|
|
Mubychem Group, established in 1976, is the pioneer manufacturer of Zinc Chloride, Ammonium Chloride, Calcium Chloride, Potassium Chloride, Sodium Acetate, Sodium Thiosulfate, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India. |
For Translating this page in your language use this translation tool (Refresh if the tool is not seen). |
Ammonium
Chloride IP
Ammonium Chloride BP
Ammonium Chloride AR LR ACS
Ammonium Chloride Battery Grade
Ammonium Chloride Pellets Tablets
Ammonium Chloride Manufacturers
Ammonium Chloride FCC, Food grade
Ammonium Chloride Anti Caking Grade
Ammonium Chloride USP Grade Manufacturers
Ammonium Chloride USP Grade Manufacturers
Ammonium Chloride
Pure Crystals, Tablets, Blocks, Pellets.
Also IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
Muby Chemicals, established in 1976, is the pioneer manufacturer of Chlorides, and particularly Ammonium Chloride including Ammonium Chloride Anti-caking Grade, Ammonium Chloride Pharmaceutical Grade or Ammonium Chloride Battery Grade. Below is the specifications of Ammonium Chloride USP Grade. Links are also available for other grades of Ammonium Chloride on this page and on other pages of our website. We know about Ammonium Chloride better than any other vendor in the world.
Ammonium Chloride is manufactured by the reaction of Ammonia with Hydrochloric Acid. The reaction is highly exothermic and it is prone to explosion. To control heat the reaction is done in a very large volume of liquor.
NH3 + HCl → NH4Cl
The material so produced is very high quality and the first crop is surpassing all the standards, that are actually based on making Ammonium Chloride from the bye-product solution of Soda Ash plant.
Apart from the high grade Ammonium Chloride that we make by the reaction of Ammonia with Hydrochloric Acid, we also make Ammonium Chloride purified by sublimation. We also make ammonium chloride Bars, Bricks, Granules and Tablets.
Ammonium Chloride USP
Ammonium Chloride BP
Assay— Ammonium
Chloride contains not less than 99.5 percent and not more than 100.5 percent of
NH4Cl, calculated on the dried basis.
Packaging and storage— Preserve in tight containers.
Identification—
A
solution (1 in 10) responds to the tests for Ammonium and for Chloride
pH: between 4.6 and 6.0,
in a solution (1 in 20).
Loss on drying— Dry it
over silica gel for 4 hours: it loses not more than 0.5% of its weight.
Residue on ignition—
Add 1 mL of sulfuric acid to about 2 g, accurately weighed, and heat the mixture
gently until volatilization is complete: the residue is white, and when ignited,
not more than 0.1% of nonvolatile substance remains.
Limit of thiocyanate—
Acidify 10 mL of a solution (1 in 10) with hydrochloric acid, and add a few
drops of ferric chloride TS: no orange-red color is produced.
Heavy metals: 0.001%.
