Dibutyl Phthalate or DBP or n-Butyl Phthalate or Phthalic Acid Dibutyl Ester USP BP Ph Eur Grade Manufacturers, with SDS GHS MSDS Sheet

Supplier, Manufacturer, Exporter of Dibutyl Phthalate or DBP or n-Butyl Phthalate or Phthalic Acid Dibutyl Ester USP BP Ph Eur Grade, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc.

The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer.

The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals
ISO9001 ISO IEC 17025 ISO14001 ISO 45001 ISO 22000 HACCP FSSC22000 HACCP GMP Good Laboratory fssai HACCP halal jkkosher allergen free Gluten Free Reach

Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself

Search our website here:

Home --------- Contact

Chemical Products

Export to USA UAE Europe Africa Tanzania Kenya Egypt Turkey Jumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc. Packing Palletized and Shrink Wrapped; 25kg or 50kg or 55 lbs HDPE laminated bags with an extra HMHDP liner Drum Packing for better transportation Drum Packing & Palletized Liquid Chemical Export Import Air Freighting

Dibutyl Phthalate or DBP or n-Butyl Phthalate or Phthalic Acid Dibutyl Ester USP BP Ph Eur Grade CAS Number 84-74-2, EINECS EC Number: 201-557-4, Molecular Formula: C16H22O4, Molecular Weight: 278.35, HS Code 29173910

How big is your requirement or how small
We serve it all.

Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for Dibutyl Phthalate or DBP or n-Butyl Phthalate or Phthalic Acid Dibutyl Ester USP BP Ph Eur Grade.

For SDS MSDS Sheet Click
SDS MSDS Sheet of Dibutyl Phthalate or DBP or n-Butyl Phthalate or Phthalic Acid Dibutyl Ester USP BP Ph Eur Grade Manufacturers

Dibutyl Phthalate
DBP or n-Butyl Phthalate or Phthalic Acid Dibutyl Ester USP BP Ph Eur Grade Suppliers
Dibutyl Phthalate

Dibutyl Phthalate or DBP or n-Butyl Phthalate or Phthalic Acid Dibutyl Ester is a commonly used plasticizer in various polymer-based products and in pharmaceutical industries.

General Properties and Specifications of Dibutyl Phthalate or DBP or n-Butyl Phthalate or Phthalic Acid Dibutyl Ester:

Appearance: Clear colourless liquid.
Assay (GC): 98% minimum.
Relative density: @ 20C 1.044-1.046
Refractive Index (20C): 1.491-1.493
Relative density: 1.05
Melting point: -35C.
Boiling point: 340C.
Flash point: 157C.
Auto-ignition temperature: 402C.
Solubility: Very slightly soluble in water.


Dibutyl Phthalate USP Grade Specifications:
C16H22O4 --- 278.34
1,2-Benzenedicarboxylic acid, dibutyl ester, CAS 84-74-2
UNII: 2286E5R2KE

DEFINITION
Dibutyl Phthalate contains NLT 99.0% and NMT 101.0% of dibutyl phthalate (C16H22O4).

IDENTIFICATION
A. Infrared Absorption: On undried specimen
B. It meets the requirements in Specific Tests for Refractive Index.

Residue on Ignition: NMT 0.1%
Related Compounds: To pass the test.
Acidity: Meets the requirement.
Water Determination: NMT 0.2%
Appearance of solution: The Sample is clear and not more intensely colored than the Standard solution.

For Original Monographs of IP Indian Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.

We also manufacture and supply as under:

Butyl Paraben

Butyl Gallate

Cellulose Acetate Phthalate

Dibutylamine

Dibutyl Phthalate

Diethyl Phthalate

Diallyl Phthalate

Hydroxypropyl Methycellulose Phthalate

ortho-Phthalaldehyde or Phthaldialdehyde

Phthalic Acid

Terephthalic Acid.

Manufacturers:

MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30

e-mail: info@mubychem.com

USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)

Manufacturers india
Copyright and Usual Disclaimer is Applicable.
Last 22 November, 2023

List of All the IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals
Best Seller Fast Moving IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals Ex-stock Items
Aluminum Chloride Hexahydrate Aluminium Potassium Sulphate
Ammonium Bicarbonate Ammonium Carbonate
Ammonium Chloride Ammonium Persulfate
Borax; Sodium Borate Boric Acid
Calcium Chloride Calcium Saccharate
Calcium Sulfate Carbamide Peroxide
Chromic Chloride Cupric or Copper Chloride
Ferric Chloride Hexahydrate Fumaric Acid
Glacial Acetic Acid Lactobionic Acid
Magnesium Chloride Magnesium Sulfate
Manganese Chloride Manganese Sulfate
Potassium Bromide Potassium Chloride
Potassium Hydroxide Pellets Potassium Nitrate
Propylene Carbonate Potassium Monopersulfate
Selenious acid Sodium Acetate
Sodium Bromate Sodium Diacetate
Sodium Formaldehyde Bisulfite Sodium Lactobionate
Sodium Thiosulfate Zinc Chloride

Exporter & Importer By Air Exports Exporters & Improters Dibutyl Phthalate Manufacturers

Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.

Global or International Suppliers, Exporters, Importers, Manufacturers

I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again

Dibutyl Phthalate or DBP or n-Butyl Phthalate or Phthalic Acid Dibutyl Ester SDS GHS Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet
22-Sept-23

1. Product Identification

Product Name & Other Names: Dibutyl Phthalate or DBP or n-Butyl Phthalate or Phthalic Acid Dibutyl Ester.
CAS Number: 84-74-2
EINECS EC Number
: 201-557-4
Molecular Formula
: C16H22O4
Molecular Weight
: 278.35
Relevant uses and uses advised against (if any): Fracturing and Industrial Manufacturing Use.
Supplier: As per letterhead.

