|
(FDA) GMP Approved ISO-22000:2005 Kosher Certified Halal Certified HACCP |
Mubychem Group, established in 1976, is the pioneer manufacturer of Zinc Chloride, Ammonium Chloride, Calcium Chloride, Potassium Chloride, Sodium Acetate, Sodium Thiosulfate, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India. |
For Translating this page in your language use this translation tool (Refresh if the tool is not seen). |
--------
--------
Zinc Chloride BP Zinc Chloride USP Manufacturers
Synonyms:
Zinc Dichloride, Zinc Butter; CAS No.: 7646-85-7
Molecular Weight: 136.30; Chemical Formula: ZnCl2
Zinc
Chloride IP, Technical & Pure
For MSDS Sheet Click
MSDS of Zinc Chloride Manufacturers
Zinc Chloride
IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
Zinc Chloride USP
Assay— Zinc Chloride
contains not less than 97.0 percent and not more than 100.5 percent of ZnCl2.
Packaging and storage— Preserve in tight containers.
Identification—
A
solution of it responds to the tests for Zinc and for Chloride.
Limit of oxychloride— Dissolve 1.0 g in 20 mL of water, add 20 mL of alcohol, and mix. To 10 mL of the
mixture add 0.30 mL of 1.0 N hydrochloric acid: the solution becomes perfectly
clear.
Sulfate— Dissolve 1.0 g
in 30 mL of water: 20 mL of this solution shows no more sulfate than corresponds
to 0.20 mL of 0.020 N sulfuric acid (0.03%).
Limit of ammonium salts— To 5 mL of a solution (1 in 10) add 1 N sodium hydroxide until the precipitate first formed is
re-dissolved, and then warm the solution: no odor of ammonia is perceptible.
Lead— Dissolve 0.50 g
in 5 mL of water, and transfer the solution to a color-comparison tube (A).
Add 15 mL of Potassium Cyanide Solution (1 in 10), mix, and allow the
mixture to become clear. In a similar, matched color-comparison tube (B)
place 5 mL of water, and add 2.50 mL of Standard Lead Solution (see Heavy Metals
231 ) and 15 mL of Potassium Cyanide Solution (1 in 10).
Add to the solution in each tube 0.1 mL of sodium sulfide TS. Mix the contents
of each tube, and allow to stand for 5 minutes: viewed downward over a white
surface, the solution in tube A is not darker than that in tube B (indicating not more than 0.005% of lead).
Alkalies and alkaline
earths— Dissolve 2.0 g in about 150 mL of water contained in a 200-mL
volumetric flask. Add sufficient ammonium sulfide TS to precipitate the zinc
completely, dilute with water to volume, and mix. Filter through a dry filter,
and reject the first portion of the filtrate. To 100 mL of the subsequent
filtrate add 5 drops of sulfuric acid, evaporate to dryness, and ignite: the
weight of the residue does not exceed 10 mg (1.0%).
Organic volatile impurities: meets the requirements
Zinc Chloride BP Specifications
Zinc Chloride BP ZnCl2
DEFINITION
Content
95.0 per cent to 100.5 per cent.
CHARACTERS
Appearance
White or almost white, crystalline powder or cast
in white or almost white sticks, deliquescent.
Solubility
Very soluble in water, freely soluble in ethanol
(96 per cent) and in glycerol.
IDENTIFICATION
A.
Dissolve 0.5 g in dilute nitric
acid R and dilute to 10 ml with the
same acid. The solution gives reaction of chlorides.
B
5 ml of solution S gives the reaction of zinc.
TESTS
Solution S
To 2.0 g add 38 ml of carbon
dioxide-free water R prepared from
distilled water
and add dilute
hydrochloric acid drop wise until
dissolution is complete. Dilute to 40 ml with carbon
dioxide-free water prepared from
distilled water.
pH
4.6 to 5.5.
Dissolve 1.0 g in 9 ml of carbon
dioxide-free water, ignoring any
slight turbidity.
