Isoamyl Alcohol or Isopentyl Alcohol or Isopentanol or 3-Methyl-1-butanol Analytical Reagent Grade Manufacturers, with SDS GHS MSDS Sheet

Supplier, Manufacturer, Exporter of Isoamyl Alcohol or Isopentyl Alcohol or Isopentanol or 3-Methyl-1-butanol, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc.

The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer.

The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals
ISO9001 ISO IEC 17025 ISO14001 ISO 45001 ISO 22000 HACCP FSSC22000 HACCP GMP Good Laboratory fssai HACCP halal jkkosher allergen free Gluten Free Reach

Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself

Search our website here:

Home --------- Contact

Chemical Products

Export to USA UAE Europe Africa Tanzania Kenya Egypt Turkey Jumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc. Packing Palletized and Shrink Wrapped; 25kg or 50kg or 55 lbs HDPE laminated bags with an extra HMHDP liner Drum Packing for better transportation Drum Packing & Palletized Liquid Chemical Export Import Air Freighting

Isoamyl Alcohol or Isopentyl Alcohol or Isopentanol or 3-Methyl-1-butanol CAS Number 123-51-3, EINECS EC Number: 204-633-5, Molecular Formula: C5H12O, Molecular Weight: 88.15, FEMA: 2057, HS Code 29051900 or 29051990

How big is your requirement or how small
We serve it all.

Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for Isoamyl Alcohol or Isopentyl Alcohol or Isopentanol or 3-Methyl-1-butanol.

For SDS MSDS Sheet Click
SDS MSDS Sheet of Isoamyl Alcohol or Isopentyl Alcohol or Isopentanol or 3-Methyl-1-butanol Manufacturers

Isoamyl Alcohol
Isopentyl Alcohol or Isopentanol or 3-Methyl-1-butanol Analytical Reagent Suppliers
Isoamyl Alcohol or Isopentyl Alcohol

Isoamyl Alcohol or Isopentyl Alcohol or Isopentanol or 3-Methyl-1-butanol is a colorless liquid with the formula C5H12O or (H3C–)2CH–CH2–CH2–OH. Isoamyl alcohol is an ingredient in the production of banana oil, an ester found in nature and produced as a flavoring in industry. Besides its use in the synthesis of banana oil, isoamyl alcohol is also an ingredient of Kovac's reagent, used for the bacterial diagnostic indole test. Isoamyl alcohol is used as a solvent for the preparation of synthetic fruit flavours, such as apricot, banana, cheery, greengage, malt, orange, plum and whiskey flavours, and is a raw material in the production of synthetic banana oil. It is one of the components of the aroma of the black truffle. It is also used for estimation of fat in milk and milk products. In pharmaceuticals, it is the initial raw material for a number of drug preparations.

General Properties and Specifications of Isoamyl Alcohol or Isopentyl Alcohol or Isopentanol:
Appearance: Clear, colorless liquid.
Odor: Mild disagreeable odor.
Assay: 99%
Acidity (CH3COOH): 0.001% maximum.
Iron as FE: 0.00001% maximum.
Heavy Metals (Pb): 0.00001% maximum.
Acids and esters (CH3COOC5H11): 0.06% maximum.
Water by KF: 0.2% maximum.
Relative density: 0.81
Melting point: -117C literature.
Boiling point: 131C literature.
Flash point: 43C.
Auto-ignition temperature: 350C.
Solubility: Moderately soluble in water.
Storage: +2C to 30C.


Isopentyl Alcohol or Isoamyl Alcohol or 3-Methyl-1-butanol Analytical Reagent Grade Specifications:
(CH3)2CHCH2CH2OH --- Formula Weight 88.15
CAS Number 123-51-3
REQUIREMENTS
Assay: 98.5% C5H11OH

MAXIMUM ALLOWABLE
Water (H2O): 0.5%
Titrable acid: 0.002 meq/g
Residue after evaporation: 0.003%
Acids and esters (as amyl acetate): 0.2%
Carbonyl compounds (as HCHO): 0.1%

We also manufacture and supply as under:

Allyl Alcohol

n-Amyl Alcohol

Benzyl Alcohol

Isoamyl Alcohol

Isoamyl Acetate

Isopropyl Alcohol

Polyvinyl Alcohol.

