p-Dimethylaminobenzaldehyde or 4-Dimethylaminobenzaldehyde or para-Dimethylaminobenzaldehyde or 4-Formyl-N,N-dimethylaniline or Ehrlich's Reagent Manufacturers, with SDS GHS MSDS Sheet

Supplier, Manufacturer, Exporter of p-Dimethylaminobenzaldehyde or 4-Dimethylaminobenzaldehyde or para-Dimethylaminobenzaldehyde or 4-Formyl-N,N-dimethylaniline or Ehrlich's Reagent, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal, Bangladesh, etc.

The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer.

The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals
ISO9001 ISO IEC 17025 ISO14001 ISO 45001 ISO 22000 HACCP FSSC22000 HACCP GMP Good Laboratory fssai HACCP halal jkkosher allergen free Gluten Free Reach

Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself

Search our website here:

Home --------- Contact

Chemical Products

Export to USA UAE Europe Africa Tanzania Kenya Egypt Turkey Jumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc. Packing Palletized and Shrink Wrapped; 25kg or 50kg or 55 lbs HDPE laminated bags with an extra HMHDP liner Drum Packing for better transportation Drum Packing & Palletized Liquid Chemical Export Import Air Freighting

p-Dimethylaminobenzaldehyde or 4-Dimethylaminobenzaldehyde or para-Dimethylaminobenzaldehyde or 4-Formyl-N,N-dimethylaniline or Ehrlich's Reagent CAS Number 100-10-7, EINECS EC Number: 202-819-0, Molecular Formula: C9H11NO or 4-[(CH3)2N]C6H4CHO, Molecular Weight: 149.19, HS Code 29223900

How big is your requirement or how small
We serve it all.

Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for p-Dimethylaminobenzaldehyde or 4-Dimethylaminobenzaldehyde or para-Dimethylaminobenzaldehyde or 4-Formyl-N,N-dimethylaniline or Ehrlich's Reagent.

For SDS MSDS Sheet Click
SDS MSDS Sheet of p-Dimethylaminobenzaldehyde or 4-Dimethylaminobenzaldehyde or para-Dimethylaminobenzaldehyde or 4-Formyl-N,N-dimethylaniline or Ehrlich's Reagent Manufacturers

p-Dimethylaminobenzaldehyde
4-Dimethylaminobenzaldehyde or para-Dimethylaminobenzaldehyde or 4-Formyl-N,N-dimethylaniline or Ehrlich's Reagent Suppliers
4-Dimethylaminobenzaldehyde or para-Dimethylaminobenzaldehyde

p-Dimethylaminobenzaldehyde or 4-Dimethylaminobenzaldehyde or para-Dimethylaminobenzaldehyde is an organic compound containing amine and aldehyde moieties which is used in Ehrlich's reagent and Kovac's reagent to test for indoles. It may also be used for determination of hydrazine.

General Properties and Specifications of p-Dimethylaminobenzaldehyde or 4-Dimethylaminobenzaldehyde or para-Dimethylaminobenzaldehyde or 4-Formyl-N,N-dimethylaniline or Ehrlich's Reagent:
Appearance: White to beige crystalline powder.
Assay: 99%
Sulfated ash: 0.05% maximum.
Loss on drying: 0.5% maximum.
Melting point: 74C literature.
Flash point: 164C.
Boiling point: 176C to 177C literature.
Auto-ignition temperature: 445C.
Relative density: 1.2
Solubility: Very slightly soluble in water.
Storage: Recommended storage at +15C to +25C.


4-(Dimethylamino)benzaldehyde Analytical Reagent Grade:
CH3)2NC6H4CHO Formula Weight 149.19
CAS Number 100-10-7

REQUIREMENTS
Melting point: 73C to 75C

MAXIMUM ALLOWABLE
Solubility in alcohol: Passes test
Color (APHA) of alcohol solution: 60
Solubility in hydrochloric acid: Passes test.
Color of hydrochloric acid solution: Passes test.
Residue after ignition: 0.1%

For Original Monographs of IP Indian Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.

We also manufacture and supply as under:

Benzaldehyde

Benzalkonium Chloride

4-Chlorobenzaldehyde

4-Dimethylaminobenzaldehyde

4-Dimethylaminopyridine

Dimethylaminopropylamine

Dimethyl Malonate

Dimethyl Phosphite

Dimethyl Sulfoxide DMSO

N'N-Dimethyl acetamide

Dimethylethanolamine

4-Hydroxybenzaldehyde

2-(4-Dimethylaminostyryl)-1-ethylquinolinium iodide

Methyl 2-Bromobenzoate.

Manufacturers:

MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30

e-mail: info@mubychem.com

USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)

Manufacturers india
Copyright and Usual Disclaimer is Applicable.
Last 12 June, 2024

List of All the IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals
Best Seller Fast Moving IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals Ex-stock Items
Aluminum Chloride Hexahydrate Aluminium Potassium Sulphate
Ammonium Bicarbonate Ammonium Carbonate
Ammonium Chloride Ammonium Persulfate
Borax; Sodium Borate Boric Acid
Calcium Chloride Calcium Saccharate
Calcium Sulfate Carbamide Peroxide
Chromic Chloride Cupric or Copper Chloride
Ferric Chloride Hexahydrate Fumaric Acid
Glacial Acetic Acid Lactobionic Acid
Magnesium Chloride Magnesium Sulfate
Manganese Chloride Manganese Sulfate
Potassium Bromide Potassium Chloride
Potassium Hydroxide Pellets Potassium Nitrate
Propylene Carbonate Potassium Monopersulfate
Selenious acid Sodium Acetate
Sodium Bromate Sodium Diacetate
Sodium Formaldehyde Bisulfite Sodium Lactobionate
Sodium Thiosulfate Zinc Chloride

Exporter & Importer By Air Exports Exporters & Improters 4-Dimethylaminobenzaldehyde or para-Dimethylaminobenzaldehyde Manufacturers

Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.

