(3-Aminopropyl)Triethoxysilane or APTES or 3-(Triethoxysilyl)Propylamine or 3-(Triethoxysilyl)propan-1-amine Manufacturers, with SDS GHS MSDS Sheet

Supplier, Manufacturer, Exporter of (3-Aminopropyl)Triethoxysilane or APTES or 3-(Triethoxysilyl)Propylamine or 3-(Triethoxysilyl)propan-1-amine, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc.

The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer.

The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals
ISO9001 ISO IEC 17025 ISO14001 ISO 45001 ISO 22000 HACCP FSSC22000 HACCP GMP Good Laboratory fssai HACCP halal jkkosher allergen free Gluten Free Reach

Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself

Search our website here:

Home --------- Contact

Chemical Products

Export to USA UAE Europe Africa Tanzania Kenya Egypt Turkey Jumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc. Packing Palletized and Shrink Wrapped; 25kg or 50kg or 55 lbs HDPE laminated bags with an extra HMHDP liner Drum Packing for better transportation Drum Packing & Palletized Liquid Chemical Export Import Air Freighting

(3-Aminopropyl)Triethoxysilane or APTES or 3-(Triethoxysilyl)Propylamine or 3-(Triethoxysilyl)propan-1-amine CAS Number 919-30-2, EINECS EC Number: 213-048-4, Molecular Formula: C9H23NO3Si, Molecular Weight: 221.37, HS Code 29319090

How big is your requirement or how small
We serve it all.

Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for (3-Aminopropyl)Triethoxysilane or APTES or 3-(Triethoxysilyl)Propylamine or 3-(Triethoxysilyl)propan-1-amine.

For SDS MSDS Sheet Click
SDS MSDS Sheet of (3-Aminopropyl)Triethoxysilane or APTES or 3-(Triethoxysilyl)Propylamine or 3-(Triethoxysilyl)propan-1-amine Manufacturers

(3-Aminopropyl)Triethoxysilane
APTES or 3-(Triethoxysilyl)Propylamine or 3-(Triethoxysilyl)propan-1-amine Suppliers
(3-Aminopropyl)Triethoxysilane

(3-Aminopropyl)Triethoxysilane or APTES or (3-(Triethoxysilyl)Propylamine) or 3-(Triethoxysilyl)propan-1-amine frequently used in the process of silanization. It is used for chemically modifying various surfaces, including alumina and silica.

General Properties and Specifications of (3-Aminopropyl)Triethoxysilane or APTES or (3-(Triethoxysilyl)Propylamine) or 3-(Triethoxysilyl)propan-1-amine:
Appearance: Clear colourless liquid.
Assay: 99%
Relative Density: about 0.948-0.951 @ 20C.
Refractive Index: 1.420-1.422 @ 20C.
Melting Point: -70C.
Boiling Point: 217C.
Flash Point: 98C.
Storage: Room Temperature.

We also manufacture and supply as under:

(3-Aminopropyl)Triethoxysilane

Polyaminopropyl Biguanide

Dimethylaminopropylamine

N-(3-Dimethylaminopropyl)-N′-ethylcarbodiimide

N-(3-Dimethylaminopropyl)-N′-ethylcarbodiimide hydrochloride

1-Bromo-3-Methoxypropane

N-Carbethoxy-4-Piperidone

2,2-Dimethoxypropane

Trimethylchlorosilane

Tetraethyl Orthosilicate or Tetraethoxysilane.

Manufacturers:

MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30

e-mail: info@mubychem.com

USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)

Manufacturers india
Copyright and Usual Disclaimer is Applicable.
Last 23 October, 2023

List of All the IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals
Best Seller Fast Moving IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals Ex-stock Items
Aluminum Chloride Hexahydrate Aluminium Potassium Sulphate
Ammonium Bicarbonate Ammonium Carbonate
Ammonium Chloride Ammonium Persulfate
Borax; Sodium Borate Boric Acid
Calcium Chloride Calcium Saccharate
Calcium Sulfate Carbamide Peroxide
Chromic Chloride Cupric or Copper Chloride
Ferric Chloride Hexahydrate Fumaric Acid
Glacial Acetic Acid Lactobionic Acid
Magnesium Chloride Magnesium Sulfate
Manganese Chloride Manganese Sulfate
Potassium Bromide Potassium Chloride
Potassium Hydroxide Pellets Potassium Nitrate
Propylene Carbonate Potassium Monopersulfate
Selenious acid Sodium Acetate
Sodium Bromate Sodium Diacetate
Sodium Formaldehyde Bisulfite Sodium Lactobionate
Sodium Thiosulfate Zinc Chloride

Exporter & Importer By Air Exports Exporters & Improters (3-Aminopropyl)Triethoxysilane Manufacturers

Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.

Global or International Suppliers, Exporters, Importers, Manufacturers

I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again

(3-Aminopropyl)Triethoxysilane or APTES or 3-(Triethoxysilyl)Propylamine or 3-(Triethoxysilyl)propan-1-amine SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
21-Oct-23

1. Product Identification

Product Name & Other Names: (3-Aminopropyl)Triethoxysilane or APTES or 3-(Triethoxysilyl)Propylamine or 3-(Triethoxysilyl)propan-1-amine.
CAS No.: 919-30-2
EINECS EC Number: 213-048-4
Molecular Formula: C9H23NO3Si
Molecular Weight: 221.37
Relevant uses and uses advised against (if any): Laboratory and Industrial Use.
Supplier: As per letterhead.

