Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance & Flavor chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-22000:2005; Kosher Certified; Halal Certified; HACCP FSSAI. We offer Commercial Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
Bookmark this Web Site Email This Page Info to a Colleague or Yourself
Search our website here
Sodium Iodide BP USP IP Pure AR LR ACS Analytical Reagent Manufacturers
Sodium Iodide CAS Number 7681-82-5(anhydrous); 13517-06-1(dihydrate), EINECS EC Number 231-679-3, HS Code 28276000**; Molecular Weight 149.89 , Molecular Formula: NaI
For MSDS Sheet Click
MSDS Sheet of Sodium Iodide Manufacturers
Sodium iodide is a white, crystalline salt with the chemical formula NaI
Synonyms: Sodium Monoiodide; Sodium Iodine; Sodium Iodide, Hydrous; NaI; Sodium Iodin; Sodium Iodide Dihydrate; Sodium Iodide 2 H2O; Sodium Iodide Dihydrate
Sodium Iodide USP
NaI -- 149.89 -- [7681-82-5].
Sodium Iodide contains not less than 99.0 percent and not more than 101.5 percent of NaI, calculated on the anhydrous basis.
Identification— A solution (1 in 20) responds to the tests for Sodium and for Iodide.
Alkalinity— Dissolve 1.0 g in 10 mL of water, and add 0.15 mL of 0.10 N sulfuric acid: no red color is produced by the addition of 1 drop of phenolphthalein TS.
Water: not more than 2.0%.
Iodate— It meets the requirements of the test for Iodate under Potassium Iodide, 100 mg of Sodium Iodide being used in the control.
Thiosulfate and barium— It meets the requirements of the test for Thiosulfate and barium under Potassium Iodide.
Potassium— A solution of 1.0 g in 2 mL of water yields no precipitate with 1.0 mL of sodium bitartrate TS.
Heavy metals— Dissolve 2.0 g in 25 mL of water: the limit is 0.001%.
Limit of nitrate, nitrite, and ammonia— Add 5 mL of 1 N sodium hydroxide and about 200 mg of aluminum wire to a solution of 1.0 g of Sodium Iodide in 5 mL of water, contained in a test tube of about 40-mL capacity. Insert a pledget of purified cotton in the upper portion of the test tube, and place a piece of moistened red litmus paper over the mouth of the tube. Heat in a steam bath for 15 minutes: no blue coloration of the paper is discernible.
Assay— Weigh accurately about 500 mg of Sodium Iodide, and dissolve in about 10 mL of water. Add 35 mL of hydrochloric acid, and titrate with 0.05 M potassium iodate VS until the dark brown solution which is produced becomes pale brown. Add 1 mL of amaranth TS, and continue the titration slowly until the red color just changes to yellow. Each mL of 0.05 M potassium iodate is equivalent to 14.99 mg of NaI.
Sodium Iodide BP (Ph Eur monograph 0196)
NaI -- 149.9 -- 7681-82-5
99.0 per cent to 100.5 per cent (dried substance).
Appearance: White or almost white, crystalline powder or colourless crystals, hygroscopic.
Solubility: Very soluble in water, freely soluble in ethanol (96 per cent).
A. Solution S (see Tests) gives the reactions of iodides.
B. Solution S gives the reactions of sodium.
Solution S: Dissolve 10.0 g in carbon dioxide-free water R prepared from distilled water R and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear (2.2.1) and colourless.
Alkalinity: To 12.5 ml of solution S add 0.1 ml of bromothymol blue solution R1. Not more than 0.7 ml of 0.01 M hydrochloric acid is required to change the colour of the indicator.
Iodates: To 10 ml of solution S add 0.25 ml of iodide-free starch solution R and 0.2 ml of dilute sulphuric acid R and allow to stand protected from light for 2 min. No blue colour develops.
Sulphates: Maximum 150 ppm.
Thiosulphates: To 10 ml of solution S add 0.1 ml of starch solution R and 0.1 ml of 0.005 M iodine. A blue colour is produced.
Iron: Maximum 20 ppm.
Dilute 5 ml of solution S to 10 ml with water R.
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 3.0 per cent, determined on 1.00 g by drying in an oven at 105 °C for 3 h.
Dissolve 1.300 g in water R and dilute to 100.0 ml with the same solvent. To 20.0 ml of the solution add 40 ml of hydrochloric acid R and titrate with 0.05 M potassium iodate until the colour changes from red to yellow. Add 5 ml of chloroform R and continue the titration, shaking vigorously, until the chloroform layer is decolorised. 1 ml of 0.05 M potassium iodate is equivalent to 14.99 mg of NaI.
Sodium Iodide ACS AR Analytical Reagent Grade Chemical
Formula Wt 149.89
CAS Number 7681-82-5
Assay: Minimum 99.5% NaI
pH of a 5% solution: 6.0-9.0 at 25C
Insoluble matter: 0.01%
Chloride and bromide (as Cl): 0.01%
Iodate (IO3): 3 ppm
Nitrogen compounds (as N): 0.002%
Phosphate (PO4): 0.001%
Sulfate (SO4): 0.005%
Barium (Ba): 0.002%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.002%
Magnesium (Mg): 0.001%
Potassium (K): 0.01%
For Original Monographs of IP Indian Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 91-22-23774610
Current Date Time in India GMT+5:30 hours
USA & Canadian Customers may
Call toll-free 1-844-682-9243 (1-844-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last 23 March, 2017
List of All the IP BP USP FCC ACS Grades of Chemicals Best Seller Fast Moving IP BP USP FCC ACS Grades of Chemicals Ex-stock Items Ammonium Bicarbonate Ammonium Bromide Ammonium Carbonate Ammonium Chloride Ammonium Molybdate Ammonium Sulfate Aluminum Chloride Benzyl Alcohol Borax; Sodium Borate Boric Acid Calcium Acetate Calcium Chloride Calcium Gluconate Calcium Hydroxide Calcium Lactate Calcium Oxide Calcium Saccharate Calcium Sulfate Chromic Chloride Citric Acid Calcium Citrate Copper Gluconate Copper Sulfate, Cupric Sulphate Cupric Chloride Ferrous Fumarate Ferrous Gluconate Fumaric Acid Ferrous Sulphate Ferric Sulfate Ferric Ammonium Citrate Ferric Chloride Gentian Violet Mannitol Magnesium Chloride Magnesium Gluconate Magnesium Lactate Dihydrate Magnesium Sulfate Magnesium Trisilicate Maleic Acid Malic Acid BP USP Manganese Gluconate Manganese Sulfate Manganese Chloride Methylene Blue Potassium Bromide Potassium Chloride Potassium Gluconate Potassium Bitartrate, Cream of Tartar Potassium Hydroxide Potassium Iodide Potassium Iodate Potassium Sorbate Sodium Acetate Sodium Bicarbonate Sodium Butyrate Sodium Caprylate Sodium Fluoride Sodium Gluconate Sodium Hydroxide Pellets Sodium Iodide Sodium Lactate Sodium Perborate Sodium Propionate Sodium Thiosulfate Sodium Sulfate Stannous Chloride Dihydrate Zinc Carbonate Zinc Chloride Zinc Gluconate All Product List Aromatic; Flavors & Fragrances Shale Gas Hydraulic Fracturing Chemicals All Chemicals Also Offered in Small Packs
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again