|
(FDA) GMP Approved ISO-22000:2005 Kosher Certified Halal Certified HACCP |
Mubychem Group, established in 1976, is the pioneer manufacturer of Zinc Chloride, Ammonium Chloride, Calcium Chloride, Potassium Chloride, Sodium Acetate, Sodium Thiosulphate, Magnesium Phosphate, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India. |
For Translating this page in your language use this translation tool (Refresh if the tool is not seen). |
Magnesium Phosphate USP Magnesium Phosphate Manufacturers
Anhydrous CAS No.: 7757-87-1, Molecular Weight: 262.86, Chemical Formula: Mg3(PO4)2
Buy Magnesium Phosphate; Door Delivery
For MSDS Sheet Click MSDS of Magnesium Phosphate Manufacturers
Magnesium Phosphate
Technical & Pure Crystals
Also IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
Magnesium Phosphate USP
Magnesium PhosphateMg3(PO4)2·5H2O 352.93
Phosphoric acid, magnesium salt (2:3), pentahydrate.
Magnesium phosphate (3:2) pentahydrate [10233-87-1].
Anhydrous 262.86 [7757-87-1].
Magnesium Phosphate, ignited at 425 to constant weight, contains not less than 98.0 percent and not more than 101.5 percent of Mg3(PO4)2.
Identification—
A: Dissolve about 200 mg in 10 mL of 2 N nitric acid, and add,
drop wise, ammonium molybdate TS: a greenish yellow precipitate of ammonium
phosphomolybdate is formed and it is soluble
in 6 N ammonium hydroxide.
B: Dissolve 0.1 g in 0.7
mL of 1 N
acetic acid and 20 mL of water. Add 1
mL of ferric chloride TS, allow
to stand for 5 minutes, and filter: 5
mL of the filtrate responds to the test for
Magnesium.
Microbial limits— It meets the requirements
of the test for absence of Escherichia coli.
Loss on ignition— Ignite it at 425 to constant weight: it
loses between 20.0% and 27.0% of its weight.
Acid-insoluble substances— If an
insoluble residue remains in the test for Carbonate, filter the
solution, wash well with hot water until the last washing is free from
chloride, and ignite the residue: the weight of the residue does not
exceed 4 mg (0.2%).
Soluble substances— Digest 2.0 g with 100 mL
of water on a steam bath for 30 minutes, cool, add sufficient water to
restore the original volume, mix, and filter. Evaporate 50
mL of the filtrate to dryness, and ignite
gently to constant weight: the weight of the residue does not exceed 15
mg (1.5%).
Carbonate— Mix 2.0 g with 20 mL of
water, and add hydrochloric acid, drop wise,
to effect solution: no effervescence occurs when the acid is added.
Chloride— Dissolve 0.50 g in 50
mL of
2 N nitric acid, and add 1 mL of silver
nitrate TS: the turbidity does not exceed that produced by 1.0
mL of 0.020 N hydrochloric acid (0.14%).
Limit of nitrate— Mix 0.20 g with 5
mL
of water, and add just sufficient hydrochloric acid to effect solution.
Dilute with water to 10 mL, add 0.1
mL of indigo carmine TS, then add, with stirring, 10mL of sulfuric acid: the blue color
persists for not less than 5 minutes.
Sulfate— Dissolve 0.50 g in the smallest possible amount of 3 N
hydrochloric acid, dilute with water to 48 mL,
and add 2 mL of barium chloride TS: the
turbidity does not exceed that produced by 3.0 mL
of 0.020 N sulfuric acid (0.6%).
Arsenic—The limit is 3
ppm.
Barium— Mix 2.0 g with 40 mL of
water, heat, add hydrochloric acid, drop wise,
to effect solution, and then add 1 mL of
acid in excess. Cool, dilute with water to 50 mL,
and filter. To 5 mL of the filtrate add 1
mL of potassium sulfate TS: no turbidity is
produced within 15 minutes.
Calcium— Mix 0.50 g with 15 mL of
water, heat, and add sufficient hydrochloric acid, in small portions, to
effect solution. Cool, add 6 N ammonium hydroxide, in small portions, to
produce a slight permanent precipitate, then
add 2 mL of 6 N acetic acid. Dilute with
water to 25 mL, and filter. To 10
mL of the filtrate add 2
mL of ammonium oxalate TS: not more than a
slight turbidity is produced within 5 minutes.
Dibasic salt and magnesium oxide— Ignite about 2.5 g to constant
weight. Weigh accurately about 2 g of ignited salt, and dissolve it by
warming with 50.0 mL of 1 N hydrochloric
acid VS. Cool, add 1 or 2 drops of methyl orange TS, and slowly titrate
the excess 1 N hydrochloric acid VS with 1 N sodium hydroxide VS to a
yellow color, vigorously shaking the mixture during the titration.
Between 14.8 and 15.4 mL of 1 N hydrochloric
acid is consumed for each g of the ignited salt.
Lead— the limit is 5
ppm.
Heavy metals— the limit is 0.003%.
