Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance & Flavor chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer.
The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-14001, ISO-22000:2005, FSSC 22000; ISO OHSAS 18001; Kosher Certified; Halal Certified; HACCP, FSSAI. We offer Commercial Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
ISO9001 ISO14001 OHSAS18001 ISO 22000 HACCP FSSC22000 GMP fssai HACCP halal jkkosher allergen free
Bookmark this Web Site Email This Page Info to a Colleague or Yourself

 

Search our website here

Home --------- Contact

Chemical Products

Export to USA UAE Europe Africa Tanzania Kenya Egypt Turkey Jumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc. Packing Palletized and Shrink Wrapped; 25kg or 50kg or 55 lbs HDPE laminated bags with an extra HMHDP liner Drum Packing for better transportation Drum Packing & Palletized Liquid Chemical Export Import Air Freighting

Amino tris methylene phosphonic acid ATMP Phosphonate Manufacturers, SDS GHS MSDS Sheet

For SDS MSDS Sheet Click
SDS MSDS Sheet of Anti-scalant based on Amino tris methylene phosphonic acid ATMP Phosphonate Manufacturers

Spanish ATMP, ácido fosfónico del metileno de tris Amino

Amino tris methylene phosphonic acid
ATMP Phosphonate for Fracturing
Amino tris methylene phosphonic acid ATMP

In the USA, UAE, Iran Iraq, Kuwait, Saudi Arabia and other oil producing areas, several hundred chemical compounds are used in hydraulic fracturing also called fracking, fracing or frac. In some areas like UK only 'Non-Hazardous' chemicals are permitted for fracturing fluids by the Environment Agency. All chemicals have to be declared publicly and increasingly, food additive based chemicals are available to allow fracking to take place safely.

Mubychem is an internationally preferred source for Stimulation Chemicals and Hydraulic Fracturing Chemicals. We serve various oil and shale gas producing countries like USA UAE, Kuwait, Iran, Iraq, Saudi Arabia, UK, Europe India etc. We are never too far from your well-site with multiple 24/7 company owned or rented warehouses in the India, USA and across the globe. With customers in several countries, we sell almost all the fracturing chemicals.

Specifications of ATMP Phosphonate Amino tris (methylene phosphonic acid) CAS Number: 6419-19-8

Parameters Limits
Appearance Clear, Colorless to Pale Yellow
Active acid 48% min
Specific Gravity 1.30
Colour APHA (Hazen) 60 units max
Ca Sequestration 450 mg CaCO3/g min
Iron 10 ppm max
Chloride 2% max
pH value (1% solution) 2 max

ATMP or aminotris(methylenephosphonic acid) is a phosphonic acid with chemical formula N(CH2PO3H2)3. It has chelating properties. ATMP has better antiscale performance than that of polyphosphate through its excellent chelating ability, low threshold inhibition and lattice distortion process. It can prevent scale formation in water systems. ATMP is the phosphonate analog of nitrilotriacetic acid.

Manufacturers:

MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) 91-22-23770100, 23726950
Current Date Time in India GMT+5:30

e-mail: info@mubychem.com

USA & Canadian Customers may
e-mail: usa@mubychem.com
Call toll-free 1-844-682-9243 (1-844-MUBYCHEM)

Manufacturers india
Copyright and Usual Disclaimer is Applicable.
Last : 8 August, 2017

Shale Gas Hydraulic Fracturing Chemicals
Acetic Acid Solution Ammonium Persulfate or Persulphate
Acid Viscosifier Acid Emulsifier
ATMP Phosphonate, Amino tris (methylene phosphonic acid) Ammonium Bifluoride
Barium Sulfate Remover BHMT or BHMTPMPA Biocide Solution
Boron & Zirconium based Guar Cross Linker BME Iron Reducer or Dissolver
Calcium Chloride Anhydrous & Solution Cement Defoamer
Citric Acid Solution Clay Stabilizer
Corrosion Inhibitors DETA Phosphonate or DTPMP Phosphonate
Didecyl Dimethyl Ammonium Chloride Solution Diverting Agent
Encapsulated Citric Acid Encapsulated Gel Breaker
Fe46 Liquid Iron Control Blend Friction Reducer
Flow Back Aid, Water Recovery Surfactant Foam or Finofoam 810
Foam 418 Heavy Crude Defoamer Gel Sweep
Glycerin Solution Glutaraldehyde Solution
HP HT Lube Hydroxy ethylidene diphosphonic acid, HEDP phosphonate
Hydrogen Sulfide Scavenger Potassium Chloride
KI (Stabilised) & Initiator KCl Substitute or Potassium Chloride Substitute
Non Emulsifier Paraffin Dispersant
Potassium Hydroxy Ethylidene,1-Diphosphonic Acid, HEDP-Kx Phthalic Acid, EDTA, BPA based Diverting Agents
Scale Inhibitor Chemicals Sodium Chlorite Solution
Sodium Glutaraldehyde Bisulfite Bisulphite

Extended Release Solids - Scale Paraffin Asphaltene Inhibitor

Tetrakis Hydroxymethyl Phosphonium Sulfate THPS Xanthan Gum Slurry
Zinc Chloride  

Exporter & ImporterBy Air ExportsExporters & ImprotersAmino tris methylene phosphonic acid ATMP Manufacturers

Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.

