Muby Chemicals of Mubychem Group, established in 1976, is the original manufacturers of Specialty Chemicals, Pharmaceutical Excipient, Fragrance & Flavor chemicals, Shale Gas Fracturing Chemicals in India. Mubychem Group has several manufacturing facilities spread across Western India and world wide contacts and toll manufacturers. We are exporting globally to countries like USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya, Egypt, Nigeria, Cameroon, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Dubai, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, Italy, Portugal etc. The products are offered as per required specifications and in correct shape and size in mm or meshs or microns as specified by the buyer. The participating units have one or more accreditations like FDA - GMP approval; ISO-9001:2008 Certified; "REACH" Pre-registered; ISO-14001, ISO-22000:2005, FSSC 22000; ISO OHSAS 18001; Kosher Certified; Halal Certified; HACCP, FSSAI. We offer Commercial Pure & IP BP USP FCC Food Grade ACS AR Analytical Reagent Grades of Chemicals
Bookmark this Web Site Email This Page Info to a Colleague or Yourself
Search our website here
Dextrose USP NF FCC Food Grade Manufacturers, SDS GHS MSDS Sheet
Dextrose: CAS Number: Monohydrate 5996-10-1 Anhydrous 50-99-7, EINECS EC Number: 200-075-1, Molecular Formula: Monohydrate C6H12O6.H2O Anhydrous C6H12O6, Molecular Weight: Monohydrate 198.17 Anhydrous 180.16 , HS Code ---**
For SDS MSDS Sheet Click
SDS MSDS Sheet of Dextrose Manufacturers
Pure USP FCC Food Grade
Dextrose USP NF
D-Glucose monohydrate [5996-10-1].
Anhydrous 180.16 [50-99-7].
Dextrose is a sugar usually obtained by the hydrolysis of starch. It contains one molecule of water of hydration or is anhydrous.
Identification: Add a few drops of a solution (1 in 20) to 5 mL of hot alkaline cupric tartrate: a copious red precipitate of cuprous oxide is formed.
Color of solution: Dissolve 25 g in water to make 50.0 mL of solution: the solution has no more color than a solution prepared by mixing 1.0 mL of cobaltous chloride, 3.0 mL of ferric chloride, and 2.0 mL of cupric sulfate with water to make 10 mL, and diluting 3 mL of this solution with water to 50 mL. Make the comparison by viewing the solutions downward in matched color-comparison tubes against a white surface.
Specific rotation: between +52.6degrees and +53.2degrees.
Acidity: Dissolve 5.0 g in 50 mL of carbon dioxide-free water. Add phenolphthalein and titrate with 0.020 N sodium hydroxide to the production of a distinct pink color: not more than 0.30 mL is required for neutralization.
Water: Dry it at 105C for 16 hours: the hydrous form loses between 7.5% and 9.5% of its weight, and the anhydrous form loses not more than 0.5% of its weight.
Residue on ignition: not more than 0.1%.
Chloride: A 2.0-g portion shows no more chloride than corresponds to 0.50 mL of 0.020 N hydrochloric acid (0.018%).
Sulfate: A 2.0-g portion shows no more sulfate than corresponds to 0.50 mL of 0.020 N sulfuric acid (0.025%).
Arsenic: 1 ppm.
Heavy metals: Dissolve 4.0 g in water to make 25 mL of solution: the limit is 5 ppm.
Dextrin: Reflux 1 g of finely powdered Dextrose with 20 mL of alcohol: it dissolves completely.
Soluble starch, sulfites: To a solution of 1 g in 10 mL of water add 1 drop of iodine: the liquid is colored yellow.
Dextrose FCC Food Grade
D-Glucose; Glucose; Corn Sugar
C6H12O6 --- Formula wt 180.16 --- CAS: [50-99-7]
Dextrose occurs as white, crystalline granules or as a granular powder. It is purified and crystallized D-glucose. It is anhydrous or contains one molecule of water of crystallization. It is freely soluble in water, very soluble in boiling water, and slightly soluble in alcohol.
Function: Nutritive sweetener; humectant; texturizing agent.