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Reproductive toxicity Category 1B - H360D
Hazardous to the aquatic environment, long-term hazard Category 1, H410

Labeling according to GHS & Regulation (EC) No 1272/2008

GHS Label Elements
Health Hazzard
Health Hazard

GHS Label Elements
Marine Pollutant
Marine Pollutant

Signal Words: Danger

Hazard Statements:
H360: May damage fertility or the unborn child.
H410: Very toxic to aquatic life with long lasting effects.

Precautionary Statements:
P201: Obtain special instructions before use.
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash contaminated parts thoroughly after handling.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P281: Use personal protective equipment as required.
P362: Take off contaminated clothing and wash before reuse.
P301+330+331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P302 + P352: IF ON SKIN: Wash with plenty of soap and water.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes.
P308 + P310: IF exposed or concerned: immediately call a POISON CENTER or doctor/ physician.
P405: Store locked up.
P501: Dispose of contents/container in accordance with local/national regulation.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbols:
Xn = Harmful.
N = Dangerous for the environment.
Risk Phrases:
R60 May impair fertility.
R61 May cause harm to the unborn child.
R50/53 - Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

3. Composition/Information on Ingredients

Product Name & Other Names: Dibutyl Phthalate or DBP or n-Butyl Phthalate or Phthalic Acid Dibutyl Ester.
CAS Number: 84-74-2
EINECS EC Number
: 201-557-4

4. First Aid Measures

Always seek medical attention after first aid measures are provided.

Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention. Wash clothing and shoes before reuse.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush your eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention if irritation occurs.

5. Fire Fighting Measures

Flash Point: 157C literature.
Fire: Combustible. Vapors are heavier than air and may spread along floors. Forms explosive mixtures with air on intense heating. Development of hazardous combustion gases or vapors is possible in the event of fire. In a fire or if heated, a pressure increase will occur and the container may burst.
Suitable extinguishing media: Water spray, dry powder, foam, carbon dioxide. Avoid solid water stream.
Products of Combustion: Oxides of carbon and toxic fumes will be formed.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Use means suitable for extinguishing surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes. Fire-extinguishing work is done from the windward and a suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place.

6. Accidental Release Measures

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage:
Small Spill: For small spills use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to legal requirements.
Large Spill: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Use a shovel to put into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and disposing of it according to legal requirements.

7. Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Product should be worked up in closed equipment as far as possible. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like Strong oxidizing agents, Nitrates, Bases, acids, Chlorine. Containers of this material may be hazardous when empty.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits:
USA ACGIH TLV(TWA): 5 mg/m3.
OSHA PEL(TWA): 5 mg/m3.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): If the exposure limit is exceeded and engineering controls are not feasible, a full face piece particulate respirator (NIOSH type N100 filters) may be worn for up to 50 times the exposure limit or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest. If oil particles (e.g., lubricants, cutting fluids. glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face piece positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

9. Physical and Chemical Properties

Appearance: Clear colourless liquid.
Odor: Slight Aromatic.
Odor threshold: Not available.
pH: Neutral @ 10mg/liter literature.
Relative density: around 1.05
Melting point/freezing point: -35C.
Initial boiling point and boiling range: 340C.
Flash Point: 157C literature.
Auto-ignition temperature: 402C.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: Very slightly soluble in water.
Viscosity: Not available.
Molecular Formula: C16H22O4
Molecular Weight
: 278.35

10. Stability and Reactivity

Stability: It is stable under ordinary conditions of use and storage. Forms explosive mixtures with air on intense heating. Dust explosion for fine distribution, when whirled up in air.
Hazardous Decomposition Products: Toxic gases and vapors may be released if involved in a fire. Oxides of carbon and toxic fumes will be formed.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents, Nitrates, Bases, acids, Chlorine.
Conditions to Avoid: Incompatibles, heat, sunlight.

11. Toxicological Information

LD50 oral rat: 6279 mg/kg.
LD50 dermal rat: > 21000 mg/kg
Carcinogenicity: No data available
Reproductive toxicity: May damage the unborn child. May damage fertility.

12. Ecological Information

Toxicity to fish: static test LC50 - Lepomis macrochirus (Bluegill sunfish) - ca. 0,48 mg/l - 96 h.
Toxicity to daphnia and other aquatic invertebrates: static test EC50 - Daphnia magna (Water flea) - ca. 2.99 mg/l - 48 h. Very toxic to aquatic life.
Persistence and Degradability: Unlikely to persist due to water solubility.
Mobility: Likely to be mobile due to water solubility.
Bioaccumulation/ Accumulation: Readily biodegradable.
Results of PBT and vPvB assessment: No data available for assessment.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Dispose of containers and unused material as per the law.

14. Transport Information

USA DOT & ADR/RID:
Shipping Name: Environmentally hazardous substance, liquid, n.o.s. (dibutyl phthalate)
Identification No. UN 3082, Hazard Class/Division 9; Packing Group PG III.
IATA & IMDG:
Shipping Name: Environmentally hazardous substance, liquid, n.o.s. (dibutyl phthalate)
Identification No. UN 3082, Hazard Class/Division 9; Packing Group PG III.

15. Regulatory Information

USA:
SARA 311/312: Acute, Chronic. See section 2.

16. Other Information

European Labeling in Accordance with EC Directives:
H360: May damage fertility or the unborn child.
H410: Very toxic to aquatic life with long lasting effects.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbols:
Xn = Harmful.
N = Dangerous for the environment.
Risk Phrases:
R60 May impair fertility.
R61 May cause harm to the unborn child.
R50/53 - Very toxic to aquatic organisms, may cause long-term adverse effects.

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************