Magnesium Phosphate, Dibasic, Mixed Hydrates FCC
MgHPO4·xH2O
DESCRIPTION
Magnesium Phosphate, Dibasic, Mixed Hydrates, occurs as a white,
crystalline powder that is a partially dehydrated form of a mixture of
magnesium phosphate, dibasic—in the trihydrate,
dihydrate, and anhydrous forms—and of
magnesium pyrophosphate. It is slightly soluble in water and insoluble
in alcohol, but is soluble in dilute acids.
Function: Nutrient; leavening agent; pH control agent.
REQUIREMENTS
Identification:
A. Dissolve about 200 mg of sample in 10 mL
of 1.7 N nitric acid, and add, drop wise,
ammonium molybdate TS. A green-yellow
precipitate of ammonium phosphomolybdate
forms that is soluble in 6 N ammonium
hydroxide.
B. Dissolve about 100 mg of sample in 0.5
mL
of 1 N acetic acid and 20 mL of
water. Add 1 mL of ferric chloride TS, let
the solution stand for 5 min, and filter. The filtrate gives a positive
test for Magnesium.
Assay: Not less than 96.0% of Mg2P2O7,
calculated after ignition.
Arsenic: Not more than 3 mg/kg.
Fluoride: Not more than 25 mg/kg.
Lead: Not more than 2 mg/kg.
Loss on Ignition: Between 15.0% and 28.9%.
Magnesium Phosphate, Dibasic, Trihydrate FCC
Di-magnesium PhosphateMgHPO4·3H2O Formula wt 174.33
INS: 343(ii) CAS: [7782-75-4]
DESCRIPTION
Magnesium Phosphate, Dibasic,
Trihydrate,
occurs as a white, dibasic, crystalline powder. It contains three
molecules of water of hydration. It is slightly soluble in water and
insoluble in alcohol, but is soluble in dilute acids.
Function: Nutrient; leavening agent; pH control agent.
REQUIREMENTS
Identification:
A. Dissolve about 200 mg of sample in 10 mL
of 1.7 N nitric acid, and add, drop wise,
ammonium molybdate TS. A green-yellow
precipitate of ammonium phosphomolybdate
forms that is soluble in 6 N ammonium
hydroxide.
B. Dissolve 100 mg of sample in 0.5
mL of 1 N acetic acid and 20
mL of water. Add 1
mL of ferric chloride TS, let the solution
stand for 5 min, and filter. The filtrate gives a positive test for Magnesium.
Assay: Not less than 96.0% of Mg2P2O7,
calculated after ignition.
Arsenic: Not more than 3 mg/kg.
Fluoride: Not more than 25 mg/kg.
Lead: Not more than 2 mg/kg.
Loss on Ignition: Between 29.0% and 36.0%.
Magnesium Phosphate, Tribasic FCC
Tri-magnesium PhosphateMg3(PO4)2·xH2O Formula wt, anhydrous 262.86
INS: 334(iii) CAS: [7757-87-1]
DESCRIPTION
Magnesium Phosphate,
Tribasic, occurs as
a white, crystalline powder. It may contain four, five, or eight
molecules of water of hydration. It is readily soluble in dilute mineral
acids, but is almost insoluble in water.
Function: Nutrient.
REQUIREMENTS
Identification:
A. Dissolve about 200 mg of sample in 10 mL
of 1.7 N nitric acid, and add, drop wise,
ammonium molybdate TS. A green-yellow
precipitate of ammonium phosphomolybdate
forms that is soluble in 6 N ammonium
hydroxide.
B. Dissolve 100 mg of sample in 0.7
mL of 1 N acetic acid and 20
mL of water. Add 1
mL of ferric chloride TS, let the solution
stand for 5 min, and filter. The filtrate gives a positive test for Magnesium.
Assay: Not less than 98.0% and not more than
101.5% of Mg3(PO4)2, calculated on the
ignited basis.
Arsenic: Not more than 3 mg/kg.
Fluoride: Not more than 10 mg/kg.
Lead: Not more than 2 mg/kg
Loss on Heating: Tetrahydrate:
Between 15.0% and 23.0%; Pentahydrate:
Between 20.0% and 27.0%; Octahydrate: Between 30.0% and 37.0%.
Magnesium Phosphate USP
Magnesium Phosphate Manufacturers:
MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIATEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264
e-mail: info@mubychem.com
Cell Call
to Anmol: +91-9821870100
USA & Canadian Customers may Call
773-829-5811
Copyright and Usual Disclaimer is
Applicable.
Last updated
09 December, 2011
| Old Spice: Manufacturing since more than Three Decades: | |||
|
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals |
|||
| Borax; Sodium Borate | |||
| Calcium Chloride | |||
| Chromic Chloride | |||
| Manganese Chloride | Manganese Sulfate | Methylene Blue | Potassium Chloride |
| Sodium Acetate | Sodium Hydroxide | Sodium Thiosulfate | |
| Zinc Chloride | |||
|
Pharmaceuticals & Food Grade, IP BP USP FCC ACS Gr. of Chemicals mfd. by Anmol Chemicals |
|||
|
|
|||
| Sodium Citrate | Titanium Dioxide | ||
| Zinc Carbonate | |||
Global or International Magnesium Phosphate BP USP... Suppliers, Exporters, Importers, Manufacturers
Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc.
----------------