Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance & Flavor chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Thailand, Malaysia etc. The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-22000:2005; Kosher Certified; Halal Certified; HACCP FSSAI. We offer Commercial Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
Search our website here
Calcium Sulphate BP grade Manufacturers
Calcium Sulphate BP Grade
Calcium Sulfate USP Grade
Calcium Sulfate Sulphate Manufacturers
Calcium Sulfate ACS AR Analytical Reagent Grade
Calcium Sulfate FCC; Calcium Sulphate Food Grade
Calcium Sulfate Sulphate USP ACS BP IP Analytical Reagent FCC Food grade Manufacturers
MSDS of Calcium Sulfate Sulphate BP USP IP ACS Analytical Reagent FCC Food grade Manufacturers
Calcium Sulphate as per British Pharmacopoeia 2009
Calcium Sulphate Dihydrate BP
CaSO4,2H2O ... 172.2
Action and use
98.0 per cent to 102.0 per cent of CaSO4,2H2O i.e. Calcium Sulphate Dihydrate or Calcium Sulfate Dihydrate.
White or almost white fine powder.
Very slightly soluble in water, practically insoluble in ethanol (96 per cent).
Loss on ignition.
Solution S gives reaction of sulphates.
Solution S gives reaction of calcium.
Dissolve 1.0 g in 50 ml of a 10 per cent V/V solution of hydrochloric acid R by heating at 50°C for 5 min. Allow to cool.
Acidity or alkalinity
Shake 1.5 g with 15 ml of carbon dioxide-free water for 5 min. Allow to stand for 5 min and filter. To 10 ml of the filtrate add 0.1 ml of phenolphthalein solution and 0.25 ml of 0.01 M sodium hydroxide. The solution is red. Add 0.30 ml of 0.01 M hydrochloric acid. The solution is colourless. Add 0.2 ml of methyl red solution. The solution is reddish-orange.
Maximum 300 ppm.
Shake 0.5 g with 15 ml of water R for 5 min. Allow to stand for 15 min and filter. Dilute 5 ml of the filtrate to 15 ml with water.
Maximum 10 ppm, determined on 5 ml of solution S.
Maximum 100 ppm.
To 0.25 g add a mixture of 5 ml of hydrochloric acid R and 20 ml of water R. Heat to boiling, cool and filter.
Maximum 20 ppm.
To 2.5 g add a mixture of 2 ml of hydrochloric acid R and 15 ml of water R. Heat to boiling. Cool and then add 0.5 ml of phenolphthalein solution R. Cautiously add concentrated ammonia until the colour changes to pink. Add 0.5 ml of glacial acetic acid R and dilute to 25 ml with water R. Filter. 12 ml of the filtrate complies with test A. Prepare the reference solution using lead standard solution (2 ppm Pb.
Loss on ignition
18.0 per cent to 22.0 per cent, determined on 1.000 g by ignition to constant mass at 800 ± 50C.
Dissolve 0.150 g in 120 ml of water. Carry out the complex o metric titration of calcium.
1 ml of 0.1 M sodium edetate is equivalent to 17.22 mg of CaSO4,2H2O.
Calcium Sulphate BP Grade manufacturers:
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) 91-22-23770100, 23726950
Current Date Time in India GMT+5:30
USA & Canadian Customers may
Call toll-free 1-844-682-9243 (1-844-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last 19 May, 2017
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.