Oxychloride
Dissolve 1.5 g in 1.5 ml of carbon
dioxide-free water R. The solution is
not more opalescent than reference suspension. Add 7.5 ml of ethanol (96 per
cent). The solution may become cloudy
within 10 min. Any cloudiness disappears on the addition of 0.2 ml of dilute
hydrochloric acid.
Sulphates
Maximum 200 ppm.
Aluminium, calcium, heavy
metals, iron, magnesium
To 8 ml of solution S add
2 ml of concentrated ammonia
R and shake. The solution is clear and colourless.
Add 1 ml of disodium hydrogen phosphate solution.
The solution remains clear
for at least 5 min. Add 0.2 ml of sodium sulphide solution.
A white precipitate is formed and the supernatant liquid remains colourless.
Ammonium
Maximum 400 ppm.
Zinc Chloride Injection USP Specifications
Zinc Chloride Injection is a sterile solution of Zinc Chloride in Water for Injection. It contains not less than 90.0 percent and not more than 110.0 percent of the labeled amount of zinc (Zn).Packaging and storage— Preserve Zinc Chloride in single-dose or multiple-dose containers, preferably of Type I or Type II glass.
Labeling— Label the Injection to indicate that it is to be diluted with Water for Injection or other suitable fluid to appropriate strength prior to administration.
Identification— The Assay preparation prepared as directed in the Assay exhibits an absorption maximum at about 213.8 nm, when determined as directed in the Assay.
Bacterial endotoxins— It contains not more than 25.0 USP Endotoxin Units per mg of zinc.
pH: between 1.5 and 2.5.
Particulate matter: meets the requirements for small-volume injections.
Other requirements— It meets the requirements under Injections 1
Zinc Chloride ACS specifications
American Chemical Society Reagent GradeZinc Chloride ZnCl2
Formula Wt 136.30
CAS Number 7646-85-7
REQUIREMENTS
Assay ........................... 97.0%
ZnCl2 Zinc Chloride
MAXIMUM ALLOWABLE
Oxychloride ................... Passes
test
Insoluble matter .............. 0.005%
Nitrate (NO3) ................
0.003%
Sulfate (SO4) .................
0.01%
Ammonium (NH4) ..........
0.005%
Calcium (Ca) .................. 0.06%
Iron (Fe) ........................
0.001%
Lead (Pb) ......................
0.005%
Magnesium (Mg) ............ 0.01%
Potassium (K) ................ 0.02%
Sodium (Na) .................. 0.05%
Zinc Chloride is used for Friedel Craft Reaction, Azotropic or Azeotropic Distillation & Desiccation.
Zinc Chloride BP
Zinc Chloride USP
Zinc Chloride manufacturers at:
MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI
400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610,
23723564. FAX: 91-22-23728264
e-mail:
info@mubychem.com
Cell Call
to Anmol: +91-9821870100
USA & Canadian Customers may Call
773-829-5811
Copyright
and Usual
Disclaimer
is Applicable.
Last updated:
15 December, 2011.
----------------
IT IS NICE TO BE IMPORTANT BUT ….... BUT IT IS MORE IMPORTANT TO BE NICE
|
Old Spice: Manufacturing since more than Three Decades: |
|||
|
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals |
|||
| Borax; Sodium Borate | |||
| Calcium Chloride | |||
| Chromic Chloride | |||
| Manganese Chloride | Manganese Sulfate | Methylene Blue | Potassium Chloride |
| Sodium Acetate | Sodium Hydroxide | Sodium Thiosulfate | |
| Zinc Chloride BP USP .. | |||
|
Pharmaceuticals & Food Grade, IP BP USP FCC ACS Gr. of Chemicals mfd. by Anmol Chemicals |
|||
| Sodium Citrate | Titanium Dioxide | ||
| Zinc Carbonate | |||
|
|
|||
Global or International Zinc Chloride BP IP USP FCC Suppliers, Exporters, Importers, Manufacturers
Zinc Chloride Manufacturers Magnesium Chloride Anhydrous
Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc.
----------------