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Acute toxicity, oral (Category 4) H302
Skin corrosion (Category 1B), H314
Skin sensitization (Category 1), H317

Labeling according to GHS USA & Regulation (EC) No 1272/2008

GHS Label Elements
corrosive.png
Corrosive

Signal Words: Danger

Hazard Statements:
H302: Harmful if swallowed.
H314: Causes severe skin burns and eye damage.
H317: May cause an allergic skin reaction.

Precautionary Statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash contaminated parts thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P301+P310: IF SWALLOWED: Immediately call a POSION CENTER or doctor/physician.
P302+352: IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333+313: If skin irritation or a rash occurs: Get medical advice/attention.
P403+233+235: Store in a well-ventilated place. Keep container tightly closed. Keep cool.
P391: Collect spillage.
P405: Store locked up.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbol:
Xn Harmful.
C Corrosive.
Risk Phrase:
R22 Harmful if swallowed.
R34 Causes burns.
R41 Risk of serious damage to the eyes.

3. Composition/Information on Ingredients

Product Name & Other Names: (3-Aminopropyl)Triethoxysilane or APTES or 3-(Triethoxysilyl)Propylamine or 3-(Triethoxysilyl)propan-1-amine.
CAS No.: 919-30-2
EINECS EC Number: 213-048-4

4. First Aid Measures

Always seek medical attention after first aid measures are provided.

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Do not use mouth-to-mouth method if victim inhaled the substance. Induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Get medical attention.
Ingestion: Rinse mouth. Do not induce vomiting without medical advice. If vomiting occurs naturally, have victim lean forward to reduce the risk of aspiration. Never give anything by mouth to a victim who is unconscious or is having convulsions. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Use a mild soap if available. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse. For minor skin contact, avoid spreading material on unaffected skin.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.

5. Fire Fighting Measures

Products of Combustion: Carbon oxides, nitrogen oxides, silicon oxide and fumes.
Fire Extinguishing Media: Water spray. Alcohol foam. Polymer foam. Dry chemical powder. Carbon dioxide (CO2). Avoid a solid water stream as it may scatter and spread fire. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. In the event of fire and/or explosion do not breathe fumes.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.

6. Accidental Release Measures

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep up and remove to an approved disposal container.

7. Handling and Storage

Precautions for safe handling: Do not handle or store near an open flame, heat, or other sources of ignition. All equipment used when handling the product must be grounded. Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents and acids. Storage: Room Temperature.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

9. Physical and Chemical Properties

Appearance: Clear colourless liquid.
Odor: Amine-like.
Odor threshold: Not available.
pH: Not available.
Relative density: about 0.948-0.951 @ 20C.
Melting point/freezing point: -70C.
Initial boiling point and boiling range: 217C.
Flash point: 98C.
Auto-ignition temperature: 270C.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility(ies): Not available.
Viscosity: Not available.
Molecular Formula: C9H23NO3Si
Molecular Weight: 221.37

10. Stability and Reactivity

Stability: It is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: It emits carbon oxides, nitrogen oxides, silicon oxide toxic fumes when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Oxidizing agents, Acids.
Conditions to Avoid: Avoid light, heat, sparks, open flames, and other ignition sources. Contact with incompatible materials.

11. Toxicological Information

Toxicity data:
LD50 Oral - Rat - male - 1780 mg/kg
LC50 Inhalation - Rat - 6 h - > 5 ppm – vapor.
LD50 Dermal - Rabbit - 4290 mg/kg
Carcinogenicity: Not expected to be hazardous by IARC, OSHA, ACGIH and NTP criteria.
Mutagenic Effects: No information available
Reproductive Effects: No information available.
Developmental Effects: No information available.
Teratogenicity: No information available.

12. Ecological Information

Toxicity to fish: semi-static test LC50 - Danio rerio (zebra fish) - > 934 mg/l - 96 h.
Toxicity to daphnia and other aquatic invertebrates: static test EC50 - Daphnia magna (Water flea) - 331 mg/l - 48 h
Environmental effects: Harmful to aquatic life.
Persistence and degradability: No data available
Mobility in soil: No data available
Results of PBT and vPvB assessment: Not available.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of containers and unused contents in accordance with federal, state, and local requirements.

14. Transport Information

DOT USA, TDG Canada & ADR/RID Europe:
UN-No UN 2735
Proper Shipping Name: Amines, liquid, corrosive, n.o.s. (Triethoxy(3-aminopropyl)silane).
Hazard Class 8
Packing Group II.
IMDG/IMO:
UN-No UN 2735
Proper Shipping Name: Amines, liquid, corrosive, n.o.s. (Triethoxy(3-aminopropyl)silane).
Hazard Class 8
Packing Group II.
IATA:
UN-No UN 2735
Proper Shipping Name: Amines, liquid, corrosive, n.o.s. (Triethoxy(3-aminopropyl)silane).
Hazard Class 8
Packing Group II.

15. Regulatory Information

USA:
SARA 311/312 Hazards
: Acute Health Hazard; Chronic Health Hazard. See section 2.
California Prop. 65 Components: This product does not contain any chemicals known to the State of California to cause cancer, birth defects, or any other reproductive harm.

Section 16 - Additional Information

European Labeling in Accordance with EC Directives:
H302: Harmful if swallowed.
H314: Causes severe skin burns and eye damage.
H317: May cause an allergic skin reaction.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbol:
Xn Harmful.
C Corrosive.
Risk Phrase:
R22 Harmful if swallowed.
R34 Causes burns.
R41 Risk of serious damage to the eyes.

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************