Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance & Flavor chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-22000:2005; Kosher Certified; Halal Certified; HACCP FSSAI. We offer Commercial Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
Bookmark this Web Site Email This Page Info to a Colleague or Yourself
Search our website here
KCl Substitute or Potassium Chloride Substitute Manufacturers, SDS MSDS Sheet
For MSDS Sheet Click
MSDS Sheet of KCl Substitute or Potassium Chloride Substitute Manufacturers
Spanish KCl cloruro de potasio sustituto
In the USA, UAE, Iran Iraq, Kuwait, Saudi Arabia and other oil producing areas, several hundred chemical compounds are used in hydraulic fracturing also called fracking, fracing or frac. In some areas like UK only 'Non-Hazardous' chemicals are permitted for fracturing fluids by the Environment Agency. All chemicals have to be declared publicly and increasingly, food additive based chemicals are available to allow fracking to take place safely.
Mubychem is an internationally preferred source for Stimulation Chemicals and Hydraulic Fracturing Chemicals. We serve various oil and shale gas producing countries like USA UAE, Kuwait, Iran, Iraq, Saudi Arabia, UK, Europe India etc. We are never too far from your well-site with multiple 24/7 company owned or rented warehouses in the India, USA and across the globe. With customers in several countries, we sell almost all the fracturing chemicals.
In general, most of all petroleum reservoirs contain clay/shale minerals and it is of importance to protect the water sensitive clays from becoming a damaging threat to permeability via swelling or migration. These clays are trapped into the reservoir matrix and when exposed to water. To a treatment fluid without protection swelling (plugging pores) and migrating-dispersing throughout the reservoir happens, resulting in production loss.
KCl-Sub-64™ is an excellent KCl Substitute that works as a Clay Stabilizer by inhibiting clay swellings and mitigation. It performance is guaranteed by exemplary results in Capillary Suction Tests and Roller Oven Testing.
KCL-SUB-64™ is a liquid product designed specifically for use as a replacement for solid potassium chloride (KCl). KCL-SUB-64™ offers superior performance at a lower cost -- without the handling, mixing and disposal problems associated with bag KCl. Because KCL-SUB-64™ is non-surface active, it does not effect wet-ability, create foaming problems, or cause emulsions. KCL-SUB-64™ is compatible with all known water based frac fluids, crosslinkers and breakers. It does not adversely affect fluid pH. The use of KCL-SUB-64™ on the fly can eliminate premixing and leftover saltwater disposal problems.
Color: Clear, colorless
Solubility: Water, acid, brine
Density: 8.5 lbs/US gallons or 1.02 gm/cc.
Charge: Cationic Flash Point: None
KCL-SUB-64™ should be used at 4.0gal per 1000 gallon of fluid where 2% KCl has been employed. More or less can be used, depending on the clay type and content of the specific zone in question. KCL-SUB-64™ is bio-degradable.
KCL-SUB-64™ is compatible with cationic and nonionic additives. A compatibility test is advised before use with anionic and amphoteric additives.
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) 91-22-23770100, 23726950
Current Date Time in India GMT+5:30
USA & Canadian Customers may
Call toll-free 1-844-682-9243 (1-844-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last 17 May, 2017
Shale Gas Hydraulic Fracturing Chemicals Acetic Acid Solution Ammonium Persulfate or Persulphate Acid Viscosifier Acid Emulsifier ATMP Phosphonate, Amino tris (methylene phosphonic acid) Ammonium Bifluoride Barium Sulfate Remover BHMT or BHMTPMPA Biocide Solution Boron & Zirconium based Guar Cross Linker BME Iron Reducer or Dissolver Calcium Chloride Anhydrous & Solution Cement Defoamer Citric Acid Solution Clay Stabilizer Corrosion Inhibitors DETA Phosphonate or DTPMP Phosphonate Didecyl Dimethyl Ammonium Chloride Solution Diverting Agent Encapsulated Citric Acid Encapsulated Gel Breaker Fe46 Liquid Iron Control Blend Flow Back Aid, Water Recovery Surfactant Foam or Finofoam 810 Foam 418 Heavy Crude Defoamer Friction Reducer Glycerin Solution Glutaraldehyde Solution HP HT Lube Hydroxy ethylidene diphosphonic acid, HEDP phosphonate Hydrogen Sulfide Scavenger Potassium Chloride KI (Stabilised) & Initiator KCl Substitute or Potassium Chloride Substitute Non Emulsifier Paraffin Dispersant Potassium Hydroxy Ethylidene,1-Diphosphonic Acid, HEDP-Kx Phthalic Acid, EDTA, BPA based Diverting Agents Scale Inhibitor Chemicals Sodium Chlorite Solution Sodium Glutaraldehyde Bisulfite Bisulphite Tetrakis Hydroxymethyl Phosphonium Sulfate THPS Xanthan Gum Slurry Zinc Chloride
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
KCl substitute SDS MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Synonyms: KCl Substitute, Potassium chloride Substitute
CAS No.: Mixture
Molecular Weight: It is a mixture
Chemical Formula: NA
Intended Use: Oil well fracturing and Industrial use.