Identification: Add a few drops of a 1:20 aqueous solution to 5 mL of hot alkaline cupric tartrate. A copious red precipitate of cuprous oxide forms.
Assay: Not less than 99.5% and not more than 100.5% of reducing sugar content (dextrose equivalent), expressed as Dglucose, calculated on the dried basis.
Arsenic: Not more than 1 mg/kg.
Chloride: Not more than 0.018%.
Lead: Not more than 0.1 mg/kg.
Loss on Drying: Anhydrous: Not more than 2.0%; Monohydrate: Not more than 10.0%.
Optical (Specific) Rotation: Between +52.6°degreeand +53.2degree after drying.
Residue on Ignition: Not more than 0.1%.
Starch: Passes test.
Sulfur Dioxide: Not more than 0.002%.
For Original Monographs of IP Indian Pharmacopoeia BP British Pharmacopoeia USP US Pharmacopoeia FCC Food Grade product, please check with the respective web-pages or books.
Ambernath Mumbai, Ankleshwar Gujarat, India
TEL: (OFFICE) 91-22-23770100, 23726950
Current Date Time in India GMT+5:30
USA & Canadian Customers may
Call toll-free 1-844-682-9243 (1-844-MUBYCHEM)
Copyright and Usual Disclaimer is Applicable.
Last 14 August, 2017
List of All the IP BP USP FCC ACS Grades of Chemicals Best Seller Fast Moving IP BP USP FCC ACS Grades of Chemicals Ex-stock Items Aluminum Chloride Hexahydrate Aluminium Potassium Sulphate Ammonium Bicarbonate Ammonium Bromide Ammonium Carbonate Ammonium Chloride Benzyl Alcohol Benzoic Acid Bismuth Citrate Bismuth Subcarbonate Borax; Sodium Borate Boric Acid Calcium Acetate Calcium Carbonate Calcium Chloride Calcium Hydroxide Calcium Levulinate Calcium Oxide Calcium Saccharate Calcium Sulfate Carbamide Peroxide Carmellose Carmellose Calcium Carmellose Sodium Chromic Chloride Citric Acid Cupric or Copper Chloride Ferric Chloride Hexahydrate Fumaric Acid Gentian Violet Glacial acetic Acid Magnesium Chloride Hexa & Anhydrous Magnesium Oxide Magnesium Stearate Magnesium Sulfate Hepta & Anhydrous Maleic Acid Malic Acid BP USP Manganese Chloride Manganese Sulfate Methylene Blue Oleic Acid Potash Alum Potassium Bitartrate, Cream of Tartar Potassium Bromide Potassium Carbonate Potassium Chloride Potassium Hydroxide Pellets Potassium Iodide Potassium Nitrate Propionic Acid Propylene Carbonate Selenious acid Sodium Acetate Sodium Bicarbonate Sodium Butyrate Sodium Carbonate Sodium Feredetate Sodium Fluoride Sodium Hydroxide Pellets Sodium Molybdate Sodium Perborate Sodium Propionate Sodium Selenite Pentahydrate Sodium Sulfate Sodium Tartrate Dihydrate Sodium Thiosulfate Stannous Chloride Dihydrate Stannous Fluoride Tartaric Acid Urea Zinc Carbonate Zinc Chloride Hot Items Ammonium Chloride Ammonium Persulfate Alpha Olefin Sulphonate Butylated Hydroxy Anisole Calcium Butyrate Calcium Chloride Calcium Nitrite Nitrate Ceric Ammonium Nitrate Copper Chloride Copper Sulfate Sulphate D-Glucuronolactone Hydrazine Hydrate DC Directly Compressible Calcium Carbonate Encapsulated Citric Acid Encapsulated Fumaric Acid Encapsulated Sodium Bicarbonate Isatoic Anhydride Magnesium Butyrate Octyldodecanol Picric Acid Sodium Acetate Sodium Bisulphate Skatole; 3-methylindole Sodium Diacetate Sodium Formaldehyde Bisulfite Zinc Chloride Zinc Sulphate
Exporters to USA Canada UAE Europe South Africa Tanzania Kenya Uganda Egypt Nigeria Turkey Mexico Brazil Argentina Chile Dubai etc.
