|
(FDA) GMP Approved ISO-22000:2005 Kosher Certified Halal Certified HACCP |
Mubychem Group, established in 1976, is the pioneer manufacturer of Zinc Chloride, Ammonium Chloride, Calcium Chloride, Potassium Chloride, Sodium Acetate, Sodium Thiosulphate, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India. |
For Translating this page in your language use this translation tool (Refresh if the tool is not seen). |
--------
--------
Ammonium chloride BP Ammonium Chloride USP Ammonium Chloride Manufacturers
USP BP IP ACS FCC .....
CAS No.: 7646-85-7; Molecular Weight: 53.5; Chemical Formula: NH4Cl
For MSDS Sheet Click
MSDS Click here
Ammonium
Chloride IP Technical & Pure
Buy
Ammonium Chloride, Door Delivery
Ammonium Chloride
Pure Crystals, Tablets, Blocks, Bricks Pellets
Also IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
Ammonium Chloride USP
Ammonium Chloride BP
Assay— Ammonium
Chloride contains not less than 99.5 percent and not more than 100.5 percent of
NH4Cl, calculated on the dried basis.
Packaging and storage— Preserve in tight containers.
Identification—
A
solution (1 in 10) responds to the tests for Ammonium and for Chloride
pH: between 4.6 and 6.0,
in a solution (1 in 20).
Loss on drying— Dry it
over silica gel for 4 hours: it loses not more than 0.5% of its weight.
Residue on ignition—
Add 1 mL of sulfuric acid to about 2 g, accurately weighed, and heat the mixture
gently until volatilization is complete: the residue is white, and when ignited,
not more than 0.1% of nonvolatile substance remains.
Limit of thiocyanate—
Acidify 10 mL of a solution (1 in 10) with hydrochloric acid, and add a few
drops of ferric chloride TS: no orange-red color is produced.
Heavy metals: 0.001%.
Ammonium Chloride BP
NH4ClAmmonium Chloride USP
DEFINITION
Content or Assay
99.0 per cent to 100.5 per cent (On dried substance basis).
CHARACTERS
Appearance
White or almost white, crystalline powder or colourless crystals.
Solubility
Freely soluble in water.
IDENTIFICATION
A.
It gives the reactions of chlorides.
B.
10 ml of solution gives the reaction of ammonium salts.
TESTS
Solution
S
A
10% solution:
Appearance of solution:
Solution is clear and colourless.
Acidity or alkalinity: To 10 ml of solution S add
0.05 ml of methyl red solution. Not more than 0.5 ml of 0.01 M
hydrochloric acid or 0.01 M sodium hydroxide is required to change
the colour of the indicator.
Bromides and iodides: To 10 ml of solution S add 0.1
ml of dilute hydrochloric acid R and 0.05 ml of chloramine solution. After 1 min,
add 2 ml of chloroform R and shake vigorously. The chloroform layer
remains colourless.
Sulphates: Maximum 150 ppm.
Calcium: Maximum 200 ppm.
Iron: Maximum 20 ppm.
Heavy metals: Maximum 10 ppm.
Loss on drying: Maximum 1.0 per cent,
determined on 1.00 g by drying in an oven at 105 °C for 2 h.
Sulphated ash: Maximum 0.1 per cent,
determined on 2.0 g.
Ammonium Chloride FCC Food Grade
NH4Cl Formula wt 53.49Ammonium Chloride
DESCRIPTION
Ammonium Chloride occurs as
colorless crystals or as a white, fine or coarse, crystalline powder. It is
somewhat hygroscopic. One gram dissolves in 2.6 mL of water at 25°, in 1.4 mL of
boiling water, in about 100 mL of alcohol, and in about 8 mL of glycerin. The pH
of a 1:20 solution is between 4.5 and 6.0.
Identification: A 1:10 aqueous solution gives positive tests for Ammonium and for Chloride.
Assay: Not less than 99.0% of NH4Cl after drying.
Lead: Not more than 4 mg/kg.
Loss on Drying: Not more than 0.5%.
Ammonium Chloride ACS
American Chemical Society Reagent GradeAmmonium Chloride
NH4Cl Formula Wt 53.49
CAS Number 12125–02–9
REQUIREMENTS
Assay . . . . . . . . . . . .
. . . . ≥99.5% NH4Cl
pH of a 5% solution . . . . . 4.5–5.5 at 25 °C
MAXIMUM ALLOWABLE
Insoluble matter . . . . . . .
. 0.005%
Residue after ignition . . . . 0.01%
Calcium (Ca) . . . . . . . . .
. 0.001%
Magnesium (Mg) . . . . . . . 5 ppm
Heavy metals (as Pb) . . . . 5 ppm
Iron (Fe) . . . . . . . .
. . . . .
2 ppm
Phosphate (PO4). . . . . .
. 2 ppm
Sulfate (SO4). . . . . . . . ... 0.002%
Ammonium Chloride manufacturers:
MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD,
CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950,
23774610, 23723564. FAX: 91-22-23728264
e-mail:
info@mubychem.com
Cell Call
to Anmol: +91-9821870100
USA & Canadian Customers may Call
773-829-5811
Copyright and Usual Disclaimer is
Applicable.
Last updated
07 December, 2011
----------------
| Old Spice: Manufacturing since more than Three Decades: | |||
|
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals |
|||
| Borax; Sodium Borate | |||
| Calcium Chloride | |||
| Chromic Chloride | |||
| Manganese Chloride | Manganese Sulfate | Methylene Blue | Potassium Chloride |
| Sodium Acetate | Sodium Hydroxide | Sodium Thiosulfate | |
| Zinc Chloride | |||
|
Pharmaceuticals & Food Grade, IP BP USP FCC ACS Gr. of Chemicals mfd. by Anmol Chemicals |
|||
| Sodium Citrate | Titanium Dioxide | ||
| Zinc Carbonate | |||
|
|
|||
Ammonium Chloride IP NH4Cl BP NH4CLUSP Ammonium Chloride Manufacturers NH4Cl AR LR ACS NH4Cl Battery Grade NH4Cl Pellets Tablets NH4Cl FCC, Food grade NH4Cl Anti Caking Grade
Global or International Ammonium Chloride Pure BP USP FCC Food Grade Commercial Suppliers, Exporters, Importers, Manufacturers
Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc.
----------------