Supplier: As per letterhead.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral Category 5
Skin irritation Category 2
Eye irritation Category 2A
Specific target organ toxicity – single exposure, Respiratory system Category 3
Labeling according GHS USA & Regulation (EC) No 1272/2008
GHS Label Elements
Signal Words: Warning
H303: May be harmful if swallowed.
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H335: May cause respiratory irritation.
P262: Do not get in eyes, on skin, or on clothing.
P264: Wash skin thoroughly after handling.
P 270: Do not eat, drink or smoke when using this product.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P330: Rinse mouth.
P301+312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P302+P352: IF ON SKIN: Wash with soap and water.
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P332+313: If skin irritation occurs: Get medical advice/attention.
P337+P313: If eye irritation persists: Get medical advice/ attention.
P360: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
P362: Take off contaminated clothing and wash before reuse.
P501: Dispose of contents/container to authorised agents.
Classification according to EU Directives 67/548/EEC or 1999/45/EC:
R Phrases: R36 Irritating to eyes.
S Phrases: S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
OSHA Hazards: None
HMIS (Perceived): Health hazard: 1, Flammability: 1, Physical hazards: 0
NFPA (Perceived): Health hazard: 1, Fire: 1, Reactivity Hazard: 0
3. Composition/Information on Ingredients
None of the components of this product are hazardous.
Ingredient: : Blend of Choline Chloride and Monovalent, Divalent and TriValent Salts.
Composition/specific chemical identities are withheld as a trade secret under the provisions of OSHA hazard communication standard 29 CFR 1910.1200
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.
Note to Physician: Symptomatic and supportive treatment is recommended.
5. Fire Fighting Measures
Auto-Ignition Temperature: NA.
Flash Points: NA.
Flammable Limits: NA.
Products of Combustion: Not available.
Explosion: Not considered to be an explosion hazard.
Fire Extinguishing Media: CO2, foam, dry chemicals. NOT RECOMMENDED: Do not use direct water jet on burning material.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. Containers can build up pressure if exposed to heat (fire). As in any fire, wear a self-contained breathing apparatus pressure-demand (MSHA/NIOSH approved or equivalent) and full protective gear. Apply alcohol-type foam or all purpose foam manufacturers recommended techniques for large fires. Use carbon dioxide or dry chemical for small fires. Use water spray to keep containers cool.
6. Accidental Release Measures
Small Spill: Avoid breathing mist. Ensure adequate ventilation. Use appropriate tools to put the spilled material in a convenient waste disposal container. Dispose of according to local and regional authority requirements.
Large Spill: Contain spilled material. Cover with an inert, non-combustible, inorganic absorbent material, or sweep up, and remove to an approved disposal container. Do not let the product enter drains. Use a shovel to put the material into a convenient waste disposal container.
7. Handling and Storage
Do not breathe mist. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. Do not drink, eat or smoke while handling. Respect good personal hygiene.
Avoid contact with skin and eyes. Avoid formation of mist and aerosols. Wash hands thoroughly after handling. Provide appropriate exhaust ventilation. If you feel unwell, seek medical attention.
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Keep away from ignition sources and naked flame.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. Physical and Chemical Properties
Appearance: KCl Substitute, Potassium chloride Substitute is colorless to yellow.
Solubility: It is soluble in water.
pH: 5.0 - 9 at 10% solution at 25C (77F)
Density: 1.05 to 1.1 g/cm3
% Volatiles by volume @ 21C (70F): 0
Boiling Point: > 212F
Melting Point: <50F.
10. Stability and Reactivity
Stability: It is stable under ordinary conditions of use and storage. Avoid contact with strong acids, alkali or oxidizing agents..
Hazardous Decomposition Products: It emits toxic fumes and carbon monoxide when heated to decomposition. It may form carbon dioxide and hydrogen chloride at elevated temperatures.
Hazardous Polymerization: Will not occur.
Incompatibilities: Avoid contact with strong acids, alkali or oxidizing agents..
Conditions to Avoid: Incompatibles.
11. Toxicological Information
Routes of Entry: Inhalation. Ingestion.
Toxicity to Animals: LD50: Not available. LC50: Not available.
Special Remarks on Toxicity to Animals: Not available.
Carcinogenic Effects: Not available.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
12. Ecological Information
Environmental Fate: Based on available information the product will not bio accumulate.
Environmental Toxicity: The material is not considered as environmental hazard.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements. Small amounts of this material may be suitable for sanitary sewer or trash disposal.
14. Transport Information
DOT & ADR/RID: Not regulated as dangerous goods.
IMDG: Not dangerous goods
IATA: Not dangerous goods
15. Regulatory Information
OSHA Hazards: None
SARA 313 Components: This material does not contain any chemical components with known CAS numbers that exceed the threshold reporting levels.
Section 16 - Additional Information
European/International Regulations European Labeling in Accordance with EC Directives:
H303 = May be harmful if swallowed.
H315 = Causes skin irritation.
H319 = Causes serious eye irritation.
H335 = May cause respiratory irritation.
Xi = Irritant
R36 = Irritating to eyes.
DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.