|
(FDA) GMP Approved ISO-22000:2005 Kosher Certified Halal Certified HACCP |
Mubychem Group, established in 1976, is the pioneer manufacturer of Zinc Chloride, Ammonium Chloride, Calcium Chloride, Potassium Chloride, Sodium Acetate, Sodium Thiosulphate, Potassium acetate, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India. |
For Translating this page in your language use this translation tool (Refresh if the tool is not seen). |
--------
--------
Potassium Acetate USP, Potassium Acetate BP Manufacturers
BP IP ACS Pure
CAS No.: 127-08-2, Molecular Weight: 98.14, Chemical Formula: C2H3O2K
Buy-Potassium-Acetate
For MSDS Sheet Click
MSDS of Potassium
Acetate Manufacturers
Potassium Acetate
Technical & Pure
Also IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
Potassium Acetate BP
C2H3O2K 98.14 127-08-2DEFINITION
Potassium acetate contains not less than 99.0 per cent and not more than
the equivalent of 101.0 per cent of C2H3KO2,
calculated with reference to the dried substance.
CHARACTERS
A white, crystalline powder or colourless crystals,
deliquescent, very soluble in water, freely soluble in alcohol.
A. It gives reaction of acetates.
B. It gives reaction of potassium.
TESTS
Solution S
Dissolve 10.0 g in distilled water and
dilute to 100 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
pH
Dissolve 1.0 g in carbon dioxide-free water and dilute to 20 ml
with the same solvent. The pH of the solution is 7.5 to 9.0.
Reducing substances
Dilute 10 ml of solution S to 100 ml with water. Add 5 ml of
dilute sulphuric acid and 0.5 ml of a 0.32 g/l solution of potassium
permanganate. Mix and boil gently for 5 min. The solution remains pink.
Chlorides
Dilute 2.5 ml of solution S to 15 ml with water. The solution
complies with the limit test for chlorides (200 ppm).
Sulphates
Dilute 7.5 ml of solution S to 15 ml with distilled water. The
solution complies with the limit test for sulphates (200 ppm).
Aluminium
If intended for use in the manufacture of peritoneal dialysis solutions,
haemofiltration solutions or hem dialysis solutions, it complies with the
test for aluminium. Dissolve 2.0 g in 50 ml of water and add 5 ml of
acetate buffer solution pH 6.0. The solution complies with the limit
test for aluminium (1 ppm). Use as a reference solution a mixture of 1 ml
of aluminium standard solution (2 ppm Al), 5 ml of acetate buffer
solution pH 6.0 R and 49 ml of water. To prepare the blank use a
mixture of 5 ml of acetate buffer solution pH 6.0 R and 50 ml of water.
Iron
Dilute 5 ml of solution S to 10 ml with water. The solution
complies with the limit test for iron (20 ppm).
Heavy metals
Dissolve 5.0 g in
water and dilute to 20 ml with the same
solvent. 12 ml of the solution complies with limit test A for heavy metals
(4 ppm). Prepare the standard using lead standard solution (1 ppm Pb).
Sodium
Not more than 0.5 per cent of Na, determined by atomic emission
Loss on drying
Not more than 3.0 per cent, determined on 1.000 g by drying in an oven
at 100 °C to 105C.
Potassium Acetate USP
Potassium AcetateC2H3KO2 98.14
Acetic acid, potassium salt.
Potassium acetate [127-08-2].
Potassium Acetate contains not less than 99.0 percent and not more than 100.5 percent of C2H3KO2, calculated on the dried basis.
Identification— A
solution (1 in 10) responds to the tests for Potassium and for Acetate.
pH: between 7.5 and
8.5, in a solution (1 in 20).
Loss on drying— Dry it at 150 for 2 hours: it loses not more than
1.0% of its weight.
Heavy metals—
the limit is 0.002%.
Limit of sodium— To pass the test not more than 0.03% of sodium is
found.
ACS Specifications
American Chemical Society
Potassium Acetate ACS
CH3COOKFormula Wt 98.14
CAS Number 127-08-2
REQUIREMENTS
Assay
99.0% CH3COOK
pH of a 5% solution
6.5-9.0 at 25C
MAXIMUM ALLOWABLE
Insoluble matter ........... 0.005%
Chloride (Cl)
............... 0.003%
Phosphate (PO4) ........ 0.001%
Sulfate (SO4)
............. 0.002%
Heavy metals (as Pb) .. 5 ppm
Iron (Fe)
..................... 5 ppm
Calcium (Ca) .............. 0.005%
Magnesium (Mg)
........ 0.002%
Sodium (Na) .............. 0.03%
Potassium Acetate BP
Potassium Acetate USP
Potassium Acetate
Manufacturers:
MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX:
91-22-23728264
e-mail:
info@mubychem.com
Cell Call
to Anmol: +91-9821870100
USA & Canadian Customers may Call
773-829-5811
Copyright
and Usual
Disclaimer
is Applicable.
Last
updated: 10 December, 2011.
----------------
|
Old Spice: Manufacturing since more than Three Decades: |
|||
|
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals |
|||
| Borax; Sodium Borate | |||
| Calcium Chloride | |||
| Chromic Chloride | |||
| Manganese Chloride | Manganese Sulfate | Methylene Blue | Potassium Chloride |
| Sodium Acetate | Sodium Hydroxide | Sodium Thiosulfate | |
| Zinc Chloride | |||
|
Pharmaceuticals & Food Grade, IP BP USP FCC ACS Gr. of Chemicals mfd. by Anmol Chemicals |
|||
| Sodium Citrate | Titanium Dioxide | ||
| Zinc Carbonate | |||
|
|
|||
Global or International Potassium Acetate Suppliers, Exporters, Importers, Manufacturers
Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc.
----------------
If you want your work to be done well, then go to a busy man.
The other one has no time.