Manufacturers:

MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30

e-mail: info@mubychem.com

USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)

Manufacturers india
Copyright and Usual Disclaimer is Applicable.
Last 3 October, 2023

List of All the IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals
Best Seller Fast Moving IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals Ex-stock Items
Aluminum Chloride Hexahydrate Aluminium Potassium Sulphate
Ammonium Bicarbonate Ammonium Carbonate
Ammonium Chloride Ammonium Persulfate
Borax; Sodium Borate Boric Acid
Calcium Chloride Calcium Saccharate
Calcium Sulfate Carbamide Peroxide
Chromic Chloride Cupric or Copper Chloride
Ferric Chloride Hexahydrate Fumaric Acid
Glacial Acetic Acid Lactobionic Acid
Magnesium Chloride Magnesium Sulfate
Manganese Chloride Manganese Sulfate
Potassium Bromide Potassium Chloride
Potassium Hydroxide Pellets Potassium Nitrate
Propylene Carbonate Potassium Monopersulfate
Selenious acid Sodium Acetate
Sodium Bromate Sodium Diacetate
Sodium Formaldehyde Bisulfite Sodium Lactobionate
Sodium Thiosulfate Zinc Chloride

Exporter & Importer By Air Exports Exporters & Improters Isoamyl Alcohol or Isopentyl Alcohol Manufacturers

Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.

Global or International Suppliers, Exporters, Importers, Manufacturers

I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again

Isoamyl Alcohol or Isopentyl Alcohol or Isopentanol or 3-Methyl-1-butanol
SDS GHS, Safety Data Sheet

MSDS Sheet, Material Safety Data Sheet
29-July-23

1. Product Identification

Product Name & Other Names: Isoamyl Alcohol or Isopentyl Alcohol or Isopentanol or 3-Methyl-1-butanol.
CAS No.: 123-51-3
EINECS EC No.: 204-633-5
Molecular Formula: C5H12O or (H3C–)2CH–CH2–CH2–OH
Molecular Weight: 88.15
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Supplier: As per letterhead.

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
:
Flammable liquids (Category 3) - H226
Skin irritation (Category 2) - H315
Serious eye damage (Category 1) - H318
Acute toxicity, Inhalation (Category 4) - H332
Specific target organ toxicity - single exposure (Category 3), Respiratory system - H335
Labeling according to Regulation (EC) No 1272/2008

GHS Label Elements
Corrosive
Corrosive

GHS Label Elements
Flammable
Flammable

Signal Words: Danger

Hazard statements:
H226: Flammable liquid and vapor.
H315: Causes skin irritation.
H318: Causes serious eye damage.
H332 Harmful if inhaled.
H335: May cause respiratory irritation.

Precautionary statements:
P210: Keep away from heat/sparks/open flames/hot surfaces – No smoking.
P233: Keep container tightly closed.
P240: Ground/bond container and receiving equipment.
P241: Use explosion-proof electrical/ventilating/light/…/equipment.
P242: Use only non-sparking tools.
P243: Take precautionary measures against static discharge.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P303+361+353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P370+378: In case of fire: Use Water spray, Carbon dioxide (CO2), Foam, Dry powder, and Sand for extinction.
P403+233+235: Store in a well-ventilated place. Keep container tightly closed. Keep cool.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard symbols:
F = Extremely Flammable
C = Corrosive
Xn = Harmful
R-phrases:
R 10 Flammable.
R20 Harmful by inhalation.
R41 Risk of serious damage to eyes.
R37/38 Irritating to respiratory system and skin.

3. Composition/Information on Ingredients

Product Name & Other Names: Isoamyl Alcohol or Isopentyl Alcohol or Isopentanol or 3-Methyl-1-butanol.
CAS No.: 123-51-3
EINECS EC No.: 204-633-5

4. First Aid Measures

Always seek medical attention after first aid measures are provided.

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Note to physicians: Product is a corrosive material.

5. Fire Fighting Measures

Flammability of the Product: Flammable.
Flash Points: 43C.
Products of Combustion: Carbon dioxide, Carbon monoxide, fumes.
Auto-ignition temperature: 350C.
Fire Extinguishing Media: Use Dry powder and dry sand for extinction. Water spray, alcohol-resistant foam or carbon dioxide may also be used. Do NOT use water jet. Flammable liquid and vapor. Vapors are heavier than air and may travel to a source of ignition and flash back. Vapors can spread along the ground and collect in low or confined areas. Never direct a water jet in the container to prevent any splashing of the product which could cause spreading of the fire. Cool containing vessels with water jet to prevent pressure build-up, auto-ignition, or explosion.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures it may produce toxic or irritating fumes. These substances will accelerate burning when involved in a fire. Some may burn rapidly with flare burning effect. Some may decompose explosively when heated or involved in a fire. May ignite combustibles (wood paper, oil, clothing, etc.). Thermal decomposition can lead to the release of irritating and toxic gases and vapors.