Global or International Suppliers, Exporters, Importers, Manufacturers
I shall pass through this world, but once. If therefore, there is any good that I can do, or if there is any favor that I can show to a fellow human being, let me do it now. Let me not defer or neglect it. For I shall not tread this way again
Dextrose SDS MSDS Sheet, Material Safety Data Sheet
Section 1: Chemical Product and Company Identification
Product Name: Dextrose.
CAS Number: 50-99-7 for anhydrous and 5996-10-1 for monohydrate
EINECS EC Code: 200-075-1
Linear Formula: C6H8O6 (monohydrate has one molecule of H2O)
Molecular Weight: 180.16 for Anhydrous and 198.17 for Monohydrate
Recommended usage: Industrial Manufacturing.
Suppliers: As per letterhead.
Section 2: Hazards Identification
GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Labeling Regulation EC 1272/2008 (CLP) & GHS
GHS Label Elements
Signal Word: None
Hazards not otherwise classified (HNOC):
May causes mild skin irritation.
May causes mild eye irritation.
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.
Section 3: Composition and Information on Ingredients
Product Name: Dextrose.
CAS Number: 50-99-7 for anhydrous and 5996-10-1 for monohydrate
EINECS EC Code: 200-075-1
Section 4: First Aid Measures
Always seek medical advice after the first aid treatment.
Skin: Rinse with water. Soap may be used. Seek Medical Aid.
Eyes: Wash eyes with plenty of water for at least 15 minutes, lifting lids occasionally. Seek Medical Aid.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Ingestion: If swallowed, induce vomiting immediately after giving two glasses of water. Never give anything by mouth to an unconscious person.
Section 5: Fire and Explosion Data
Flammability of the Product: Non-flammable.
Products of Combustion: Oxides of Carbon.
Fire Fighting Media and Instructions: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Wear self-contained breathing apparatus for firefighting if necessary.
Section 6: Accidental Release Measures
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to legal requirements.
Large Spill: Do not inhale vapors, mist, or gas. Avoid dust formation. Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.
Section 7: Handling and Storage
Precautions: Do not breathe dust. Keep away from incompatibles such as oxidizing agents, acids.
Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area.
Section 8: Exposure Controls/Personal Protection
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits.
Personal Protection: Safety glasses. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent Gloves.
Personal Protection in Case of a Large Spill: Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product.
Section 9: Physical and Chemical Properties
Physical state and appearance: Solid white powder or crystals.
Melting point/freezing point: Melting point/range: 150 - 152C
Specific Gravity: NA.
pH (5% soln/water): NA.
Solubility: Soluble in water.
Section 10: Stability and Reactivity Data
Stability: It is stable in room temperature in closed containers under normal storage & handling.
Incompatibility with various substances: Avoid high temperatures, sparks, open flames and moisture. Avoid contact with strong oxidizing agents.
Polymerization: Will not occur.
Section 11: Toxicological Information
LD50 Oral - Rat - 25800 mg/kg
Carcinogenic Effects: Not a reported carcinogen by IARC, NTP, ACGIH, OSHA.
Section 12: Ecological Information
Toxicity to fish: NA.
BOD5 and COD: Not available.
Section 13: Disposal Considerations
Waste Disposal: Waste must be disposed of in accordance with federal, state and local environmental control regulations.
Section 14: Transport Information
DOT (US): Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
ADR/RID: Not dangerous goods
Section 15: Other Regulatory Information
SARA Section 302 Extremely Hazardous Substances: None of the chemicals in this product have a TPQ.
Section 313: No chemicals are reportable under Section 313.
SARA 311/312 Hazards: No SARA Hazards
California Prop 65: California No Significant Risk Level: None of the chemicals in this product are listed.
Section 16 - Additional Information
Our company provides this MSDS sheet in good faith but makes no representation as to its comprehensiveness or accuracy. This SDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. The above information has been compiled from various sources and has the possibility of discrepancy and being out-dated information. Individuals receiving the information must exercise their independent judgment and do further search in determining its appropriateness for a particular purpose. In no case shall our company be liable to loss or damages by the product user.