Trimellitic anhydride or TMA or Benzene-1,2,4-tricarboxylic anhydride Manufacturers, with SDS GHS MSDS Sheet

Supplier, Manufacturer, Exporter of Trimellitic anhydride or Benzene-1,2,4-tricarboxylic anhydride, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc.

The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer.

The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals
ISO9001 ISO IEC 17025 ISO14001 ISO 45001 ISO 22000 HACCP FSSC22000 HACCP GMP Good Laboratory fssai HACCP halal jkkosher allergen free Gluten Free Reach

Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself

Search our website here:

Home --------- Contact

Chemical Products

Export to USA UAE Europe Africa Tanzania Kenya Egypt Turkey Jumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc. Packing Palletized and Shrink Wrapped; 25kg or 50kg or 55 lbs HDPE laminated bags with an extra HMHDP liner Drum Packing for better transportation Drum Packing & Palletized Liquid Chemical Export Import Air Freighting

Trimellitic anhydride or TMA or Benzene-1,2,4-tricarboxylic anhydride or Tri mellitic anhydride: CAS Number: 552-30-7 or 528-44-9, EINECS EC Number: 209-008-0, Molecular Formula: C9H4O5, Molecular Weight: 192.13, HS Code ---**

How big is your requirement or how small
We serve it all.

Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for Trimellitic anhydride or TMA or Benzene-1,2,4-tricarboxylic anhydride or Tri mellitic anhydride.

For SDS MSDS Sheet Click
SDS MSDS Sheet of Trimellitic anhydride or TMA or Benzene-1,2,4-tricarboxylic anhydride or Tri mellitic anhydride Manufacturers

Trimellitic anhydride
TMA or Benzene-1,2,4-tricarboxylic anhydride or Tri mellitic anhydride Pure Suppliers
Trimellitic anhydride

Trimellitic anhydride or TMA or Tri mellitic anhydride or Benzene-1,2,4-tricarboxylic anhydride is a trifunctional, highly reactive aromatic anhydride.  It is white, free-flowing flakes or powder or granules. Trimellitic anhydride is used in high solids, waterborne, powder, coil, and radiation cure compliant coatings in demanding applications for appliances, automotive OEM and refinishing, can coatings, coil coatings, industrial maintenance, metal furniture, wood furniture and kitchen cabinets, machinery and equipment, and architectural trim and exteriors. It is also used in fibers, high performance lubricants, epoxy curatives, dye intermediates, dental adhesives, and enteric coatings.

General Properties and Specification of Trimellitic anhydride or TMA or Benzene-1,2,4-tricarboxylic anhydride or Tri mellitic anhydride:
Appearance: Free-flowing flakes or powder or granules. Hygroscopic.
Odor: Odorless.
Assay: 98.5%
Phthalic Acid Content: 0.1% maximum.
Melting point: 164C literature.
Flash point: 227C literature.
Boiling point: 390C literature.
Solubility: Soluble in water, ethanol, and acetone.

We also manufacture and supply as under:

Maleic Anhydride

Isatoic Anhydride

Benzeneseleninic Anhydride

Phthalic Anhydride

2 Sulfobenzoic Anhydride

Trimellitic Anhydride

Trioctyl Trimellitate.

Manufacturers:

MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30

e-mail: info@mubychem.com

USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)

Manufacturers india
Copyright and Usual Disclaimer is Applicable.
Last 5 October, 2023

List of All the IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals
Best Seller Fast Moving IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals Ex-stock Items
Aluminum Chloride Hexahydrate Aluminium Potassium Sulphate
Ammonium Bicarbonate Ammonium Carbonate
Ammonium Chloride Ammonium Persulfate
Borax; Sodium Borate Boric Acid
Calcium Chloride Calcium Saccharate
Calcium Sulfate Carbamide Peroxide
Chromic Chloride Cupric or Copper Chloride
Ferric Chloride Hexahydrate Fumaric Acid
Glacial Acetic Acid Lactobionic Acid
Magnesium Chloride Magnesium Sulfate
Manganese Chloride Manganese Sulfate
Potassium Bromide Potassium Chloride
Potassium Hydroxide Pellets Potassium Nitrate
Propylene Carbonate Potassium Monopersulfate
Selenious acid Sodium Acetate
Sodium Bromate Sodium Diacetate
Sodium Formaldehyde Bisulfite Sodium Lactobionate
Sodium Tartrate Sodium Thiosulfate
Taurine Zinc Chloride

Exporter & Importer By Air Exports Exporters & Improters Trimellitic anhydride manufacturers

Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.

Global or International Suppliers, Exporters, Importers, Manufacturers

I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again

Trimellitic anhydride or TMA or Benzene-1,2,4-tricarboxylic anhydride or Tri mellitic anhydride SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
26-Mar-21

1. Product Identification

Product Name & Other Names: 1 Trimellitic anhydride or TMA or Benzene-1,2,4-tricarboxylic anhydride or Tri mellitic anhydride.
CAS No.:
552-30-7 or 528-44-9
EINECS EC Number: 209-008-0
Molecular Formula: C9H4O5
Molecular Weight: 192.13
Relevant uses and uses advised against (if any): Oil & Gas Wells fracturing and Industrial Manufacturing.
Suppliers: As per letterhead.

