|
|
Mubychem Group, established in 1976, is the pioneer manufacturer of Zinc Chloride, Ammonium Chloride, Calcium Chloride, Potassium Chloride, Sodium Acetate, Sodium Thiosulphate, Sodium Hydroxymethanesulfonate, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India. |
|
--------
--------
Sodium Formaldehyde Bisulfite Manufacturers Sodium Hydroxymethanesulfonate Manufacturers; MSDS
For Buying Sodium Formaldehyde Bisulfite
Sodium Formaldehyde Bisulfite
Manufacturers; Sodium Hydroxymethanesulfonate Manufacturers
Sodium Formaldehyde Bisulfite
Sodium Hydroxymethanesulfonate Crystals
Sodium Formaldehyde Bisulfite MSDS Sheet, Sodium Hydroxymethanesulfonate Material Safety Data Sheet
Section 1 - Chemical Product Identification
Name: Formaldehyde Sodium Bisulfite.Synonym: Formaldehyde sodium bisulfite; Formbis; Monosodium hydroxymethanesulfonate; Sodium hydroxymethanesulfonate; Sodium hydroxymethylsulfonate
Section 2 - Composition, Information on Ingredients
Chemical Name: Formaldehyde Sodium Bisulfite or Sodium Formaldehyde Bisulfite Sodium HydroxymethanesulfonateCAS #: 870-72-4
Percent: 95
Section 3 - Hazards Identification
EMERGENCY OVERVIEW
Caution! Sodium
Formaldehyde Bisulfite or Sodium Hydroxymethane Sulfonate may cause
eye, skin, and respiratory tract irritation. Hygroscopic (absorbs
moisture from the air). The toxicological properties of this
material have not been fully investigated.
Slightly hazardous in case of skin contact (irritant), of eye
contact (irritant), of ingestion, of inhalation.
Target Organs: None known.
Potential Health
Effects
Eye:
Sodium Formaldehyde Bisulfite or Sodium Hydroxymethanesulfonate may
cause eye irritation.
Skin: May
cause skin irritation. May be harmful if absorbed through the skin.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed.
Inhalation:
May cause respiratory tract irritation. May be harmful if inhaled.
Section 4 - First
Aid Measures
Skin: Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops. Cold water may be used.
Ingestion: Do not induce vomiting. Get medical aid if irritation or symptoms occur.
Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician: Treat symptomatically and supportively.
Section 5 - Fire Fighting Measures
General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam.
Flash Point: 184 deg C ( 363.20 deg F)
Auto ignition Temperature: 500 deg C ( 932.00 deg F)
Section 6 - Accidental Release Measures
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according law.Large Spill: Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.
Section 7 - Handling and Storage
Handling: Use Sodium Formaldehyde Bisulfite or Sodium Hydroxymethanesulfonate with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation.Storage: Store in a cool, dry place. Store in a tightly closed container.
Section 8 - Exposure Controls, Personal Protection
Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.Exposure Limits: Formaldehyde Sodium Bisulfite or Sodium Hydroxymethane Sulfonate or Sodium Formaldehyde Bisulfite is not listed by ACGIH, NIOSH, OSHA - Final PELs
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.
Section 9 - Physical and Chemical Properties
Physical State: Sodium Formaldehyde Bisulfite or Sodium Hydroxymethane Sulfonate is solid.Appearance: white
Odor: None reported.
pH: 7 - 8 (100g/L aq sol)
Freezing/Melting Point: 200 deg C (decom)
Decomposition Temperature: 200 deg C
Solubility: 800 g/L (20C)
Molecular Formula: CH3NaO4S
Molecular Weight: 134.08
Section 10 - Stability and Reactivity
Chemical Stability: Hygroscopic; absorbs moisture or water from the air.Conditions to Avoid: Incompatible materials, dust generation, exposure to moist air or water.
Incompatibilities with Other Materials: Strong oxidizing agents.
Hazardous Decomposition Products: Carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported.
Section 11 - Toxicological Information
RTECS#:CAS# 870-72-4: PB2200000
LD50/LC50:
CAS# 870-72-4:
Oral, rat: LD50 = 3200
Carcinogenicity:
CAS# 870-72-4: Not listed by ACGIH, IARC, NTP, or CA Prop 65.
Section 12 - Ecological Information
Ecotoxicity: No data available. No information available.Environmental: No information available.
Section 13 - Disposal Considerations
Chemical waste generators must determine whether a discarded
chemical is classified as a hazardous waste. US EPA guidelines for
the classification determination are listed in 40 CFR Parts 261.3.
RCRA P-Series: None listed.
RCRA U-Series: None listed.
Section 14 - Transport Information
Transport is not regulated.
Section 15 - Regulatory Information
TSCACAS# 870-72-4 is listed on the TSCA inventory.
Health & Safety Reporting List
None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
None of the chemicals in this product are under a Chemical Test Rule.
Section 12b
None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule
None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs
None of the chemicals in this material have an RQ.
SARA Section 302 Extremely Hazardous Substances
None of the chemicals in this product have a TPQ.
Section 313: No chemicals are reportable under Section 313.
Clean Air Act:
This material does not contain any hazardous air pollutants.
This material does not contain any Class 1 Ozone depletors.
This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
None of the chemicals in this product are listed as Hazardous Substances under the CWA.
None of the chemicals in this product are listed as Priority Pollutants under the CWA.
None of the chemicals in this product are listed as Toxic Pollutants under the CWA.
OSHA:
None of the chemicals in this product are considered highly hazardous by OSHA.
STATE
CAS# 870-72-4 is not present on state lists from CA, PA, MN, MA, FL, or NJ.
California Prop 65
California No Significant Risk Level: None of the chemicals in this product are listed.
European Labeling in Accordance with EC Directives.
Hazard Symbols:
Not available.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 870-72-4: 1
Canada - DSL/NDSL
CAS# 870-72-4 is listed on Canada's DSL List.
Canada - WHMIS
This product has a WHMIS classification of D2B.
Section 16 - Additional Information
Disclaimer:************************************************************************************************************
Our company provides this Sodium Formaldehyde Bisulfite or Sodium Hydroxymethane Sulfonate MSDS information contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Sodium Formaldehyde Bisulfite or Sodium Hydroxymethane Sulfonate MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
************************************************************************************************************
Sodium hydroxymethanesulfonate manufacturers;
Sodium formaldehyde bisulfite manufacturers at:
MUBY
CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI
400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610,
23723564. FAX: 91-22-23728264
e-mail:
info@mubychem.com
Cell Call
to Anmol: +91-9821870100
USA & Canadian Customers may Call
773-829-5811
Copyright and Usual Disclaimer is
Applicable.
Last updated
15 December, 2011
----------------
| Old Spice: Manufacturing since more than Three Decades: | |||
|
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals |
|||
| Borax; Sodium Borate | |||
| Calcium Chloride | |||
| Chromic Chloride | |||
| Manganese Chloride | Manganese Sulfate | Methylene Blue | Potassium Chloride |
| Sodium Acetate | Sodium Hydroxide | Sodium Thiosulfate | |
| Zinc Chloride | |||
|
Pharmaceuticals & Food Grade, IP BP USP FCC ACS Gr. of Chemicals mfd. by Anmol Chemicals |
|||
| Sodium Citrate | Titanium Dioxide | ||
| Zinc Carbonate | |||
|
|
|||
Global or International Sodium Formaldehyde Bisulfite or Sodium Hydroxymethanesulfonate Suppliers, Exporters, Importers, Manufacturers
Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc.
----------------