Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance & Flavor chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-22000:2005; Kosher Certified; Halal Certified; HACCP FSSAI. We offer Commercial Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
Bookmark this Web Site Email This Page Info to a Colleague or Yourself
Search our website here
Bismuth Subcarbonate BP USP Grade Manufacturers, SDS GHS MSDS Sheet
Bismuth Subcarbonate: CAS Number: 5892-10-4, EINECS EC Number: 227-567-9, Molecular Formula: (BiO)2CO3, Molecular Weight: 509.97, HS Code ---**
For SDS MSDS Sheet Click
SDS MSDS Sheet of Bismuth Subcarbonate Manufacturers
Pure BP USP FCC Food Grade
Bismuth Subcarbonate BP Grade
Content: 80.0 per cent to 82.5 per cent of Bi (Ar 209.0) (dried substance).
Appearance: White or almost white powder.
Solubility: Practically insoluble in water and in ethanol (96 per cent). It dissolves with effervescence in mineral acids.
A. It gives the reaction of carbonates (2.3.1).
B. It gives the reactions of bismuth (2.3.1).
Solution S: Shake 5.0 g with 10 ml of water and add 20 ml of nitric acid. Heat to dissolve, cool and dilute to 100 ml with water.
Appearance of solution: Solution S is not more opalescent than reference suspension and is colourless.
Chlorides: Maximum 500 ppm.
Nitrates: Maximum 0.4 per cent.
Alkali and alkaline-earth metals: Maximum 1.0 per cent.
Arsenic: Maximum 5 ppm.
Copper: Maximum 50 ppm.
Lead: Maximum 20.0 ppm.
Silver: Maximum 25 ppm.
Loss on drying: Maximum 1.0 per cent, determined on 1.000 g by drying in an oven at 105C.
Bismuth Subcarbonate USP Grade
Bismuth Subcarbonate contains not less than 97.6 percent and not more than 100.7 percent of (BiO)2CO3, calculated on the dried basis.
Packaging and storage: Preserve in well-closed containers, protected from light.
Identification: It responds to the tests for Bismuth 1and for Carbonate.
Loss on drying: Dry it at 105 to constant weight: it loses not more than 1.0% of its weight.
Limit of alkalies and alkaline earths: 1.0%.
Limit of nitrate: 0.4%.
Limit of silver: 0.0025%.
Arsenic: To pass the test
Limit of copper: 0.005%.
Limit of lead: The limit is 0.002%.
For Original Monographs of IP Indian Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) 91-22-23770100, 23726950
Current Date Time in India GMT+5:30
USA & Canadian Customers may
Call toll-free 1-844-682-9243 (1-844-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last : 16 May, 2017
List of All the IP BP USP FCC ACS Grades of Chemicals Best Seller Fast Moving IP BP USP FCC ACS Grades of Chemicals Ex-stock Items Ammonium Bicarbonate Ammonium Bromide Ammonium Carbonate Ammonium Chloride Ammonium Molybdate Ammonium Sulfate Aluminum Chloride Benzyl Alcohol Borax; Sodium Borate Boric Acid Calcium Acetate Calcium Chloride Calcium Gluconate Calcium Hydroxide Calcium Lactate Calcium Oxide Calcium Saccharate Calcium Sulfate Chromic Chloride Citric Acid Calcium Citrate Copper Gluconate Copper Sulfate, Cupric Sulphate Cupric Chloride Ferrous Fumarate Ferrous Gluconate Fumaric Acid Ferrous Sulphate Ferric Sulfate Ferric Ammonium Citrate Ferric Chloride Gentian Violet Mannitol Magnesium Chloride Magnesium Gluconate Magnesium Lactate Dihydrate Magnesium Sulfate Magnesium Trisilicate Maleic Acid Malic Acid BP USP Manganese Gluconate Manganese Sulfate Manganese Chloride Methylene Blue Potassium Bromide Potassium Chloride Potassium Gluconate Potassium Bitartrate, Cream of Tartar Potassium Hydroxide Potassium Iodide Potassium Iodate Potassium Sorbate Sodium Acetate Sodium Bicarbonate Sodium Butyrate Sodium Caprylate Sodium Fluoride Sodium Gluconate Sodium Hydroxide Pellets Sodium Iodide Sodium Lactate Sodium Perborate Sodium Propionate Sodium Thiosulfate Sodium Sulfate Stannous Chloride Dihydrate Zinc Carbonate Zinc Chloride Zinc Gluconate All Product List
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Bismuth Subcarbonate SDS GHS MSDS Sheet, Material Safety Data Sheet
1. Product Identification
Synonyms: Bismuth(III) carbonate basic, Bismuth oxycarbonate
CAS No.: 5892-10-4
EINECS EC Number: 227-567-9
Molecular Weight: 509.97
Chemical Formula: (BiO)2CO3
Relevant Uses: Industrial use only.
