Dried Aluminium Phosphate Pure and BP Grade Manufacturers, with SDS GHS MSDS Sheet

Supplier, Manufacturer, Exporter of Dried Aluminium Phosphate, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Peru, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc.

The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer.

The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals
ISO9001 ISO IEC 17025 ISO14001 ISO 45001 ISO 22000 HACCP FSSC22000 HACCP GMP Good Laboratory fssai HACCP halal jkkosher allergen free Gluten Free Reach

Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself

Search our website here:

Home --------- Contact

Chemical Products

Export to USA UAE Europe Africa Tanzania Kenya Egypt Turkey Jumbo Packing; Exports to USA UAE Europe Africa Tanzania Kenya Uganda Egypt Turkey Brazil Chile Argentina Dubai etc. Packing Palletized and Shrink Wrapped; 25kg or 50kg or 55 lbs HDPE laminated bags with an extra HMHDP liner Drum Packing for better transportation Drum Packing & Palletized Liquid Chemical Export Import Air Freighting

Dried Aluminium Phosphate: CAS Number: 7784-30-7, EINECS EC Number: 232-056-9, Molecular Formula: AlO4P, Molecular Weight: 121.95, HS Code ---**

How big is your requirement or how small
We serve it all.

Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for Dried Aluminium Phosphate.

For SDS MSDS Sheet Click
SDS MSDS Sheet of Dried Aluminium Phosphate Manufacturers

Spanish Fabricantes de fosfato de aluminio seco

Portuguese fosfato de alumínio seco fabricantes

Dried Aluminium Phosphate
Pure, BP Grade Suppliers
Dried Aluminium Phosphate

Aluminium phosphate (AlPO4) is a chemical compound. The anhydrous form is found in nature as the mineral berlinite. Many synthetic forms of anhydrous aluminium phosphate are known.

Dried Aluminium Phosphate
Hydrated Aluminium Phosphate, Ph Eur monograph
AlPO4,xH2O --- 122.0 --- CAS 7784-30-7 (anhydrous)
Action and use: Antacid.

DEFINITION
Content: 94.0 per cent to 102.0 per cent of AlPO4 ignited substance).

CHARACTERS
Appearance: White or almost white powder.
Solubility: Very slightly soluble in water, practically insoluble in alcohol. It dissolves in dilute solutions of mineral acids and alkali hydroxides.

IDENTIFICATION
A. Solution S (see Tests) gives reaction (b) of phosphates.
B. Solution S gives the reaction of aluminium.

TESTS
Solution S: Dissolve 2.00 g in dilute hydrochloric acid R and dilute to 100 ml with the same acid.
Appearance of solution: Solution S is clear and colourless.
pH: 5.5 to 7.2
Shake 4.0 g with carbon dioxide-free water and dilute to 100 ml with the same solvent.
Chlorides: Maximum 1.3 per cent.
Soluble phosphates: Maximum 1.0 per cent, calculated as PO4.
Sulphates: Maximum 0.6 per cent.
Arsenic: Maximum 1 ppm.
Heavy metals: Maximum 20 ppm.
Loss on ignition: 10.0 per cent to 20.0 per cent, determined on 1.000 g at 800 ± 50C.
Neutralising capacity: Add 0.50 g to 30 ml of 0.1 M hydrochloric acid previously heated to 37C and maintain at this temperature for 15 min while stirring. The pH of the mixture after 15 min at 37C is 2.0 to 2.5.

ASSAY
Dissolve 0.400 g in 10 ml of dilute hydrochloric acid and dilute to 100.0 ml with water. To 10.0 ml of the solution, add 10.0 ml of 0.1 M sodium edetate and 30 ml of a mixture of equal volumes of ammonium acetate solution and dilute acetic acid. Boil for 3 min, then cool. Add 25 ml of alcohol and 1 ml of a freshly prepared 0.25 g/l solution of dithizone in alcohol. Titrate the excess of sodium edetate with 0.1 M zinc sulphate until the colour changes to pink. 1 ml of 0.1 M sodium edetate is equivalent to 12.20 mg of AlPO4.

STORAGE
In an airtight container.

For Original Monographs of IP Indian Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.

We manufacture and supply as under:

Activated Alumina Aluminum Oxide

Aluminum Chloride Hexahydrate

Aluminium Chlorohydrate

Aluminum hydroxide

Aluminium Phosphate Gel or Aluminum Phosphate Gel

Aluminium Potassium Sulphate

Aluminium Glycnate

Aluminium Magnesium Silicate

Aluminum Monostearate

Dihydroxyaluminum Sodium Carbonate

Dihydroxyaluminum Aminoacetate

Dried Aluminium Phosphate

Potash  Alum

Aluminum Acetate.