Global or International Suppliers, Exporters, Importers, Manufacturers

I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again

p-Dimethylaminobenzaldehyde or 4-Dimethylaminobenzaldehyde or para-Dimethylaminobenzaldehyde or 4-Formyl-N,N-dimethylaniline, or Ehrlich's Reagent SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
21-July-23

1. Product Identification

Product Name: p-Dimethylaminobenzaldehyde or 4-Dimethylaminobenzaldehyde or para-Dimethylaminobenzaldehyde or 4-Formyl-N,N-dimethylaniline or Ehrlich's Reagent.
CAS No.
: 100-10-7
EINECS: EC Number: 202-819-0
Molecular Weight: 149.19
Chemical Formula: C9H11NO or 4-[(CH3)2N]C6H4CHO
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.

2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Sensitization, Skin Category 1, H317

Labeling according to GHS & Regulation (EC) No 1272/2008

GHS Label Elements
Irritant
Irritant

Signal Words: Warning

Hazard statements:
H317: May cause an allergic skin reaction.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash skin thoroughly after handling.
P272: Contaminated work clothing should not be allowed out of the workplace.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P302+352: IF ON SKIN: Wash with soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P333+313: If skin irritation or a rash occurs: Get medical advice/attention.
P337+P313: If eye irritation persists: Get medical advice/ attention.
P360: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
P363: Wash contaminated clothing before reuse.
P501: Dispose of contents/container in accordance with local/regional/national/international regulations.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbol:
Xi = Irritant
Risk Phrases:
R43 = May cause sensitization by skin contact.

3. Composition/Information on Ingredients

Product Name: p-Dimethylaminobenzaldehyde or 4-Dimethylaminobenzaldehyde or para-Dimethylaminobenzaldehyde or 4-Formyl-N,N-dimethylaniline, or Ehrlich's Reagent.
CAS No.
: 100-10-7
EINECS: EC Number: 202-819-0

4. First Aid Measures

Always seek medical attention after first aid measures are provided.

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Note to Physician: Treat symptomatically.

5. Fire Fighting Measures

Flammability of the Product: The product is flammable.
Auto-Ignition Temperature: 445C.
Flash Points: 164C.
Products of Combustion: It forms oxides of carbon nitrogen and toxic gases when heated to decomposition. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas.
Explosion: Not known.
Fire Extinguishing Media
: Use water spray, dry chemical, foam, or carbon dioxide.
Special Information:
;In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and a suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.

6. Accidental Release Measures

Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage:
Small Spill: Avoid dust formation. Avoid breathing dust. Ensure adequate ventilation. Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.

7. Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents & alkalis. Protect against physical damage or contact with oxidizing material and combustible substances. Avoid moisture and store it away from water sources.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

9. Physical and Chemical Properties

Appearance: White to beige crystalline powder.
Odor: Strong.
Odor threshold: Not available.
pH: Not available.
Relative density: about 1.2
Melting Point: 74C literature.
Boiling range: 176C to 177C literature..
Flash point: 164C.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Very slightly soluble in water.
Viscosity: Not available.
Molecular Weight: 149.19
Chemical Formula: C9H11NO or 4-[(CH3)2N]C6H4CHO

10. Stability and Reactivity

Stability: Stable under recommended conditions of use and storage.
Hazardous Decomposition Products: It produces oxides of carbon nitrogen along with toxic fumes when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Incompatible with water including moisture, heat, oxidizing material, strong acids & alkalis.
Hazardous Decomposition Products: Nitrogen oxides (NOx), Carbon monoxide (CO), Carbon dioxide (CO2.
Conditions to Avoid: Moisture, Heat, light, Exposure to air, incompatibles.

11. Toxicological Information

Toxicity to Animals: Oral, rat: LD50 = > 2.000 mg/kg
Carcinogenic Effects: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible, or confirmed human carcinogen by IARC.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.

12. Ecological Information

Toxicity Data:
Toxicity to fish: LC50 - Pimephales promelas (fathead minnow) - 45,7 mg/l - 96 h.
Toxicity to daphnia and other aquatic invertebrates semi-static test EC50 - Daphnia magna (Water flea) - 1,58 mg/l - 48 h.
Persistence and Degradability: No information available.
Mobility: No information available.
Bioaccumulation/ Accumulation: No information available.
Results of PBT and vPvB assessment: No data available for assessment.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of containers and unused material in accordance with federal, state, and local requirements.

14. Transport Information

DOT USA, TDG Canada & ADR/RID Europe: Not Regulated.
IMDG/IMO: Not Regulated.
IATA/ICAO: Not Regulated.

15. Regulatory Information

USA:
SARA 311/312 Hazards
: See section 2.
California Prop 65: Not listed.

Section 16 - Additional Information

European Labeling in Accordance with EC Directives:
H317 = May cause an allergic skin reaction.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbol:
Xi = Irritant
Risk Phrases:
R43 = May cause sensitization by skin contact.

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************