Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance & Flavor chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Thailand, Malaysia etc. The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-14001, ISO-22000:2005, FSSC 22000; ISO OHSAS 18001; Kosher Certified; Halal Certified; HACCP, FSSAI. We offer Commercial Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
Search our website here
Calcium Sulfate USP grade Manufacturers
Calcium Sulphate BP Grade
Calcium Sulfate USP Grade
Calcium Sulfate Sulphate Manufacturers
Calcium Sulfate ACS AR Analytical Reagent Grade
Calcium Sulfate FCC; Calcium Sulphate Food Grade
Calcium Sulfate Sulphate USP ACS BP IP Analytical Reagent FCC Food grade Manufacturers
MSDS of Calcium Sulfate Sulphate BP USP IP ACS Analytical Reagent FCC Food grade Manufacturers
Calcium Sulfate per US Pharmacopoeia USP
Calcium Sulfate USP
Calcium Sulfate USP
Sulfuric acid, calcium salt (1:1)
Calcium sulfate (1:1) 136.14
Calcium Sulfate is anhydrous or contains two molecules of water of hydration. It contains not less than 98.0 percent and not more than 101.0 percent of CaSO4 i.e. Calcium Sulfate or Calcium Sulphate, calculated on the dried basis.
Labeling— Label it to indicate whether it is Calcium Sulfate anhydrous or the Calcium Sulphate dihydrate.
Identification— Dissolve about 200 mg by warming in a mixture of 4 mL of 3 N hydrochloric acid and 16 mL of water. This solution responds to the tests for Calcium and for Sulfate.
Loss on drying— Dry it at a temperature not lower than 250 to constant weight: the anhydrous form loses not more than 1.5% of its weight, and the dihydrate loses between 19.0% and 23.0% of its weight.
Iron— Dissolve 100 mg in 8 mL of 3 N hydrochloric acid, and dilute with water to 47 mL: the limit is 0.01%.
Heavy metals— Mix 2.0 g with 20 mL of water, add 25 mL of 3 N hydrochloric acid, and heat to boiling to dissolve the test specimen. Cool, and add ammonium hydroxide to a pH of 7. Filter, evaporate to a volume of about 25 mL, and re-filter, if necessary, to obtain a clear solution: the limit is 0.001%.
Assay— Dissolve about 300 mg accurately weighed, in 100 mL of water and 4 mL of 3 N hydrochloric acid. Boil, if necessary, to dissolve, and cool before titrating. While stirring, preferably with a magnetic stirrer, add, in the order named, 0.5 mL of triethanolamine, 300 mg of hydroxy naphthol blue, and, from a 50-mL burette, about 30 mL of 0.05 M edetate disodium VS. Add sodium hydroxide solution (45 in 100) until the initial red color changes to clear blue. Continue to add it drop wise until the color changes to violet, and add an additional 0.5 mL. The pH is between 12.3 and 12.5. Continue the titration drop wise with 0.05 M edetate disodium VS to the appearance of a clear-blue endpoint that persists for not less than 60 seconds. Each mL of 0.05 M edentate disodium is equivalent to 6.807 mg of CaSO4.
Calcium Sulfate USP grade manufacturers:
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) 91-22-23770100, 23726950
Current Date Time in India GMT+5:30
USA & Canadian Customers may
Call toll-free 1-844-682-9243 (1-844-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last 18 August, 2017
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.