium Monochloro
Acetate manufacturers at:
MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER,
MUMBAI 400009, INDIA.
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564.
FAX: 91-22-23728264.
e-mail:
info@mubychem.com
Cell Call
to Anmol: +91-9821870100 or Ambrish: +91-9821570100
Copyright and Usual Disclaimer is
Applicable.
Last updated
30 April, 2010