Sulphanilamide or Sulfanilamide or p-Aminobenzenesulphonamide Manufacturers, with SDS GHS MSDS Sheet |
Supplier, Manufacturer, Exporter of Sulphanilamide or Sulfanilamide or p-Aminobenzenesulphonamide, Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance Food & Flavor chemicals, Reagent Grade Chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. The participating units have one or more accreditations like FDA - cGMP and GLP approval, ISO-9001 Certified, "REACH" Registered, ISO-14001, ISO/IEC 17025, ISO-22000, FSSC 22000, ISO 45001, Kosher Certified, Halal Certified, HACCP, FSSAI. We offer Commercial Pure & IP BP EP Ph Eur USP NF JP FCC Food Grade Analytical Reagent Grades of Chemicals |
| Bookmark this Web Site -- or -- Email This Page Info to a Colleague or Yourself |
Search our website here:
--------- 
Sulphanilamide or Sulfanilamide or p-Aminobenzenesulphonamide CAS Number 63-74-1, EINECS EC Number: 200-563-4, Molecular Formula: C6H8N2O2S, Molecular Weight: 172.20, HS Code 29359090
How big is your requirement or how small
We serve it all.
Specifications, Safety Data Sheet, Manufacturing process details, Wholesale retail buy sell prices, Uses etc available on line in these pages for Sulphanilamide or Sulfanilamide or p-Aminobenzenesulphonamide.
For SDS MSDS Sheet Click
SDS MSDS Sheet of Sulphanilamide or Sulfanilamide or p-Aminobenzenesulphonamide Manufacturers
Sulfanilamide
Sulphanilamide or p-Aminobenzenesulphonamide Suppliers
Sulphanilamide, the active metabolite of the antibacterial dye Sulfamidochrysoidine, is a synthetic antibacterial agent also known as sulfa drugs. Sulfanilamide is a broad-spectrum antibiotic that effectively targets both Gram-positive and Gram-negative bacteria.
General Properties and Specifications of Sulphanilamide or Sulfanilamide or p-Aminobenzenesulfonamide:
Appearance: White to off white crystalline powder.
Solubility of 10% hot solution in Methanol: Clear or slight opalescent and colourless to almost colourless.
Solubility of 4% hot aq. solution: Clear colourless to almost colourless
Assay: 99% minimum.
Melting Point: 164.5C to 166C.
Loss on drying: 0.5% maximum.
Sulfated Ash: 0.1% maximum.
Chloride (CI): 0.01% maximum.
Sulfate (SO4): 0.02% maximum.
Iron (Fe): 0.001% maximum.
Heavy Metals (Pb): 0.002% maximum.
pH: about 5.8 to 6.1
Relative density: about 1.1
Melting point: 162C to 165C.
Solubility: Slightly soluble in water.
Storage: Refrigerator. Shipping may be ambient.
Sulfanilamide BP Ph Eur Grade Specifications:
C6H8N2O2S --- 172.2 CAS 63-74-1
Action and use: Sulfonamide antibacterial.
DEFINITION
Sulfanilamide contains not less than 99.0 per cent and not more than the equivalent of 101.0 per cent of 4-aminobenzenesulfonamide, calculated with reference to the dried substance.
CHARACTERS
White or yellowish-white crystals or fine powder, slightly soluble in water, freely soluble in acetone, sparingly soluble in alcohol, practically insoluble in methylene chloride. It dissolves in solutions of alkali hydroxides and in dilute mineral acids.
IDENTIFICATION
First identification: B
Second identification: A, C, D
A. Melting point: 164.5C to 166.0C.
B. Examine by infrared absorption spectrophotometry
C. Examine the chromatograms obtained in the test for related substances. The principal spot in the chromatogram obtained with test solution (a) is similar in position and size to the principal spot in the chromatogram obtained with reference solution (a).
D. Dissolve about 5 mg in 10 mL of 1 M hydrochloric acid. Dilute 1 mL of the solution to 10 mL with water. The solution, without further acidification, gives the reaction of primary aromatic amines.
Solution S: To 2.5 g add 50 mL of carbon dioxide-free water. Heat at about 70C for about 5 minutes. Cool in iced water for about 15 min and filter.
Acidity: To 20 mL of solution S add 0.1 mL of bromothymol blue solution. Not more than 0.2 mL of 0.1 M sodium hydroxide is required to change the colour of the indicator.
Related substances: To pass the test by thin-layer chromatography,
Loss on drying: Not more than 0.5 per cent, determined on 1.000 g by drying in an oven at 105C.
Sulfated ash: Not more than 0.1 per cent, determined on 1.0 g.
For Original Monographs of IP Indian Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.
We also manufacture and supply as under:
Dithiooxamide or Rubeanic Acid
Sulfanilic Acid or Sulphanilic Acid or 4-Aminobenzenesulfonic Acid.
