|
|
Mubychem Group, established in
1976, is the pioneer manufacturer of Zinc Chloride, Ammonium
Chloride, Calcium Chloride, Potassium Chloride, Sodium Acetate,
Sodium Thiosulphate, Pharmaceutical, Fragrance & Flavor chemicals in
|
For Translating this page in your language use this translation tool (Refresh if the tool is not seen). |
Buy Magnesium Chloride; Door Delivery
Magnesium Chloride Technical & Pure
We manufacture magnesium chloride in all grades like technical, pure, food grade, IP BP USP AR ACS Grade etc.
Magnesium Chloride USP
MgCl2·6H2O
203.30
Mag. Chlo. hexahydrate [7791-18-6].
Anhydrous 95.21 [7786-30-3].
Magnesium Chloride contains not less than 98.0 percent and not more than 101.0 percent of MgCl2·6H2O.
Packaging and storage—
Preserve in tight containers.
Labeling—
Where the product is intended for use
in hem dialysis, it is so labeled.
Identification—
A solution (1 in 20) responds to the tests for Magnesium and for
Chloride
pH :
between 4.5 and 7.0, in a 1 in 20 solution in
carbon dioxide-free water.
Insoluble matter— not more than 0.005% is found.
Sulfate
221 — A 10-g portion shows no more
sulfate than corresponds to 0.50 mL of 0.020 N sulfuric acid (0.005%).
Barium—
Dissolve 1 g in 10 mL of water, and add 1 mL
of 2 N sulfuric acid: no turbidity is produced within 2 hours.
Limit of calcium—
the limit is 0.01%.
Potassium—
Dissolve 5 g in 5 mL of water, and add 0.2 mL
of sodium bitartrate TS: no turbidity is produced within 5 minutes.
Aluminum
(where it is labeled as intended for use in
hem dialysis)— the limit is 1 µg per g.
Heavy metals —
the limit is 0.001%.
Organic volatile impurities
: meets the requirements.
Magnesium Chloride Hexahydrate BP
MgCl2,6H2O
Action and use
Used in the treatment of electrolyte deficiencies and in dialysis solutions.
Preparation
Magnesium Chloride Injection
DEFINITION
Content
98.0 per cent to 101.0 per cent of MgCl2,6H2O.
CHARACTERS
Appearance
Colourless crystals, hygroscopic.
Solubility
Very soluble in water, freely soluble in ethanol (96 per cent).
IDENTIFICATION
ıA. Water % (see Tests).
ıB. It gives reaction of chlorides.
C. It gives the reaction of magnesium.
TESTS
Solution S
Dissolve 10.0 g in carbon dioxide-free water R
prepared from distilled water and dilute to 100.0 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
Acidity or alkalinity
To 5 ml of solution S add 0.05 ml of
phenol red solution R. Not more
than 0.3 ml of 0.01 M hydrochloric acid or 0.01 M sodium hydroxide
is required to change the colour of the indicator.
Bromides
Maximum 500 ppm.
Sulphates
Maximum 100 ppm, determined on solution S.
Aluminium
Maximum 1 ppm, if intended for use in the manufacture of peritoneal dialysis
solutions, hem dialysis solutions, or haemofiltration solutions.
Arsenic
Maximum 2 ppm, determined on 0.5 g.
Calcium
Maximum 0.1 per cent.
Iron
Maximum 10 ppm, determined on solution S.
Potassium
Maximum 5.0 × 102 ppm, if intended for use in the manufacture of
parenteral dosage forms.
Atomic emission spectrometry. Passes the test
Heavy metals
Maximum 10 ppm.
Water
51.0 per cent to 55.0 per cent, determined on 50.0 mg.
Magnesium Chloride as per US Food Chemical
Codex
MgCl2·6H2O Formula wt
203.30
DESCRIPTION
Magnesium Chloride occurs
as colorless flakes or crystals. It contains six molecules of water of
hydration. It is hygroscopic, very soluble in water, and freely soluble in
alcohol.
Function Color-retention agent; firming agent.
REQUIREMENTS
Identification A
1:10 aqueous solution gives positive tests for Magnesium and for Chloride,
Assay Not less than 99.0% and not more than 105.0% of
MgCl2·6H2O.
Ammonium Not more
than 0.005%.
Lead Not more than
4 mg/kg.
Sulfate Not more
than 0.03%.
Magnesium Chloride Hexahydrate as per ACS Specifications
American Chemical Society Reagent Grade
MgCl2
. 6H2O
Formula Wt 203.30
CAS Number 7791-18-6
REQUIREMENTS
Assay
99.0-102.0% MgCl2 . 6H2O
MAXIMUM ALLOWABLE
Insoluble
matter 0.005%
Nitrate (NO3)
0.001%
Phosphate (PO4) 5
ppm
Sulfate (SO4)
0.002%
Ammonium (NH4) 0.002%
Barium (Ba) 0.005%
Calcium (Ca) 0.01%
Manganese (Mn) 5 ppm
Potassium (K) 0.005%
Sodium (Na) 0.005%
Strontium (Sr) 0.005%
Heavy metals (as Pb) 5 ppm
Iron (Fe) 5 ppm
Magnesium Chloride manufacturer at:
MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA.
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564.
FAX: 91-22-23728264.
e-mail:
info@mubychem.com
Cell Call to Anmol: +91-9821870100 or Ambrish: +91-9821570100
Copyright
and Usual
Disclaimer
is Applicable.
Last
updated: 07 May, 2010.
If you want your work to be done well, then go to a busy man.
The other one has no time.
|
Old Spice: Manufacturing since more than Three Decades: |
|||
|
Pharmaceuticals & Food Grade, IP BP USP FCC ACS A.R Gr. of Chemicals mfd. by Anmol Chemicals: |
|||
|
Other Best Seller Products: |
|||
Refresh Yourself with these pleasant thoughts.
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favour that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again.
IT IS NICE TO BE IMPORTANT BUT ….... BUT IT IS MORE IMPORTANT TO BE NICE
If I give you “My Word” Nobody can undo it. If I sign an “Agreement” my Lawyer will undo it
The trouble with the Rat Race is; Even if you Win you are still a Rat
If you want your work to be done well, then go to a busy man. The other one has no time.
If you pick up a hungry dog and feed it, It will never bite you. That is the principal difference between a dog and a man.
Wise men never sit and cry over their loss. But work on to redress the same.
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favour that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again.