Supplier: As per letterhead.
2: Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling according to GHS & Regulation (EC) No 1272/2008
GHS Label Elements
Signal Word: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
OSHA Hazards: No known OSHA hazards.
3. Composition/Information on Ingredients
Ingredient: Bismuth Subcarbonate
CAS No.: 5892-10-4
EINECS EC Number: 227-567-9
Percent: 95 - 100%
4. First Aid Measures
Always seek medical advice after the first aid treatment.
SKIN: Wash exposed area with soap and water.
EYES: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid.
INHALATION: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
INGESTION: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person.
5. Fire Fighting Measures
Fire: It is not considered to be a fire hazard.
Explosion: Not considered to be an explosion hazard.
Fire Extinguishing Media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Use means suitable for extinguishing surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Avoid dust formation. Avoid breathing vapours, mist or gas. Ventilate area of leak or spill. Wear appropriate personal protective equipment as specified in Section 8. Spills: Sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal.
7. Handling and Storage
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
8. Exposure Controls/Personal Protection
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Personal Protection: Safety glasses. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent Gloves.
Personal Protection in Case of a Large Spill:
Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product.
No specific OES assigned, however for dusts of any kind, ensure LTEL (8-hour TWA ref. period) level does not exceed 10 mg.m3 for total inhalable dust or 4 mg.m3 for respirable dust (or) as recommended in current edition of EH40. Consult local authorities for acceptable exposure limits.
9. Physical and Chemical Properties
Appearance: It is fine, light yellow powder.
Solubility: Insoluble in water.
Specific Gravity: 6.86
pH: > NA.
% Volatile by volume @ 21C (70F): 0
Boiling Point: NA.
Melting Point: NA.
10. Stability and Reactivity
Stability: It is stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: When heated to decomposition, emits bismuth oxide, fumes and liberates carbon dioxide.
Hazardous Polymerization: Will not occur.
Incompatibilities: Acids, Oxidizing agents.
Conditions to Avoid: Heat, incompatibles.
11. Toxicological Information
Acute toxicity: Not available.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC, ACGIH, OSHA and NTP.
12. Ecological Information
Environmental Fate: No information found.
Environmental Toxicity: No information found.
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container of and unused contents in accordance with federal, state and local requirements.
14. Transport Information
DOT (US): Not dangerous goods
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
15. Regulatory Information
TSCA 8(b) inventory: Bismuth subcarbonate
OSHA Hazards: No known OSHA hazards
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards: No SARA Hazards
CERCLA: No chemicals in this material with known CAS numbers are subject to the reporting requirements of CERCLA
Massachusetts Right To Know Components: No components are subject to the Massachusetts Right to Know Act.
Pennsylvania Right To Know Components: Bismuth subcarbonate CAS-No. 5892-10-4
New Jersey Right To Know Components: Bismuth subcarbonate CAS-No. 5892-10-4
California Proposition 65: This product does not contain any Proposition 65 chemicals
Canada WHMIS Hazard Class: Not found.
EINECS EC Number: 227-567-9Disclaimer:
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.