Global or International Suppliers, Exporters, Importers, Manufacturers

I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again

B-2000 SDS MSDS Sheet

1. PRODUCT AND COMPANY IDENTIFICATION

Product Name: Mixture of ATMP Phosphonate and other ingredients
Relevant Uses: Oil & Gas Wells and Industrial Use.
Suppliers: As per letterhead.

2. HAZARDS IDENTIFICATION

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Metal Corrosion, Category 1
Eye Irritation, Category 2

Labeling according GHS USA & Regulation (EC) No 1272/2008

GHS Label Elements
GHSirritant
Irritant

GHS Label Elements
GHScorrosive
Corrosive

Signal Word: Warning

Hazard Statements:
H290: May cause corrosion to metals
H319: Causes eye Irritation

Precautionary Statements:
P234 Keep only in original container.
P264 Wash … thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338 If IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P315: Get immediate medical advice/attention.
P336: Thaw frosted parts with lukewarm water. Do not rub affected areas.
P337+P313 If eye irritation persists: get medical advice/attention.
P406 Store in corrosive resistant/... container with a resistant inner liner.
P390 Absorb spillage to prevent material damage.
P403: Store in a well ventilated place.

Carcinogenicity: This product (or any component in a concentration of 0.1% or greater) is not listed by NTP, IARC, OSHA OR THE DEPARTMENT OF THE ENVIRONMENT as a carcinogen.

3. COMPOSITION / INFORMATION ON INGREDIENTS

The composition of this mixture may be proprietary information. In the event of a medical emergency, compositional information will be provided to a physician or a nurse.
This product is hazardous as defined in 29 CFR 1910.1200. Based on the following composition:

Chemical Name---------- Wt. % -- CAS #
Amino tris (methylene-
phosphonic acid) ------ 48-52 -- 6419-19-8
Phosphonic acid ------- <4    -- 13598-36-2
Phosphoric Acid ------- <1.5% -- 7664-38-2

Phosphoric Acid
OSHA PEL
TWA & STEL
ACGIH TLV
TWA & STEL
NIOSH IDLH
1& 3 mg/m3
1 & 3 mg/m3
1000 mg/m3

COMMENTS:
Recommended levels permissible exposure according to the Administration of Occupational Safety & Health Administration (OSHA) listed above may reflect the level or levels in 1989 and revised in subsequent regulatory activity. Although the 1989 levels have since been vacated by the 11th Circuit Court Petitions, we recommend that exposure levels below are observed as reasonable worker protection.

4. FIRST AID MEASURES

Always seek medical attention after first aid measures are provided.

Eyes: Flush with water for at least 15 minutes. Provide medical assistance.
Skin: Remove contaminated clothes and rinse skin with plenty of water or shower.
Ingestion: Do NOT induce vomiting. If the person is conscious, give milk or water to dilute stomach contents. Repose. Medical attention. Do not attempt to give anything by mouth to an unconscious person.
If spontaneous vomiting occurs, keep head below hips to prevent aspiration and monitor respiration if there is difficulty.
Inhalation: If adverse exposure to vapors and / or aerosols, immediately remove the affected person from exposure and get immediate medical assistance victim. If breathing is difficult, give oxygen. If stops breathing, give artificial respiration

5. FIRE FIGHTING MEASURES

Flash Point: Inflammable - Aqueous Solution
Flammable Limits: Not applicable
Temp. Auto Ignition: Not applicable
Fire Fighting: Material will not burn. Containers can build up pressure if exposed to heat (fire). Use water spray to cool fire exposed surfaces and to protect personnel.
Fire Fighting Equipment: As in any fire, wear self-contained breathing apparatus pressure-demand (NIOSH approved or equivalent) and full protective gear.

6. ACCIDENTAL RELEASE MEASURES OR LOSSES

Water Spill: Prevent additional discharge of material, if possible without danger. Warn occupants and downstream and danger areas downwind of corrosive release and ask everyone to stay away. Since this material sinks and is soluble, probably not recoverable. Notify authorities.
Land Spill: Prevent additional discharge of material, if possible without danger. Warn occupants and areas downwind of the dangers of releasing corrosive and ask everyone to stay away. For small spills implement cleanup procedures. For large spills, proceed with cleaning procedures and, if in public area, advise the authorities.
Contain spilled liquid with sand or earth. Recover by pumping or with suitable absorbent. Recycle or eliminate regulations of recovered materials in accordance with federal, state and local laws.

