|
(FDA) GMP Approved ISO-22000:2005 Kosher Certified Halal Certified HACCP |
Mubychem Group, established in 1976, is the pioneer manufacturer of Zinc Chloride, Ammonium Chloride, Calcium Chloride, Potassium Chloride, Sodium Acetate, Sodium Thiosulphate, Potassium Carbonate, Pharmaceutical, Fragrance & Flavor chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India. |
For Translating this page in your language use this translation tool (Refresh if the tool is not seen). |
Potassium Carbonate BP Potassium Carbonate USP
Manufacturers
Anhydrous CAS No.: 584-08-7, Molecular Weight: 138.21, Chemical Formula: K2CO3
Buy Potassium
Carbonate; Door Delivery
For MSDS Sheet Click
MSDS of Potassium
Carbonate Manufacturers
Potassium Carbonate
Technical & Pure
Also IP BP Ph. Eur. USP ACS AR LR FCC Food Grades
British
Pharmacopoeia
Potassium
Carbonate BP
Potassium Carbonate BP
K2CO3
Action
and use
Excipient.
DEFINITION
Content
99.0 per
cent to 101.0 per cent (dried substance).
CHARACTERS
Appearance
White or
almost white granular powder, hygroscopic.
Solubility
Freely
soluble in water, practically insoluble in ethanol (96 per cent).
IDENTIFICATION
A. Dissolve
1 g in 10 ml of water. The solution is strongly alkaline.
B. 2 ml of
the solution prepared for identification test A gives the reaction of carbonates
and bicarbonates.
C. 1 ml of
the solution prepared for identification test A gives reaction of potassium.
TESTS
Solution S
Dissolve
10.0 g in 25 ml of distilled water. Slowly add 14 ml of hydrochloric
acid. When the
effervescence has ceased, boil for a few minutes. Allow to cool and dilute to 50
ml with distilled water.
Appearance of solution
Solution S
is not more opalescent than reference suspension and not more intensely coloured
than reference solution.
Chlorides
Maximum 100
ppm.
Sulphates
Maximum 100
ppm.
Calcium
Maximum 100
ppm.
Iron
Maximum 10
ppm.
Heavy
metals
Maximum 20
ppm.
Loss on
drying
Maximum 5.0
per cent, determined on 0.300 g by drying in an oven at 120-125 °C for 5 h.
ASSAY
Dissolve
0.500 g in 50 ml of carbon dioxide-free water. Carry out a potentiometric
titration, using 1 M hydrochloric acid . Read the volume added at the 2nd
point of inflexion.
1 ml of 1 M hydrochloric acid
is equivalent to 69.1 mg of K2CO3.
Potassium Carbonate USP
Potassium
Carbonate
K2CO3
(anhydrous) 138.21
Carbonic
acid, dipotassium salt.
Dipotassium
carbonate [584-08-7].
Sesquihydrate 165.23
Potassium Carbonate contains not less than 99.5 percent and not more than 100.5 percent of K2CO3, calculated on the dried basis.
Identification— It responds to the tests for
Potassium and for Carbonate.
Loss on
drying— Dry it at 180 for 4 hours: it loses not more than 0.5% of its
weight.
Insoluble substances— Dissolve 1 g in 20 mL of water: the solution is
complete, clear, and colorless.
Heavy
metals— Dissolve 4.0 g in 10 mL of water, add 15 mL of 3 N hydrochloric
acid, and heat to boiling. Add 1 drop of phenolphthalein TS, and neutralize with
1 N sodium hydroxide until the solution is faintly pink in color. Cool, and
dilute with water to 25 mL: the limit is 0.0005%.
Assay— Transfer the dried potassium carbonate obtained in the test for
Loss on
drying to a flask with the aid of 150 mL of water, add 4 drops of methyl
orange TS, and titrate with 1 N hydrochloric acid VS. Each mL of 1 N
hydrochloric acid is equivalent to 69.11 mg of K2CO3.
Potassium Carbonate FCC
K2CO3
Formula wt, anhydrous 138.21
K2CO3·1½H2O
Formula wt, hydrated 165.23
INS: 501(i)
CAS: [584-08-7]
DESCRIPTION
Potassium
Carbonate is anhydrous or contains 1.5 molecules of water of crystallization.