Manufacturers Suppliers:

MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30

e-mail: info@mubychem.com

USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)

Manufacturers india
Copyright and Usual Disclaimer is Applicable.
Last 15 March, 2024

List of All the IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals
Best Seller Fast Moving IP, BP, EP, Ph Eur, USP NF, JP, FCC Food, Analytical Reagent Grades of Chemicals Ex-stock Items
Aluminum Chloride Hexahydrate Aluminium Potassium Sulphate
Ammonium Bicarbonate Ammonium Carbonate
Ammonium Chloride Ammonium Persulfate
Borax; Sodium Borate Boric Acid
Calcium Chloride Calcium Saccharate
Calcium Sulfate Carbamide Peroxide
Chromic Chloride Cupric or Copper Chloride
Ferric Chloride Hexahydrate Fumaric Acid
Glacial Acetic Acid Lactobionic Acid
Magnesium Chloride Magnesium Sulfate
Manganese Chloride Manganese Sulfate
Potassium Bromide Potassium Chloride
Potassium Hydroxide Pellets Potassium Nitrate
Propylene Carbonate Potassium Monopersulfate
Selenious acid Sodium Acetate
Sodium Bromate Sodium Diacetate
Sodium Formaldehyde Bisulfite Sodium Lactobionate
Sodium Thiosulfate Zinc Chloride

Exporter & Importer By Air Exports Exporters & Improters Dried Aluminium Phosphate Manufacturers

Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.

Global or International Suppliers, Exporters, Importers, Manufacturers

I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again

Dried Aluminum Phosphate SDS, Safety Data Sheet
Dried Aluminium Phosphate MSDS Sheet, Material Safety Data Sheet
17-Oct-20

1. Product Identification

Product Name & Other Names: Dried Aluminium Phosphate or Dried Aluminum Phosphate
CAS No.: 7784-30-7
EINECS EC Number: 232-056-9
Molecular Weight: 121.95
Chemical Formula: AlO4P
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008:

Skin corrosion/irritation Category 1A, B, C

Labeling according to GHS & Regulation (EC) No 1272/2008

GHS Label Elements
Corrosive
Corrosive

Signal Words: Danger

Hazard statements:
H314: Causes severe skin burns and eye damage.

Precautionary statements:
P234: Keep only in original container.
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P264: Wash … thoroughly after handling.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P362: Take off contaminated clothing and wash before reuse.
P301+330+331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+361+353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+351+338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
P404: Store in a closed container.
P405: Store locked up.
P501: Dispose of contents/container to authorized agents only.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbol:
C Corrosive
Risk Phrase:
R35 Causes severe burns.
R41 Risk of serious damage to eyes.

3. Composition/Information on Ingredients

Product Name & Other Names: Dried Aluminium Phosphate or Dried Aluminum Phosphate
CAS No.: 7784-30-7
EINECS EC Number: 232-056-9

4. First Aid Measures

Always seek medical advice after the first aid treatment.

Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: If swallowed, DO NOT INDUCE VOMITING. Give large quantities of water. Never give anything by mouth to an unconscious person. Get medical attention immediately.
Skin Contact: Wipe off excess material from skin then immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention.

5. Fire Fighting Measures

Fire: Not considered to be a fire hazard.
Explosion: Not considered to be an explosion hazard.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Hazardous Combustion Products: Forms aluminum oxide, phosphorous oxides.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.

6. Accidental Release Measures

Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage:
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to authority requirements.
Large Spill: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate as per law.

7. Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents and bases.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: USA - California Permissible Exposure Limits for Chemical Contaminants: 5 mg/m3 TWA.
Ventilation System:
A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved):
If the exposure limit is exceeded and engineering controls are not feasible, a half face piece particulate respirator (NIOSH type N95 or better filters) may be worn for up to ten times the exposure limit or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest. A full-face piece particulate respirator (NIOSH type N100 filters) may be worn up to 50 times the exposure limit, or the maximum use concentration specified by the appropriate regulatory agency, or respirator supplier, whichever is lowest. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face piece positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection:
Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
Eye Protection:
Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Dust deposits on floors and other surfaces may pick up moisture and cause the surfaces to become slippery and present safety hazards. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.

9. Physical and Chemical Properties

Appearance: It is colorless crystals or powder.
Odor: Odorless.
Odor threshold: Not available.
pH: Not available.
Relative density: around 2.56
Melting point/freezing point: Not available.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility(ies): Not available.
Viscosity: Not available.
Molecular Weight: 121.95
Chemical Formula: AlO4P

10. Stability and Reactivity

Stability: It is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Toxic and corrosive oxides of phosphorous may be formed when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Strong oxidizing agents and bases.
Conditions to Avoid: Heat and incompatibles.

11. Toxicological Information

LD50: > 5000 mg/kg (oral mouse).
LD50 Dermal - Rabbit - > 4,640 mg/kg(
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.

12. Ecological Information

Toxicity Data: No information found.
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state, and local requirements.

14. Transport Information

DOT USA ADR/RID Europe:
UN Number: 3260
Proper Shipping Name: Corrosive solid, acidic, inorganic, n.o.s. (Aluminium phosphate)
Transport Hazard Class: 8
Packaging Group: II
IMDG:
UN Number: 3260
Proper Shipping Name: Corrosive solid, acidic, inorganic, n.o.s. (Aluminium phosphate)
Transport Hazard Class: 8
Packaging Group: II
IATA:
UN Number: 3260
Proper Shipping Name: Corrosive solid, acidic, inorganic, n.o.s. (Aluminium phosphate)
Transport Hazard Class: 8
Packaging Group: II

15. Regulatory Information

USA:
USA California Proposition 65: No ingredient regulated by CA Prop 65 present.

16. Other Information

European Labeling in Accordance with EC Directives:
H314: Causes severe skin burns and eye damage.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbol:
C Corrosive
Risk Phrase:
R35 Causes severe burns.
R41 Risk of serious damage to eyes.

Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************