Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance & Flavor chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-14001, ISO-22000:2005, FSSC 22000; ISO OHSAS 18001; Kosher Certified; Halal Certified; HACCP, FSSAI. We offer Commercial Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
Bookmark this Web Site Email This Page Info to a Colleague or Yourself
Search our website here
Boron & Zirconium based Guar Crosslinker Manufacturers
For MSDS Sheet Click
MSDS Sheet of Crosslinker Manufacturers
Spanish Vinculador de boro y circonio Guar Cruz
In the USA, UAE, Iran Iraq, Kuwait, Saudi Arabia and other oil producing areas, several hundred chemical compounds are used in hydraulic fracturing also called fracking, fracing or frac. In some areas like UK only 'Non-Hazardous' chemicals are permitted for fracturing fluids by the Environment Agency. All chemicals have to be declared publicly and increasingly, food additive based chemicals are available to allow fracking to take place safely.
Mubychem is an internationally preferred source for Stimulation Chemicals and Hydraulic Fracturing Chemicals. We serve various oil and shale gas producing countries like USA UAE, Kuwait, Iran, Iraq, Saudi Arabia, UK, Europe India etc. We are never too far from your well-site with multiple 24/7 company owned or rented warehouses in the India, USA and across the globe. With customers in several countries, we sell almost all the fracturing chemicals.
>4% Boron, pH Buffered, Borate based, Green Cross Linker
X-Link 4BBG high Boron content buffered liquid Cross Linker. It is a green, glycol-free solution for cross linking guar, guar derivatives and other carbohydrate based fracturing fluids.
X-Link 4BBG offers convenience and flexibility in the creation & use of high viscosity cross linked gels which potentially increase fracture width and allow higher proppant loading.
X-Link 4BBG can be added on the fly, typical loading rates are 1 to 3 gpt based on fluid properties desired.
TYPICAL PHYSICAL PROPERTIES
Parameter Specification Appearance Clear Liquid Odor None Boron Content 4% Specific Gravity 1.3 to 1.4 pH 12.8 to 13 .8 Pour Point 20 deg F
Drums, Totes, and Bulk.
We also offer Zirconium based crosslinker solution, emulsion, granules, noodles and powder.
We also offer Biodegradable Zirconium based Cross Linker. It is offered as solvent based liquid and as granular delayed and temperature based release encapsulated.
We can tailor make the product for time release of say 5 minutes, 10 minutes or temperature at which it may release.
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) 91-22-23770100, 23726950
Current Date Time in India GMT+5:30
USA & Canadian Customers may
Call toll-free 1-844-682-9243 (1-844-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last : 14 August, 2017
Shale Gas Hydraulic Fracturing Chemicals Acetic Acid Solution Ammonium Persulfate or Persulphate Acid Viscosifier Acid Emulsifier ATMP Phosphonate, Amino tris (methylene phosphonic acid) Ammonium Bifluoride Barium Sulfate Remover BHMT or BHMTPMPA Biocide Solution Boron & Zirconium based Guar Cross Linker BME Iron Reducer or Dissolver Calcium Chloride Anhydrous & Solution Cement Defoamer Citric Acid Solution Clay Stabilizer Corrosion Inhibitors DETA Phosphonate or DTPMP Phosphonate Didecyl Dimethyl Ammonium Chloride Solution Diverting Agent Encapsulated Citric Acid Encapsulated Gel Breaker Fe46 Liquid Iron Control Blend Friction Reducer Flow Back Aid, Water Recovery Surfactant Foam or Finofoam 810 Foam 418 Heavy Crude Defoamer Gel Sweep Glycerin Solution Glutaraldehyde Solution HP HT Lube Hydroxy ethylidene diphosphonic acid, HEDP phosphonate Hydrogen Sulfide Scavenger Potassium Chloride KI (Stabilised) & Initiator KCl Substitute or Potassium Chloride Substitute Non Emulsifier Paraffin Dispersant Potassium Hydroxy Ethylidene,1-Diphosphonic Acid, HEDP-Kx Phthalic Acid, EDTA, BPA based Diverting Agents Scale Inhibitor Chemicals Sodium Chlorite Solution Sodium Glutaraldehyde Bisulfite Bisulphite Tetrakis Hydroxymethyl Phosphonium Sulfate THPS Xanthan Gum Slurry Zinc Chloride
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Cross Linker (BBG4 - Borate based) SDS GHS MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Product Name: Cross Linker (BG-4 - Borate based)
CAS No.: Mixture
Intended use: Fracturing and Industrial Manufacturing Use.
Supplier: As per letterhead.
2. Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Skin corrosion/irritation Category 1A, B, C
Reproductive toxicity Category 1A, 1B
Hazardous to the aquatic environment, acute hazard Category 3
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements
GHS Label Elements
Signal Words: Danger
H314: Causes severe skin burns and eye damage
H360: May damage fertility or the unborn child.