The anhydrous form occurs as a white, granular powder, and the hydrated form as
small, white, translucent crystals or granules. It is very deliquescent, and its
solutions are alkaline. One gram dissolves in 1 mL of water at 25° and in about
0.7 mL of boiling water. It is insoluble in alcohol.
Function: pH control.
REQUIREMENTS
Identification: A 1:10 aqueous solution gives positive tests for
Potassium and for Carbonate.
Assay: Not less than 99.0% and not more
than 100.5% of K2CO3 after drying.
Insoluble Substances: Passes test.
Lead: Not more than 2 mg/kg.
Loss on Drying Anhydrous:
Not more than 1%; Hydrated: Between 10.0% and 16.5%.
Potassium Carbonate, Anhydrous ACS
Reagent Chemicals
ACS Specifications
Potassium Carbonate, Anhydrous
K2CO3
Formula
Wt 138.21
CAS Number 584-08-7
REQUIREMENTS
Assay --------------------------- 
99.0%
K2CO3
MAXIMUM ALLOWABLE
Insoluble matter ........................... 0.01%
Chloride (as Cl) ........................... 0.003%
Nitrogen compounds (as N) ........ 0.001%
Phosphate (PO4) ........................ 0.001%
Silica (SiO2) ............................... 0.005%
Sulfur compounds (as SO4) ........ 0.004%
Ammonium hydroxide precipitate 0.01%
Heavy metals (as Pb) .................. 5 ppm
Iron (Fe) .................................... 5 ppm
Calcium ..................................... 0.005%
Magnesium ................................ 0.002%
Sodium (Na) ............................. 0.02%
Potassium Carbonate ACS Sesquihydrate
Reagent Chemicals
ACS Specifications
Potassium Carbonate Sesquihydrate
K2CO3 . 1.5H2O
Formula Wt 165.23
CAS Number 6381-79-9
REQUIREMENTS
Assay: 98.5-101.0% K2CO3 . 1.5H2O
Loss on heating at 285C: 14.0-16.5%
MAXIMUM ALLOWABLE
Insoluble matter ..........................0.01%
Chloride (as Cl)
......................... 0.003%
Nitrogen compounds (as N) ....... 0.001%
Phosphate (PO4)
....................... 0.001%
Silica (SiO2)
.............................. 0.005%
Sulfur compounds (as SO4) ....... 0.004%
Ammonium hydroxide precipitate 0.01%
Heavy metals (as Pb)
................. 5 ppm
Iron (Fe) .................................... 5 ppm
Calcium (Ca)
............................. 0.005%
Magnesium (Mg)
....................... 0.002%
Sodium (Na) ............................. 0.02%
Potassium Carbonate BP
Potassium Carbonate USP
Potassium Carbonate manufacturers:
MUBY CHEMICALS
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI
400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610,
23723564. FAX: 91-22-23728264
e-mail:
info@mubychem.com
Cell Call
to Anmol: +91-9821870100
USA & Canadian Customers may Call
773-829-5811
Copyright and Usual Disclaimer is
Applicable.
Last updated
10 December, 2011
| Old Spice: Manufacturing since more than Three Decades: | |||
|
Best Selling IP BP USP FCC ACS Grades of Chemicals by Anmol Chemicals |
|||
| Borax; Sodium Borate | |||
| Calcium Chloride | |||
| Chromic Chloride | |||
| Manganese Chloride | Manganese Sulfate | Methylene Blue | Potassium Chloride |
| Sodium Acetate | Sodium Hydroxide | Sodium Thiosulfate | |
| Zinc Chloride | |||
|
Pharmaceuticals & Food Grade, IP BP USP FCC ACS Gr. of Chemicals mfd. by Anmol Chemicals |
|||
|
|
|||
| Sodium Citrate | Titanium Dioxide | ||
| Zinc Carbonate | |||
Global or International Potassium Carbonate Suppliers, Exporters, Importers, Manufacturers
Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc.
----------------
If you want your work to be done well, then go to a busy man.
The other one has no time.