7. HANDLING AND STORAGE

Handling: Keep container closed. Open and handle container with care. Store in cool, well ventilated place away from incompatible materials.
DO NOT pressurize, cut, heat, or weld containers. Empty containers may contain product residue.
DO NOT reuse empty containers without commercial cleaning or reconditioning.
Storage: Corrosive to most metals including carbon steel, aluminum alloys and copper and copper alloys.
Temperature of Storage: Environmental
Storage Pressure: Atmospheric

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Engineering Controls: Ventilation should be provided to control exposure of workers and prevent health risks, and if necessary to reduce, prevent and control the generation of aerosols.
PERSONAL PROTECTIVE EQUIPMENT
Eyes & Face: Chemical goggles and face shield is required.
Skin: In case of contact could occur, use protective gloves and long sleeves.
Respiratory: Should exposure by inhalation may occur and engineering, work practices or other means of exposure reduction are not adequate, respirators will be needed.
Other Precautions: Safety shower and eyewash station are necessary in the area of use.

9. PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Liquid
Odor: Odorless
Appearance: Clear
Color: Pale yellow
pH: <2
Percent Volatile: 50 @ 77 ° F
Boiling Point: 226 ° F 108 ° C
Freezing Point: <10 ° F 12 ° C
Solubility in Water: Soluble
Evaporation Rate: <1 (n-butyl acetate = 1)
Density: 11.07 to 11.09 lbs / gal
Specific Gravity: 1.329 - 1331--77 ° F

10. STABILITY AND REACTIVITY

Stable: Yes
Hazardous Polymerization: Will not occur.
Conditions to Avoid: Contact with common metals produces flammable hydrogen gas.
Hazardous Decomposition Products: phosphines, CO, CO2 and nitrogen oxides
Incompatible Materials: Avoid contact with strong alkalis, lead to violent reactions with the evolution of heat. Avoid contact with metal salts of sulfides and sulfites, which could release toxic gases. Also avoid contact with strong oxidizing agents.

11. TOXICOLOGICAL INFO

Not available.

12. ECOLOGICAL INFORMATION

Environmental Toxicity:
Study results of similar item as represented by this MSDS material is as follows:
96 Hr Cl50 sunfish (Lepomis macrochirus)> 330 mg / l BOD5 = 150,000 mg/l
96 Hr LC50 Rainbow trout (Oncorhynchus mykiss)> 330 mg / l COD = 553,000 mg/l
48 Hr EC50 Water flea (Daphnia Magna) = 297 mg/l
Bioconcentration by Zahn-Wellens (OECD 3026) = 17% after 28 days

13. DISPOSAL

Empty Container: "Empty" containers retain product residue (liquid and / or vapor) and can be dangerous. Empty drums should be completely drained, properly cover and send immediately to a drum reconditioner or should duly divest.
RCRA / EPA Waste Information: Products discarded as sold, is considered a characteristic of hazardous waste, RCRA and that meets the definition and characteristics of corrosivity (designated D002).
General Comments: Discarded products, as sold, is considered a hazardous waste under RCRA. This material must be disposed of in accordance with local, state, and federal laws that allow the treatment of hazardous chemical waste.

14. TRANSPORT INFORMATION

DOT USA & ADR/RID
Proper Shipping Name: Corrosive liquid acidic, organic, NOS
Technical Name: Contains Amino tris (methylene phosphonic acid)
Class ADR / RID: 8
UN / NA Number: 3265
Packaging: II

15. REGULATORY INFO

UNITED STATES
SARA Title III (Superfund Amendments and Reauthorization Act)
311/312 Hazard Category: Acute Health, Reactive
Fire: No Acute: Yes Chronic: No
313 Reportable Ingredients: This product doesn't contain Reportable Ingredients according to Section 313.
CERCLA (COMPREHENSIVE RESPONSE, COMPENSATION, AND LIABILITY ACT)
CERCLA Regulatory: If this product is accidentally spilled, is not subject to special notice under requirements of Comprehensive Environmental Requirements of the Response, Compensation, and Liability Act (CERCLA). Recommend contacting local authorites required to notify whether locally.
TSCA (Toxic Substances Control)
TSCA: All components of this product are listed on the TSCA inventoy or are exempt from the TSCA inventory requirements.
RCRA Status: Product discarded as sold, would be considered by RCRA as Charateristics of hazardous waste, as it meets the definition and characteristics of corosividad (designated D002).

European/International Regulations European Labeling in Accordance with EC Directives
H290 = May cause corrosion to metals
H319 = Causes eye Irritation
Xi = Irritant
C = Corrosive,
R36/38 - Irritating to eyes and skin.
R35 - Causes severe burns.

16. OTHER INFORMATION

Disclaimer:
*************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
*************************