H402: Harmful to aquatic life
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash contaminated parts thoroughly after handling.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P281: Use personal protective equipment as required.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P362: Take off contaminated clothing and wash before reuse.
P301+330+331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+361+353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304+340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes.
P405: Store locked up.
P501: Dispose of contents/container in accordance with local/national regulation.
Classification according to EU Directives 67/548/EEC or 1999/45/EC:
C = Corrosive
R35 Causes severe burns.
R60 May impair fertility.
R61 May cause harm to the unborn child.
3. Composition/Information on Ingredients
Ingredient-1: Sodium Borate or Borax or Sodium Tetraborate Borates, Tetra, Sodium Salts
EINECS EC Number: 215-540-4
CAS No.: 1303-96-4 (Decahydrate)
Ingredient-2: Sodium Hydroxide Pellets
CAS No.: 1310-73-2
EINECS EC Number: 215-185-5
Percent: 15 - 40%
Ingredient-3--: Water and Non-hazardous additives.
4. First Aid Measures
Always seek medical attention after first aid measures are provided.
Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention if irritation occurs.
5. Fire Fighting Measures
Fire: Not considered to be a fire hazard.
Explosion: Not considered to be an explosion hazard.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Use means suitable for extinguishing surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Small Spill: For small spills use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to legal requirements.
Large Spill: Use a shovel to put into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to drain.
7. Handling and Storage
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
8. Exposure Controls/Personal Protection
Airborne Exposure Limits for Borax:
Sodium Tetraborate Decahydrate (1303-96-4)
USA ACGIH, ACGIH TWA (mg/m³), 2 mg/m³
USA ACGIH, ACGIH STEL (mg/m³), 6 mg/m³
Sodium borate USA (OSHA) TWA 10 mg/m3
Airborne Exposure Limits for Sodium Hydroxide:
USA ACGIH: 2 mg/m³ ACGIH Ceiling (mg/m³)
USA OSHA: 2 mg/m³ OSHA PEL (TWA) (mg/m³)
British Columbia: 2 mg/m³ OEL Ceiling (mg/m³)
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): If the exposure limit is exceeded and engineering controls are not feasible, a full face piece particulate respirator (NIOSH type N100 filters) may be worn for up to 50 times the exposure limit or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest. If oil particles (e.g. lubricants, cutting fluids. glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face piece positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
9. Physical and Chemical Properties
Appearance: Yellow/Brown Liquid
Flash Point: 160° C
Solubility in Water: Completely miscible
Specific Gravity: Approximately 1.3
10. Stability and Reactivity
Stability: It is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Toxic gases and vapors may be released if involved in a fire.
Hazardous Polymerization: Will not occur.
Incompatibilities: Acids, alkaloids, and metallic salts.
Conditions to Avoid: Incompatibles.
11. Toxicological Information
Borax: Oral rat LD50: 2660 mg/kg. Investigated as a mutagen, reproductive effector. Anhydrous: Investigated as a reproductive effector.
1350 mg/kg skin-rabbit LD50;
104-340 mg/kg oral-rat LD50;
40 mg/kg intra peritoneal-mouse
LD50; 500 mg/kg oral-rabbit LDLo
Tests on laboratory animals indicate material may produce adverse mutagenic effects.
Carcinogenic Effects: Not a reported carcinogen by IARC NTP ACGIH OSHA.
12. Ecological Information
Toxicity to fish for Borax: LC50 - Limanda: 74 mg/l - 96 h, EC50 Daphnia: 1085 mg/l
Toxicity to fish for Sodium Hydroxide:
LC50 - Gambusia affinis (Mosquito fish) - 125 mg/l - 96 h
LC50 - Oncorhynchus mykiss (rainbow trout) - 45,4 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates: Immobilization EC50 - Daphnia - 40,38 mg/l - 48 h
Environmental Fate: When released into the soil, this material may leach into groundwater.
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused Borax in accordance with federal, state and local requirements.
14. Transport Information
US DOT & ADR/RID:
U.S. DOT 49 CFR 172.101
BULK / NON BULK
Shipping Name Sodium Hydroxide solution
Hazard Class/Division 8
Identification No. UN1824
Packing Group PG II
15. Regulatory Information
TSCA INVENTORY: All components are listed in the inventory
SARA 302/304 STATUS: This product does not contain any components listed as Extremely Hazardous substances.
SARA 311/312 CLASSIFICATION: Sodium Hydroxide
HMIS (Perceived): Health Hazard: 3, Fire Hazard: 1, Reactivity: 1.
NFPA (Perceived): Health: 3, Flammability: 1, Reactivity: 1
16. Other Information
C = Corrosive,
R35 = Causes severe burns.
R60 = May impair fertility.
R61= May cause harm to the unborn child.
H314 = Causes severe skin burns and eye damage
H360 = May damage fertility or the unborn child.
H402 = Harmful to aquatic life
DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.