6. Accidental Release Measures

Personal precautions, protective equipment, and emergency procedures: Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental  precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage:
Small Spill: Avoid mist formation. Avoid breathing mist. Ensure adequate ventilation. Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. Remove all sources of ignition. Provide proper ventilation. Absorb the material on a porous, inert material such as earth, sand, or vermiculite. Carefully sweep solid/powder up the material without causing dust. Dispose of it in accordance with local regulations. The spillage should be transferred to a suitable container and recovered or disposed of in accordance with local regulations. Because of the danger of spontaneous combustion, any combustible material, such as cloth, used for cleaning spillages, should be saturated with water, and disposed of promptly, preferably by incineration.

7. Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Provide appropriate exhaust ventilation at places where dust/mist/vapor is formed. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Do not ingest. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces. If you feel unwell, seek medical attention.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, strong reducing agents, acid chlorides, acid anhydrides, alkali metals, strong acids and bases, halogens. Keep the product in its original container well sealed, in a dry and ventilated area, away from potential sources of ignition and light.
Keep away from sources of ignition - No smoking. Take measures to prevent the build-up of electrostatic charge. Storage: +2C to 30C.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: USA ACGIH = 125 ppm STEL.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

9. Physical and Chemical Properties

Appearance: Clear colorless liquid.
Odor: Mild disagreeable odor.
Odor threshold: Not available.
pH: Not available.
Relative density: 0.810
Melting point/freezing point: -117C literature.
Initial boiling point and boiling range: 131C literature.
Flash point: 43C.
Auto-ignition temperature: 350C.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility(ies): Moderately soluble in water.
Viscosity: Not available.
Molecular Formula: C5H12O or (H3C–)2CH–CH2–CH2–OH
Molecular Weight: 88.15

10. Stability and Reactivity

Stability: Stable under ordinary conditions of use and storage. Vapor/air-mixtures are explosive at intense warming.
Hazardous Decomposition Products: It emits Carbon dioxide, Carbon monoxide & Toxic Fumes.
Hazardous Polymerization: Will not occur.
Incompatibilities: Heat, strong oxidizing agents, strong reducing agents, acid chlorides, acid anhydrides, alkali metals, strong acids and bases, halogens.
Conditions to Avoid: Incompatibles, heat, flame, sparks & light.

11. Toxicological Information

Toxicity data
Oral LD50 Rat = 1300 mg/kg.
LD50 Dermal Rabbit = 3250 mg/kg
Carcinogenicity: Not listed by ACGIH, IARC, NTP, or CA Prop 65.
Teratogenicity: No information found
Reproductive Effects: No information found
Mutagenicity: No information found.

12. Ecological Information

Toxicity to fish: static test LC50 - Oncorhynchus mykiss (rainbow trout) - 700 mg/l - 96 h.
Toxicity to daphnia and other aquatic invertebrates: EC50 - Daphnia - 260 mg/l - 48 h.
Persistence and Degradability: Soluble in water Persistence is unlikely.
Bioaccumulation/ Accumulation: No information available.
Mobility: Will likely be mobile in the environment due to its water solubility.
Results of PBT and vPvB assessment: No data available for assessment.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of containers and unused contents in accordance with federal, state, and local requirements.

14. Transport Information

DOT USA, TDG Canada & ADR/RID Europe:
UN Number: UN 1105
Shipping Name: Pentanols
Hazard Class: 3; Packing Group: III.
IATA & IMDG/IMO:
UN Number: UN 1105
Shipping Name: Pentanols
Hazard Class: 3; Packing Group: III.

15. Regulatory Information

USA:
SARA 311/312 Hazards: Fire Hazard: Immediate Health Hazard. See section 2.
California Prop. 65: This product does not contain any chemicals known to the State of California to cause cancer, birth, or any other reproductive defects.

16. Other Information

European Labeling in Accordance with EC Directives:
H226: Flammable liquid and vapor.
H315: Causes skin irritation.
H318: Causes serious eye damage.
H332 Harmful if inhaled.
H335: May cause respiratory irritation.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard symbols:
F = Extremely Flammable
C = Corrosive
Xn = Harmful
R-phrases:
R 10 Flammable.
R20 Harmful by inhalation.
R41 Risk of serious damage to eyes.
R37/38 Irritating to respiratory system and skin.

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************