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Skin sensitization (Category 1), H317
Serious eye damage (Category 1), H318
Respiratory sensitization (Category 1), H334
Specific target organ toxicity - single exposure (Category 3), Respiratory system, H335

Labeling according to GHS USA & Regulation (EC) No 1272/2008

GHS Label Elements
Health Hazard
Health Hazard

GHS Label Elements
Corrosive
Corrosive

Signal Words: Danger

Hazard statements:
H317: May cause an allergic skin reaction.
H318: Causes serious eye damage.
H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H335: May cause respiratory irritation.

Precautionary statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264 Wash thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P272: Contaminated work clothing should not be allowed out of the workplace.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P285: In case of inadequate ventilation wear respiratory protection.
P314: Get medical advice/attention if you feel unwell.
P301+P312: IF SWALLOWED: Call a POISON CENTER or doctor/ physician if you feel unwell.
P302+P352: IF ON SKIN: Wash with plenty of soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332 + P313: If skin irritation occurs: Get medical advice/attention.
P337+P313: If eye irritation persists: Get medical advice / attention.
P501: Dispose of contents/container in accordance with local/regional/national/international regulation.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbols:
Xn Harmful
C Corrosive
Risk Phrases:
R34 Causes burns.
R37 Irritating to respiratory system.
R41 Risk of serious damage to eyes.
R42 May cause sensitization by inhalation.
R43 May cause sensitization by skin contact.

3. Composition/Information on Ingredients

Product Name & Other Names: 1 Trimellitic anhydride or TMA or Benzene-1,2,4-tricarboxylic anhydride or Tri mellitic anhydride.
CAS No.:
552-30-7 or 528-44-9
EINECS EC Number: 209-008-0

4. First Aid Measures

Always seek medical attention after first aid measures are provided.

Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen and get medical attention immediately.
Ingestion: Do not induce vomiting unless as directed by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention. Wash clothing and shoes before reuse.
Eye Contact:
Remove contact lenses. Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Notes to Physician: Treat symptomatically and supportively.

5. Fire Fighting Measures

Fire: As with most organic solids, fire is possible at elevated temperatures or by contact with an ignition source.
Flash Points: 227C literature.
Explosion: Fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion hazard.
Fire Extinguishing Media: Water spray, dry chemical, alcohol foam, fog or carbon dioxide.
Products of Combustion: These products are fumes and carbon oxides (CO, CO2).
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.

6. Accidental Release Measures

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage:
Small Spill: Use appropriate tools to put the spilled solid in a waste disposal container.
Large Spill: Corrosive solid. Do not inhale dust, vapors, mist, or gas. Avoid dust formation. Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water and allow to evacuate as per law.

7. Handling and Storage
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, strong acids, strong bases. Control ignition sources. Employ grounding, venting and explosion relief provisions in accord with accepted engineering practices in any process capable of generating dust.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits:
OSHA (USA): (Vacated) TWA: 0.005 ppm.
ACGIH: TWA: 0.0005 mg/m3; STEL: 0.002 mg/m3 Skin.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g., lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron, or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice.

9. Physical and Chemical Properties

Appearance: Free-flowing flakes or powder or granules. Hygroscopic.
Odor: Odorless.
Odor threshold: Not available.
pH: Not available.
Relative density: Not available.
Boiling Point: 390C literature.
Melting Point: 164C literature.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: 5.7
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Soluble in water, ethanol, and acetone.
Viscosity: Not available.
Molecular Formula: C9H4O5
Molecular Weight: 192.13

10. Stability and Reactivity

Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Fumes with Carbon dioxide and carbon monoxide.
Hazardous Polymerization: Will not occur.
Incompatibilities: Heat, strong oxidizers, strong acids, strong bases.
Conditions to Avoid: Heat, dusting and incompatibles.

11. Toxicological Information

Oral, mouse: LD50 = 1900 mg/kg;
Inhalation rat LC50 > 2.33 mg/L 4 h.
Oral, rat: LD50 = 2030 mg/kg.
Dermal, rabbit: LD50 = >200 gm/kg.
Epidemiology: No information available.
Teratogenicity: No information available.
Mutagenicity: No information available.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible, or confirmed human carcinogen by IARC.

12. Ecological Information

Toxicity: No data available
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused material in accordance with legal requirements.

14. Transport Information

DOT USA, TDG Canada & ADR/RID Europe: Not regulated.
IMDG/IMO & IATA/ICAO: Not regulated.

15. Regulatory Information

USA:
California No Significant Risk Level
: None of the chemicals in this product are listed.

Section 16 - Additional Information

European Labeling in Accordance with EC Directives:
H317: May cause an allergic skin reaction.
H318: Causes serious eye damage.
H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H335: May cause respiratory irritation.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbols:
Xn Harmful
C Corrosive
Risk Phrases:
R34 Causes burns.
R37 Irritating to skin.
R41 Risk of serious damage to eyes.
R42 May cause sensitization by inhalation.
R43 May cause sensitization by skin contact.

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************