Manufacturers:
MUBY CHEMICALS
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) +912223770100, +912223726950
Current Date Time in India GMT+5:30
e-mail: info@mubychem.com
USA, Canada, Mexico and other American
neighbouring buyers may
e-mail: us@mubychem.com
Call toll-free 1-877-682-9243 (1-877-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last
23 October, 2023
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Sulphanilamide or Sulfanilamide or p-Aminobenzenesulphonamide
SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet 02-Aug-23
1. PRODUCT DESCRIPTION
Product Name & Other Names: Sulphanilamide or Sulfanilamide or p-Aminobenzenesulphonamide.
CAS Number: 63-74-1
EINECS EC Number: 200-563-4
Molecular Formula: C6H8N2O2S
Molecular Weight: 172.20
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.
2. HAZARD IDENTIFICATION
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements None |
Signal Words: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.
Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Product Name & Other Names: Sulphanilamide or Sulfanilamide or p-Aminobenzenesulphonamide.
CAS Number: 63-74-1
EINECS EC Number: 200-563-4
4. FIRST AID MEASURES
Always get medical attention after the first aid is over.
Emergency and First Aid Procedures:
Eyes - Flush with water for at least 15 minutes, raising and lowering eyelids occasionally. Get medical attention if irritation persists.
Skin - Thoroughly wash exposed area for at least 15 minutes. Remove contaminated clothing. Launder contaminated clothing before reuse. Get medical attention if irritation persists.
Ingestion - If swallowed, if conscious, give plenty of water. Immediately call a physician.
Inhalation - Remove to fresh air. Give oxygen if breathing is difficult; give artificial respiration if breathing has stopped. Keep a person warm, quiet, and get medical attention.
5. FIREFIGHTING PROCEDURES
Extinguisher Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special Fire fighting Procedures: Firefighters should wear full protective equipment and NIOSH approved self-contained breathing apparatus.
Unusual Fire and Explosion Hazards: Heated to decomposition, however, toxic oxides of sulfur, oxides of nitrogen and oxides of carbon along with fumes may be evolved.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode. At high temperatures under fire conditions, it may produce toxic or irritating fumes.
6. SPILL OR LEAK PROCEDURES
Personal precautions, protective equipment, and emergency procedures: Ventilate area of spill. Avoid creating dust. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g., sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container.
7. SPECIAL PRECAUTIONS
Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Provide appropriate exhaust ventilation at places where dust is formed. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Do not leave the material container open. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like Strong oxidizing agents. Storage: Refrigerator. Shipping may be ambient.
8. SPECIAL PROTECTION INFORMATION
Exposure limits: This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies.
Respiratory Protection (Specify Type): None needed under normal conditions of use with adequate ventilation. NIOSH approved equipment should be worn if PELs are exceeded.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator may be worn. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full-face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.
Other Control Measures: Maintain good housekeeping in work area. Handle in accordance with good industrial hygiene and safety practice. Wash hands after handling.
9. PHYSICAL DATA
Physical State: White to off white crystalline powder.
Odor: Characteristic.
Odor threshold: Not available.
pH: about 5.8 to 6.1
Relative density: about 1.1
Melting Point: 162C to 165C.
Initial boiling point and boiling range: Not available.
Flash point: Not available.
Auto-ignition temperature: > 400C.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility in Water: Slightly soluble in water.
Viscosity: Not available.
Molecular Formula: C6H8N2O2S
Molecular Weight: 172.20
10. REACTIVITY DATA
Stability: Stable. When whirled up a dust explosion is possible. Light sensitive. Air sensitive
Conditions to Avoid: Dust generation, Incompatibles
Incompatibility (Materials to Avoid): Strong oxidizing agents.
Hazardous Decomposition Products: Oxides of sulfur, nitrogen, and carbon along with fumes.
Hazardous Polymerization: Will not occur.
11. TOXICITY DATA
Toxicity Data: LD50 Oral - Rat - 3.900 mg/kg.
Carcinogenicity: Not listed as carcinogen by IARC, ACGIH, OSHA and NTP.
Mutagenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.
12. ECOLOGICAL DATA
Toxicity to fish, daphnia, and other aquatic invertebrates: No data available.
Persistence and Degradability: Soluble in water. Persistence is unlikely based on information available.
Mobility: Likely to be mobile due to water solubility.
Results of PBT and vPvB assessment: No data available for assessment.
13. DISPOSAL INFORMATION
Waste Disposal Methods: Dispose in accordance with all applicable regulations.
14. TRANSPORT INFORMATION
DOT (USA) & ADT/RID Europe: Not dangerous goods.
IMDG & IATA: Not dangerous goods.
15. REGULATORY INFORMATION
USA Regulations:
SARA 311/312 Hazard Categories: Not hazardous. See section 2 for more information.
Disclaimer:
**************************
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.
**************************